Pages:
Author

Topic: BITMAIN Antminer S1 support and OverClocking thread - page 35. (Read 144941 times)

newbie
Activity: 18
Merit: 0

All my ant's average between 0.005% to 0.016% @ 375MHz, if I overclock to 400Mhz then the error rate can hit > 5% but then at 400Mhz that the total number of accepted shares on the pool is far smaller than expected and it is not financially worth it when electricity, etc is factored in.

Ok, I get 0% with 350 but when I try 375 I get like 7-10% HW.... Dunno what to try... My PSU is 550W.
hero member
Activity: 529
Merit: 501
Thanks a lot for the pointers gentlemen.
legendary
Activity: 1526
Merit: 1002
Bulletproof VPS/VPN/Email @ BadAss.Sx
That is indeed a high HW rate..
sr. member
Activity: 476
Merit: 250
I found my upper limit to 210gh/s average @425mhz



That is pretty nice, how are you cooling?

Lelemago
So that is 3.65% hw errors.
full member
Activity: 168
Merit: 100
what timeout are you using? 33?
full member
Activity: 168
Merit: 100
I found my upper limit to 210gh/s average @425mhz



That is pretty nice, how are you cooling?
sr. member
Activity: 252
Merit: 250
What is acceptable HW rate?

All my ant's average between 0.005% to 0.016% @ 375MHz, if I overclock to 400Mhz then the error rate can hit > 5% but then at 400Mhz that the total number of accepted shares on the pool is far smaller than expected and it is not financially worth it when electricity, etc is factored in.
legendary
Activity: 1526
Merit: 1002
Bulletproof VPS/VPN/Email @ BadAss.Sx
Which firmware?
newbie
Activity: 20
Merit: 0
I found my upper limit to 210gh/s average @425mhz

http://s28.postimg.org/bckokmz1l/proof210ok.jpg
full member
Activity: 168
Merit: 100
yes im using 0780 too, 203gh/s avrg seems to be the upper limit for me
legendary
Activity: 1526
Merit: 1002
Bulletproof VPS/VPN/Email @ BadAss.Sx
Personally i do not believe he runs it at 220Gh as i already tried 0780 with proper cooling. Screens of proof would be nice.
sr. member
Activity: 476
Merit: 250
Bitmain have open sourced S1 miner. Schematics are available so volt regulator data sheet and some instructions.
However, somebody with knowledge need to confirm what resistor to change or pencil mode.
The regulator is a 30AMP part and is running well beyond its rated limits.
Yes i know that, i post this regarding to earlier discussion. But high mhz have high hw errors with 1.1 v. So maybe solution is to modify v of the chips with pencil mode.
Need somebody to confirm which R to change and will that work.
newbie
Activity: 18
Merit: 0
What is acceptable HW rate?
member
Activity: 90
Merit: 10
Untitled
so how far can i push this machine without modyfing it? i mean i can take some extra cooler and put near but i dont want to mess with the design itself.
currently i made it to 220ghs. is it possible to push it higher?
Please post a screenshot of 220GH/s.  Undecided
newbie
Activity: 20
Merit: 0

You can find them here at the bottom: https://github.com/AntMiner/AntGen1/raw/master/manual/AntMiner%20FAQ.pdf
But its 25Mhz/step

yes, exactly i know. I want try 5Mhz to 5Mhz step increase.
 Smiley



I do not understand this, can you please explain?

this is the previous firmware, you can download fron Antminer Github.
full member
Activity: 168
Merit: 100


+ older FW: 20131212



I do not understand this, can you please explain?
member
Activity: 70
Merit: 10
someone can share code value from 400 to 425 in 5Mhz step?
for older FW 20131212 and new FW 20131226.
Thx

You can find them here at the bottom: https://github.com/AntMiner/AntGen1/raw/master/manual/AntMiner%20FAQ.pdf
But its 25Mhz/step
newbie
Activity: 20
Merit: 0
someone can share code value from 400 to 425 in 5Mhz step?
for older FW 20131212 and new FW 20131226.
Thx
legendary
Activity: 1526
Merit: 1000
the grandpa of cryptos
option 'freq_value'      '0780'

+ older FW: 20131212

+ a PSU with gold standart.


if this helped dont be scared to tip me!
full member
Activity: 168
Merit: 100
Ive tried until 450 mhz and it never does perform over the 203gh/s long term that everyone gets.

410 415 420 425 still gives the same results. At 450 hasing rate is 10 - 20% lower.


Please tell us how you got 220gh/s .
Pages:
Jump to: