Pages:
Author

Topic: BITMAIN Antminer S1 support and OverClocking thread - page 17. (Read 144981 times)

full member
Activity: 149
Merit: 100
Yes i changed the first one to x.x.0.101, and its plugged into my router

im connecting now the s1 directly to the pc with ethernet cable, and its ip is x.x.1.99.
i changed the net settings (s1-pc) to x.x.1.x to open s1 ip address with browser, it shows the starting page and then that message
I'd suggest rebooting your pc, it'll sometimes get 'stuck' when changing ip addresses... especially on windows.

this didnt work, i think something is wrong in the software of the antminer, not in the connection
legendary
Activity: 1036
Merit: 1000
DARKNETMARKETS.COM
by the way - I cranked mine up to 420/33 today and was seeing over 215gh/s consistently without error but the temp got up to 47 so I backed it down to 410/34 and it's running about 205 right now - no errors temps 45 and below - fan speed 2,450

no errors.



Awesome Smiley Can you share frequency codes?
sr. member
Activity: 266
Merit: 250
by the way - I cranked mine up to 420/33 today and was seeing over 215gh/s consistently without error but the temp got up to 47 so I backed it down to 410/34 and it's running about 205 right now - no errors temps 45 and below - fan speed 2,450

no errors.

hero member
Activity: 616
Merit: 500
I got Satoshi's avatar!
Yes i changed the first one to x.x.0.101, and its plugged into my router

im connecting now the s1 directly to the pc with ethernet cable, and its ip is x.x.1.99.
i changed the net settings (s1-pc) to x.x.1.x to open s1 ip address with browser, it shows the starting page and then that message
I'd suggest rebooting your pc, it'll sometimes get 'stuck' when changing ip addresses... especially on windows.
full member
Activity: 149
Merit: 100
Yes i changed the first one to x.x.0.101, and its plugged into my router

im connecting now the s1 directly to the pc with ethernet cable, and its ip is x.x.1.99.
i changed the net settings (s1-pc) to x.x.1.x to open s1 ip address with browser, it shows the starting page and then that message
hero member
Activity: 616
Merit: 500
I got Satoshi's avatar!
Thanks, yes i had to set all to x.x.0.x

It's working now and happily mining Smiley

BUT, trying wth the second one, when i connect to its ip it gives me this nice message...

/usr/lib/lua/luci/dispatcher.lua:211: /etc/config/luci seems to be corrupt, unable to find section 'main'
stack traceback:
   [C]: in function 'assert'
   /usr/lib/lua/luci/dispatcher.lua:211: in function 'dispatch'
Great to hear you're up an running  Smiley

You're probably getting this because it's conflicting with the other miner if you have not changed the ip address. You need to change the ipv4 if the first miner to 192.168.0.98, so that you can connect the second one. Each device needs a unique ip address on the network.
newbie
Activity: 7
Merit: 0
anyone know the value for 365mhz and 370mhz?
just want to test it it out
full member
Activity: 149
Merit: 100
Hi guys, yesterday i got my first 2 antminer s1, but trying to set up one im going crazy!
I cant make it work but i think i did everything i found in variuous guides, in the screenshot u can see the settings, what's wrong?

I try to give you all the infos abput my connection
I have a router plugged into my modem, and pc is online through wifi
i plugged s1 to my pc, set net settings as u see in the screenshot, opened browser and typed default s1 address (192.168.1.99), set the WAN as u see. LAN is on dchp by default
then i set the pools.
But it doesnt work
If i plug the s1 to my modem with ethernet cable (on LAN2 slot, LAN1 goes into router), the s1 doesnt mine, and from pc i cant connect to s1 page. is it cause wifi address is 192.168.0.x?
i hope i gave u all the infos to find the error, i thank  in advance whoever will lose some time trying to help me! Smiley
I can't really read Italian(?), but there's a 192.168.0.111 in there that should probably be 192.168.1.111
that's the wifi config
OK, then I guess you need to change the IP of your miner to 192.168.0.99, so it is on the same subnet as your router and then it should pick up the internet. After that you'll need to change the IP of your PC to 192.168.0.XX to be able to reconnect to the miner and the internet.
but if i plug the miner directly into the modem, which is x.x.1.x, it doesnt work as well

btw, thanks Smiley
The fact that your comp is connected via wifi to the router and has the ip of 192.168.0.111, leads me to believe that that is what your router is assigning, so you need to change your miner to 192.168.0.99 so that it is on the same subnet, or you need to log in to your router and change it so that it assigns 192.168.1.xx to your network and you won't need to change the miner.

When you plugged the S1 into your pc, they were on the same subnet because you set that on your pc's lan ipv4, but your modem is on a different subnet because your Wifi is getting a different address automatically from the router. Your miner needs to be on the same subnet as the wifi to connect to the router and access the internet. Once they are all on the same subnet, you can connect the miner to the router and still access it from the PC, but only if they are on the same subnet.

Thanks, yes i had to set all to x.x.0.x

It's working now and happily mining Smiley


BUT, trying wth the second one, when i connect to its ip it gives me this nice message...


/usr/lib/lua/luci/dispatcher.lua:211: /etc/config/luci seems to be corrupt, unable to find section 'main'
stack traceback:
   [C]: in function 'assert'
   /usr/lib/lua/luci/dispatcher.lua:211: in function 'dispatch'

hero member
Activity: 616
Merit: 500
I got Satoshi's avatar!
Hi guys, yesterday i got my first 2 antminer s1, but trying to set up one im going crazy!
I cant make it work but i think i did everything i found in variuous guides, in the screenshot u can see the settings, what's wrong?

I try to give you all the infos abput my connection
I have a router plugged into my modem, and pc is online through wifi
i plugged s1 to my pc, set net settings as u see in the screenshot, opened browser and typed default s1 address (192.168.1.99), set the WAN as u see. LAN is on dchp by default
then i set the pools.
But it doesnt work
If i plug the s1 to my modem with ethernet cable (on LAN2 slot, LAN1 goes into router), the s1 doesnt mine, and from pc i cant connect to s1 page. is it cause wifi address is 192.168.0.x?
i hope i gave u all the infos to find the error, i thank  in advance whoever will lose some time trying to help me! Smiley
I can't really read Italian(?), but there's a 192.168.0.111 in there that should probably be 192.168.1.111
that's the wifi config
OK, then I guess you need to change the IP of your miner to 192.168.0.99, so it is on the same subnet as your router and then it should pick up the internet. After that you'll need to change the IP of your PC to 192.168.0.XX to be able to reconnect to the miner and the internet.
but if i plug the miner directly into the modem, which is x.x.1.x, it doesnt work as well

btw, thanks Smiley
The fact that your comp is connected via wifi to the router and has the ip of 192.168.0.111, leads me to believe that that is what your router is assigning, so you need to change your miner to 192.168.0.99 so that it is on the same subnet, or you need to log in to your router and change it so that it assigns 192.168.1.xx to your network and you won't need to change the miner.

When you plugged the S1 into your pc, they were on the same subnet because you set that on your pc's lan ipv4, but your modem is on a different subnet because your Wifi is getting a different address automatically from the router. Your miner needs to be on the same subnet as the wifi to connect to the router and access the internet. Once they are all on the same subnet, you can connect the miner to the router and still access it from the PC, but only if they are on the same subnet.
full member
Activity: 149
Merit: 100
Hi guys, yesterday i got my first 2 antminer s1, but trying to set up one im going crazy!
I cant make it work but i think i did everything i found in variuous guides, in the screenshot u can see the settings, what's wrong?

I try to give you all the infos abput my connection

I have a router plugged into my modem, and pc is online through wifi


i plugged s1 to my pc, set net settings as u see in the screenshot, opened browser and typed default s1 address (192.168.1.99), set the WAN as u see. LAN is on dchp by default

then i set the pools.

But it doesnt work

If i plug the s1 to my modem with ethernet cable (on LAN2 slot, LAN1 goes into router), the s1 doesnt mine, and from pc i cant connect to s1 page. is it cause wifi address is 192.168.0.x?

i hope i gave u all the infos to find the error, i thank  in advance whoever will lose some time trying to help me! Smiley


I can't really read Italian(?), but there's a 192.168.0.111 in there that should probably be 192.168.1.111

that's the wifi config
OK, then I guess you need to change the IP of your miner to 192.168.0.99, so it is on the same subnet as your router and then it should pick up the internet. After that you'll need to change the IP of your PC to 192.168.0.XX to be able to reconnect to the miner and the internet.

but if i plug the miner directly into the modem, which is x.x.1.x, it doesnt work as well

btw, thanks Smiley
hero member
Activity: 616
Merit: 500
I got Satoshi's avatar!
Hi guys, yesterday i got my first 2 antminer s1, but trying to set up one im going crazy!
I cant make it work but i think i did everything i found in variuous guides, in the screenshot u can see the settings, what's wrong?

I try to give you all the infos abput my connection

I have a router plugged into my modem, and pc is online through wifi


i plugged s1 to my pc, set net settings as u see in the screenshot, opened browser and typed default s1 address (192.168.1.99), set the WAN as u see. LAN is on dchp by default

then i set the pools.

But it doesnt work

If i plug the s1 to my modem with ethernet cable (on LAN2 slot, LAN1 goes into router), the s1 doesnt mine, and from pc i cant connect to s1 page. is it cause wifi address is 192.168.0.x?

i hope i gave u all the infos to find the error, i thank  in advance whoever will lose some time trying to help me! Smiley


I can't really read Italian(?), but there's a 192.168.0.111 in there that should probably be 192.168.1.111

that's the wifi config
OK, then I guess you need to change the IP of your miner to 192.168.0.99, so it is on the same subnet as your router and then it should pick up the internet. After that you'll need to change the IP of your PC to 192.168.0.XX to be able to reconnect to the miner and the internet.
full member
Activity: 149
Merit: 100
Hi guys, yesterday i got my first 2 antminer s1, but trying to set up one im going crazy!
I cant make it work but i think i did everything i found in variuous guides, in the screenshot u can see the settings, what's wrong?

I try to give you all the infos abput my connection

I have a router plugged into my modem, and pc is online through wifi


i plugged s1 to my pc, set net settings as u see in the screenshot, opened browser and typed default s1 address (192.168.1.99), set the WAN as u see. LAN is on dchp by default

then i set the pools.

But it doesnt work

If i plug the s1 to my modem with ethernet cable (on LAN2 slot, LAN1 goes into router), the s1 doesnt mine, and from pc i cant connect to s1 page. is it cause wifi address is 192.168.0.x?

i hope i gave u all the infos to find the error, i thank  in advance whoever will lose some time trying to help me! Smiley


I can't really read Italian(?), but there's a 192.168.0.111 in there that should probably be 192.168.1.111

that's the wifi config
hero member
Activity: 616
Merit: 500
I got Satoshi's avatar!
Hi guys, yesterday i got my first 2 antminer s1, but trying to set up one im going crazy!
I cant make it work but i think i did everything i found in variuous guides, in the screenshot u can see the settings, what's wrong?

I try to give you all the infos abput my connection

I have a router plugged into my modem, and pc is online through wifi


i plugged s1 to my pc, set net settings as u see in the screenshot, opened browser and typed default s1 address (192.168.1.99), set the WAN as u see. LAN is on dchp by default

then i set the pools.

But it doesnt work

If i plug the s1 to my modem with ethernet cable (on LAN2 slot, LAN1 goes into router), the s1 doesnt mine, and from pc i cant connect to s1 page. is it cause wifi address is 192.168.0.x?

i hope i gave u all the infos to find the error, i thank  in advance whoever will lose some time trying to help me! Smiley



I can't really read Italian(?), but there's a 192.168.0.111 in there that should probably be 192.168.1.111
hero member
Activity: 616
Merit: 500
I got Satoshi's avatar!
Weird.. when I modified the asic-freq file and then did a reboot in the control panel, it lost connection. I had to turn off the PSU and turn the Ant back on. My frequency changes, pool settings were the same. But password and network were reverted back to default.
If you change settings in the gui, you need to make sure you select "save & apply" or it won't actually save the settings to file and they will be lost when it reboots.

If you just click save, you'll notice some red text in the top right corner, clicking that takes you to a page listing all the changes that still need to be applied to file.
hero member
Activity: 818
Merit: 508
Hi guys, yesterday i got my first 2 antminer s1, but trying to set up one im going crazy!
I cant make it work but i think i did everything i found in variuous guides, in the screenshot u can see the settings, what's wrong?


I try to give you all the infos abput my connection

I have a router plugged into my modem, and pc is online through wifi


i plugged s1 to my pc, set net settings as u see in the screenshot, opened browser and typed default s1 address (192.168.1.99), set the WAN as u see. LAN is on dchp by default

then i set the pools.

But it doesnt work

If i plug the s1 to my modem with ethernet cable (on LAN2 slot, LAN1 goes into router), the s1 doesnt mine, and from pc i cant connect to s1 page. is it cause wifi address is 192.168.0.x?

i hope i gave u all the infos to find the error, i thank  in advance whoever will lose some time trying to help me! Smiley




Custom Dns needs to be at 8.8.8.8
full member
Activity: 149
Merit: 100
Hi guys, yesterday i got my first 2 antminer s1, but trying to set up one im going crazy!
I cant make it work but i think i did everything i found in variuous guides, in the screenshot u can see the settings, what's wrong?


I try to give you all the infos abput my connection

I have a router plugged into my modem, and pc is online through wifi


i plugged s1 to my pc, set net settings as u see in the screenshot, opened browser and typed default s1 address (192.168.1.99), set the WAN as u see. LAN is on dchp by default

then i set the pools.

But it doesnt work

If i plug the s1 to my modem with ethernet cable (on LAN2 slot, LAN1 goes into router), the s1 doesnt mine, and from pc i cant connect to s1 page. is it cause wifi address is 192.168.0.x?

i hope i gave u all the infos to find the error, i thank  in advance whoever will lose some time trying to help me! Smiley


newbie
Activity: 31
Merit: 0
I'm overclocked to 200 and I don't get any hardware errors...

my unit is brand new

jeff

Very Lucky!!  You have a perfect Antminer Wink
sr. member
Activity: 266
Merit: 250
I'm overclocked to 200 and I don't get any hardware errors...

my unit is brand new

jeff
full member
Activity: 168
Merit: 100
Can someone explain to me the stats and what each column means in the Miner Status tab or point me somewhere it mentions it?

Also, how do we calculate the total % of hardware errors? Looking at this https://bitcointalksearch.org/topic/m.3745184 it did the following:

HW / ( HW + DiffA + DiffR) = total percentage of hardware errors. Is this correct?

http://cryptomining-blog.com/tag/hw-error-formula/

Hey thanks! So overclocking to get 200 gh/s results in 2.8% hardware error. Not great for me...

6744 / (226556 + 383 + 6744) = .02885 * 100 = 2.88.

I will mess with it when I get back into town.

Random question. Do the settings like password and network settings reset when the Antminer loses power?

Only if you hard reset it. Not actually sure how to do that.

Weird.. when I modified the asic-freq file and then did a reboot in the control panel, it lost connection. I had to turn off the PSU and turn the Ant back on. My frequency changes, pool settings were the same. But password and network were reverted back to default.
sr. member
Activity: 308
Merit: 250
Double your Personal Bitcoin Funds.
I want to OC my ant S1s to something in between 350 and 375. Can anyone help with what settings I should run it on?
Pages:
Jump to: