Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order - page 268.

JaredKaragen

legendary

Activity: 1848

Merit: 1166

My AR-15 ID's itself as a toaster. Want breakfast?

Quote from: BITMAIN on August 05, 2016, 02:10:03 AM

Quote from: procrastinator on August 02, 2016, 05:27:54 PM

Hi folks,
do you know smth about Antminer S9 certification?
Previous Bitmain's products were certified according to FCC/CE rules but I can't find any info about S9.

Hello procrastinator

Please find the FCC and CE certificates of conformity for the Antminer S9 at this link: http://support.bitmain.com/hc/en-us/articles/224442167-Certificate-of-Conformity-for-S9

For any queries or information, please Submit a Ticket to us at support.bitmain.com

Regards,

the Bitmain team

But you wont say a word about violating software licensing....... software you are profiting from vital to the operation of your device..... ya know....

BITMAIN

hero member

Activity: 741

Merit: 514

https://www.bitmain.com

Quote from: procrastinator on August 02, 2016, 05:27:54 PM

Hi folks,
do you know smth about Antminer S9 certification?
Previous Bitmain's products were certified according to FCC/CE rules but I can't find any info about S9.

Hello procrastinator

Please find the FCC and CE certificates of conformity for the Antminer S9 at this link: http://support.bitmain.com/hc/en-us/articles/224442167-Certificate-of-Conformity-for-S9

For any queries or information, please Submit a Ticket to us at support.bitmain.com

Regards,

the Bitmain team

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

Quote from: Xircom on August 04, 2016, 04:32:39 PM

Quote from: NotFuzzyWarm on August 04, 2016, 08:03:50 AM

Quote from: jackcantrell on August 03, 2016, 08:19:04 PM

Working on remote monitoring of S9's, and the RPC API command 'devs' is not working for me. 'pools', 'summary', 'config', 'version' work fine and return information. 'devs' works on S7's.

Any suggestions on how to get the 'devs' info off the S9's using API or any other type of scripting from a linux box to the miner?

Most likely need to change the s9 miner software from Restricted API access to Privileged same as some s7's need done?

Just had to do this on freaking 50 pcs S7 Angry

Ouch!
I know the last 2 s7's I bought (b18) are set to Restricted as well as 1-2 others from earlier batches.

To do it I assume I'd use PuTTY to SSH in but from there...
Where is the config file located?
What editor and more to the point, what commands are used to change the permissions?

And of course, wonder if this works with Bitmain's fork of Kano's CGminer on the s9? ...

Xircom

legendary

Activity: 938

Merit: 1000

Quote from: NotFuzzyWarm on August 04, 2016, 08:03:50 AM

Quote from: jackcantrell on August 03, 2016, 08:19:04 PM

Working on remote monitoring of S9's, and the RPC API command 'devs' is not working for me. 'pools', 'summary', 'config', 'version' work fine and return information. 'devs' works on S7's.

Any suggestions on how to get the 'devs' info off the S9's using API or any other type of scripting from a linux box to the miner?

Most likely need to change the s9 miner software from Restricted API access to Privileged same as some s7's need done?

Just had to do this on freaking 50 pcs S7 Angry

NotFuzzyWarm

legendary

Activity: 3822

Merit: 2703

Evil beware: We have waffles!

Quote from: jackcantrell on August 03, 2016, 08:19:04 PM

Working on remote monitoring of S9's, and the RPC API command 'devs' is not working for me. 'pools', 'summary', 'config', 'version' work fine and return information. 'devs' works on S7's.

Any suggestions on how to get the 'devs' info off the S9's using API or any other type of scripting from a linux box to the miner?

Most likely need to change the s9 miner software from Restricted API access to Privileged same as some s7's need done?

IconFirm

hero member

Activity: 1438

Merit: 574

Always ask questions. #StandWithHongKong

Quote from: kano on August 04, 2016, 05:53:54 AM

Quote from: devttys0 on July 19, 2016, 04:34:15 AM

Quote

S9's firmware package with bmminer's binary application file is in preparing, Need get some files from ALTERA FPGA's project. We will upload the sdk of S9 which can be used to create S9's firmware package. The estimation time is about next week.

Please feel free to contact us if there is any question.

Best regards,
Andy
Bitmain

I got a response back from their support department, looks like they should be uploading the S9 firmware SDK next week.

So hah they fucked you over also.
No sign of that source code ...
... requesting thread lock by mods.

That's a great idea. Can anyone request this - if so, how?

kano

legendary

Activity: 4592

Merit: 1851

Linux since 1997 RedHat 4

Quote from: devttys0 on July 19, 2016, 04:34:15 AM

Quote

S9's firmware package with bmminer's binary application file is in preparing, Need get some files from ALTERA FPGA's project. We will upload the sdk of S9 which can be used to create S9's firmware package. The estimation time is about next week.

Please feel free to contact us if there is any question.

Best regards,
Andy
Bitmain

I got a response back from their support department, looks like they should be uploading the S9 firmware SDK next week.

So hah they fucked you over also.
No sign of that source code ...
... requesting thread lock by mods.

kano

legendary

Activity: 4592

Merit: 1851

Linux since 1997 RedHat 4

Quote from: jackcantrell on August 03, 2016, 08:19:04 PM

Working on remote monitoring of S9's, and the RPC API command 'devs' is not working for me. 'pools', 'summary', 'config', 'version' work fine and return information. 'devs' works on S7's.

Any suggestions on how to get the 'devs' info off the S9's using API or any other type of scripting from a linux box to the miner?

Well I did write a VERY LONG API-README that describes the API I wrote ... but go figure.
If they broke the API ... why would anyone be surprised Tongue

yslyung

legendary

Activity: 1500

Merit: 1002

Mine Mine Mine

API command: summary
{
"STATUS": [
{
"STATUS": "S",
"When": 1470279968,
"Code": 11,
"Msg": "Summary",
"Description": "bmminer 1.0.0"
}
],
"SUMMARY": [
{
"Elapsed": 47881,
"GHS 5s": "13887.04",
"GHS av": 13952.04,
"Found Blocks": 0,
"Getworks": 1675,
"Accepted": 13972,
"Rejected": 60,
"Hardware Errors": 390,
"Utility": 17.51,
"Discarded": 25652,
"Stale": 25,
"Get Failures": 1,
"Local Work": 2454335,
"Remote Failures": 1,
"Network Blocks": 90,
"Total MH": 668037852482.0,
"Work Utility": 196498.51,
"Difficulty Accepted": 156167404.0,
"Difficulty Rejected": 641727.0,
"Difficulty Stale": 0.0,
"Best Share": 48232771,
"Device Hardware%": 0.0002,
"Device Rejected%": 0.4092,
"Pool Rejected%": 0.4092,
"Pool Stale%": 0.0,
"Last getwork": 1470279968
}

jackcantrell

newbie

Activity: 28

Merit: 0

Working on remote monitoring of S9's, and the RPC API command 'devs' is not working for me. 'pools', 'summary', 'config', 'version' work fine and return information. 'devs' works on S7's.

Any suggestions on how to get the 'devs' info off the S9's using API or any other type of scripting from a linux box to the miner?

mamiakimo

full member

Activity: 197

Merit: 100

after 9 hours i fond 2 PCB stopped , what is the reason of that ?
after software rebooting they return to work

mavericklm

hero member

Activity: 742

Merit: 500

Quote from: procrastinator on August 02, 2016, 05:27:54 PM

Hi folks,
do you know smth about Antminer S9 certification?
Previous Bitmain's products were certified according to FCC/CE rules but I can't find any info about S9.

Dream on!

::)Certification Roll Eyes

procrastinator

newbie

Activity: 1

Merit: 0

Hi folks,
do you know smth about Antminer S9 certification?
Previous Bitmain's products were certified according to FCC/CE rules but I can't find any info about S9.

not.you

legendary

Activity: 1726

Merit: 1018

With BTC falling I can't see any pricing that is going to work for bitmain. Anything close to 3 BTC is going to take a year to ROI and right now that's looking to be $1600 and on it's way to sub $1500 from the looks of things.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: bitcoinbarron on August 02, 2016, 02:19:14 PM

With the price of bitcoin falling like a stone, they would be silly to try $1800 dollar a unit again.

would not hurt to list at 12th spec and 1800usd see the sales for a few days. if it does sell well cool.

if it does not sell well end the batch say it sold out wait a day or two and then list lower.

Say 1600 and say 11.85 spec to make buyers think it is different.

Just saying. If I had the only miner to sell I would consider the above move. And I am known to be pretty honest on this site. In fact I give coins aways on my guess the difficulty thread. ( no charges at all)

bitcoinbarron

member

Activity: 68

Merit: 10

With the price of bitcoin falling like a stone, they would be silly to try $1800 dollar a unit again.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: mamiakimo on August 02, 2016, 11:59:11 AM

100C after 2 hours

try freq 587 vs 600

your error rate is good

I would think a very slight freq drop will get you a little better temp wise

mamiakimo

full member

Activity: 197

Merit: 100

100C after 2 hours

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: mamiakimo on August 02, 2016, 10:02:54 AM

first mine in my life
is this temp high ?

it is just okay

69 - 100 is as high as I would go.

If you drift over that you could alter the freq just a bit lower. say 600 down to 593 or 587

your errors are good 0.0005% is very good.

see what you have after 2 hours

then after 4 hours

mamiakimo

full member

Activity: 197

Merit: 100

first mine in my life
is this temp high ?

Topic: Bitmain's Released Antminer S9, World's First 16nm Miner Ready to Order - page 268. (Read 531168 times)