Use stratum+tcp://etn.jedipool.com:9999 for what?
Mining etn. It's right there in the address.
Topic: Bitmain Antminer X3 -- 220KH+ Cryponight - 550W - page 24. (Read 18895 times)
Use stratum+tcp://etn.jedipool.com:9999 for what?
Mining etn. It's right there in the address.
how did you set up your miner 
stratum+tcp://us-east.cryptonight-hub.miningpoolhub.com:20596
chunry.chunry
x
That's my configuration but antminer says pool is dead, i've tried all servers not only us-east.
please help me.
I have same at the first time, it show DEAD.stratum+tcp://us-east.cryptonight-hub.miningpoolhub.com:20596
chunry.chunry
x
That's my configuration but antminer says pool is dead, i've tried all servers not only us-east.
please help me.
After I double check and corrected my Worker entry, it is running now.
Worker: YOUR_MINING_POLL_USERNAME.YOUR_WORKER_NAME
https://electroneum.miningpoolhub.com/index.php?page=gettingstarted
Beside MiningPoolHub, you should also try Suprnova, I manage to get 980 ETN/day.
Okay how much is ever one really earning per day and on what coin? Don't show me results on whattomine cryptonight bc all those numbers are inaccurate and nearly all those coins forked off into cryptonight 7 algo for gpu
Use stratum+tcp://etn.jedipool.com:9999 for what?
Was the first batch of X3 delivered?
Cheers W_M
Cheers W_M
how did you set up your miner
stratum+tcp://us-east.cryptonight-hub.miningpoolhub.com:20596
chunry.chunry
x
That's my configuration but antminer says pool is dead, i've tried all servers not only us-east.
please help me.
stratum+tcp://us-east.cryptonight-hub.miningpoolhub.com:20596
chunry.chunry
x
That's my configuration but antminer says pool is dead, i've tried all servers not only us-east.
please help me.
That's exactly how my miner is setup (also using us-east) and it is hashing at full speed. As long as you use your registered name it should work. Worker's name can be anything, and as far as I understand you don't need to create worker manually unless you want to, pool will add worker automatically based on your config (whatever you use after dot).
how did you set up your miner
stratum+tcp://us-east.cryptonight-hub.miningpoolhub.com:20596
chunry.chunry
x
That's my configuration but antminer says pool is dead, i've tried all servers not only us-east.
please help me.
stratum+tcp://us-east.cryptonight-hub.miningpoolhub.com:20596
chunry.chunry
x
That's my configuration but antminer says pool is dead, i've tried all servers not only us-east.
please help me.
electroneum.miningpoolhub.com is hashing at advertised speeds for me.
so is XMC on antpool the only working pool that pays out as expected?
I don't want to risk mining coins that forked off already or not hashing as expected.
I don't want to risk mining coins that forked off already or not hashing as expected.
It will be a mess if that doesn’t work and if they drop before the XMR.
Your ETN pool wont connect, and your Bytecoin connects but never gets anything accepted.
Since more people are looking for Mining ETN now nice TODAY it is more profitable.. I have just added support to X3 miner on our ETN pool as well.
I tested and it is working.
Just use: stratum+tcp://etn.jedipool.com:9999
and monitor:
http://etn.jedipool.com/
Pool fee is 0.1%
I tested and it is working.
Just use: stratum+tcp://etn.jedipool.com:9999
and monitor:
http://etn.jedipool.com/
Pool fee is 0.1%
Any guide to set up the X3 for this?
Since more people are looking for Mining ETN now nice TODAY it is more profitable.. I have just added support to X3 miner on our ETN pool as well.
I tested and it is working.
Just use: stratum+tcp://etn.jedipool.com:9999
and monitor:
http://etn.jedipool.com/
Pool fee is 0.1%
I tested and it is working.
Just use: stratum+tcp://etn.jedipool.com:9999
and monitor:
http://etn.jedipool.com/
Pool fee is 0.1%
Alright BCN Jedi Pool is officially supporting Bitmain Antminer X3 now. There was an issue and it is now fixed.
Create a Bytecoin wallet.
1. https://bytecoin.org/downloads
Don't use web wallet. -> as far as I know it is not working.
2. Configure your X3 to point to bcn.jedipool.com
URL: stratum+tcp://bcn.jedipool.com:9999
3. Monitor: http://bcn.jedipool.com
Wait at least 30 minutes to see your Hashrate increase.
Get Support at Jedi Pool Discord channel: https://discord.gg/APs4h8
Create a Bytecoin wallet.
1. https://bytecoin.org/downloads
Don't use web wallet. -> as far as I know it is not working.
2. Configure your X3 to point to bcn.jedipool.com
URL: stratum+tcp://bcn.jedipool.com:9999
3. Monitor: http://bcn.jedipool.com
Wait at least 30 minutes to see your Hashrate increase.
Get Support at Jedi Pool Discord channel: https://discord.gg/APs4h8
ETN until the fork, then on ByteCoin or perhaps NiceHash once the issue has been fixed.
Answer from NiceHash
https://support.bitmain.com/hc/en-us/articles/360003515573/comments/360000293394
Quote
Cryptonight algorithm that X3 uses is a bit different than what we use.
What will be next...
I assume that from the list of these coins
Monero Original (XMO)
Monero Classic (XMC)
The most promising Karbo (KRB).
As an option - try the pools http://explorer.karbowanec.com/#pools
I am sure that such a might of the miner will not die off for nothing!
Quote
Dinastycoin (DCY)
DigitalNote (XDN)
Electroneum (ETN) = Fork 30 May
Bytecoin (BCN) = NOT forking soon
Karbo (KRB)
+DigitalNote (XDN)
Electroneum (ETN) = Fork 30 May
Bytecoin (BCN) = NOT forking soon
Karbo (KRB)
Monero Original (XMO)
Monero Classic (XMC)
The most promising Karbo (KRB).
As an option - try the pools http://explorer.karbowanec.com/#pools
I am sure that such a might of the miner will not die off for nothing!
I tried minergate.com as well and was getting super low hash rates on XMO and XDN.
Anyone out there interested in standing up an XDN pool that can support the X3?
For XDN I found the following calculation of USD 55/day: https://whattomine.com/coins/104-xdn-cryptonight?utf8=%E2%9C%93&hr=220.0&p=140.0&fee=0.0&cost=0.1&hcost=0.0&commit=CalculateAnyone out there interested in standing up an XDN pool that can support the X3?
I heard of a team that might be interested in setting up a pool for ASICs if some miners are interested.
I would definitely participate.
the conductive part should be made of 24K gold it will be great.
But what are you going to rumble on?
ETN until the fork, then on ByteCoin or perhaps NiceHash once the issue has been fixed.
Hey Guys,
I am going to mine Bytecoin (BCN) for a while since they officially announce their support for ASIC miners.
https://bytecoin.org/blog/the-asic-statement-clarification-from-the-bytecoin-team
I am having an issue with the Antminer X3 that it shows on the device that it is hashing about 235KH but it is is only getting up to 50KH at the pool.
Pool: http://bcn.jedipool.com/
I just tried to change the to fixed diff and port and the hash rate only got worse, went down to 5KH.
Any ideia? I am in contact with the guy that is running the pool. It looks like pool takes anything. Nicehash works fine there we just sent 10MH there without a problem.
Thanks!
I am going to mine Bytecoin (BCN) for a while since they officially announce their support for ASIC miners.
https://bytecoin.org/blog/the-asic-statement-clarification-from-the-bytecoin-team
I am having an issue with the Antminer X3 that it shows on the device that it is hashing about 235KH but it is is only getting up to 50KH at the pool.
Pool: http://bcn.jedipool.com/
I just tried to change the to fixed diff and port and the hash rate only got worse, went down to 5KH.
Any ideia? I am in contact with the guy that is running the pool. It looks like pool takes anything. Nicehash works fine there we just sent 10MH there without a problem.
Thanks!
Jump to: