Black Arrow 28nm 100Ghash Bitcoin ASIC from $0.49/GH/s - page 154.

ChuckBuck

hero member

Activity: 1372

Merit: 783

better everyday ♥

Quote from: bobsag3 on June 09, 2014, 11:17:28 AM

Our X1 is out for delivery, should have it within 2-3 hours.

I also have confirmation the new X1 controller is working, and according to BA the full X1 backlog will be built tested and shipped within the next 2-3 weeks. Performance with the new controller seems to peak around ~130gh.

Remember pics once you get it, or it didn't happen! Tongue

Eager to see to what these guys look like in the wild, dam a painful 4 month delay! Cool

sorehammer

sr. member

Activity: 504

Merit: 250

What do you make off the news about the fixed control board bobsag

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

Quote from: sorehammer on June 09, 2014, 11:20:34 AM

Quote from: bobsag3 on June 09, 2014, 11:17:28 AM

Our X1 is out for delivery, should have it within 2-3 hours.

I bet your as kiddy as a school girl waiting

Got that right. Too bad I just got off... ~40 hours of flying or so so im not even sure what time zone im in.

sorehammer

sr. member

Activity: 504

Merit: 250

Quote from: bobsag3 on June 09, 2014, 11:17:28 AM

Our X1 is out for delivery, should have it within 2-3 hours.

I bet your as kiddy as a school girl waiting

AchrafB

member

Activity: 72

Merit: 10

Police, Android... Just keep talkin between u and let codes and bitcoin laws outside cuz like a see only a minority here are really suffering from what happen with this trolls collectif and Holy BA

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

Our X1 is out for delivery, should have it within 2-3 hours.

I also have confirmation the new X1 controller is working, and according to BA the full X1 backlog will be built tested and shipped within the next 2-3 weeks. Performance with the new controller seems to peak around ~130gh.

coolmusic

member

Activity: 87

Merit: 10

Quote from: raskul on June 09, 2014, 01:16:01 AM

I am glad that tracyhh has gotten the police involved, it's way beyond the time this should have happened.

Sorry but this show absolute ignorance about civil and criminal code and how the law works.

exactly what you think will do the police? Arrest someone? close the factory? freeze the BA assets? in which accusations?

God knows I'm not a BA fanboy and I'm pissed off just like everybody in this thread but please use your brain and common sense.

primer10

sr. member

Activity: 249

Merit: 250

I would have them deliver with RPi than waiting for them to fix their control board (which by the way was not communicated nor announced prior)

mtbitcoin

legendary

Activity: 876

Merit: 1000

Etherscan.io

Quote from: ?? on ??

Quote from: Stedsm on June 09, 2014, 06:43:32 AM

We are now able to deliver full functionality to X1 customers.

How about an update for the X3 customers.

+1

Stedsm

legendary

Activity: 3052

Merit: 1273

Quote from: ChuckBuck on June 09, 2014, 07:47:05 AM

Not sure what that means. Does it mean there will be LCDs and the X-1s won't require RPi's anymore?

How does that affect shipping time, will it delay it even more?

BA, always talking in puzzles never giving straight answers.

The RPI was only temporary until the control board worked as designed,so no they won't require a RPi. They have shown before the LCDs and the uploading of the Android software for,so yeas the X-1s will have the LCDs. This should speed up production. The case and wifi are still unclear,they should have the plastic case by now.

AchrafB

member

Activity: 72

Merit: 10

since you start making this thread shitty with frivolous accusations and stupid humor that has created a kind of endless trilogy
BA you must rearrange the blow and please don't confuse businness, emotions and especially in regards to your serious orders when some are on the verge of bankruptcy by relying on bitcoin and You because personnaly i dont give a fuck about X1 LCD and the damn interface I buy a functional Minions for only task is hashing :/ made things happen in the interest of TIME of everyone

ChuckBuck

hero member

Activity: 1372

Merit: 783

better everyday ♥

Quote from: Stedsm on June 09, 2014, 06:43:32 AM

From BlackArrow
Advanced Member
Moderators
146 posts

Posted Today, 06:59 AM

We just had a breakthrough: The control board is now working as designed.

We are now able to deliver full functionality to X1 customers.

Please check the below picture showing an X1 miner hashing with the control board at 120Ghash.

http://ecointalk.net...-183939-resize/

Not sure what that means. Does it mean there will be LCDs and the X-1s won't require RPi's anymore?

How does that affect shipping time, will it delay it even more?

BA, always talking in puzzles never giving straight answers.

Vcore

newbie

Activity: 28

Merit: 0

Of course I can't be sure but software control of vcore is quite standar in modern computers and problems appart it is clear that prosperos are beautifuly designed so it wouldn't surprise me if they had it. At the very least they should have it but not exposed in the interface if just because it is a convenient way for them to do a late change without changing resistors. Anyway if they don't have it or if the range is insuficient I would also like knowing wich pwm controller they use ;-).

The psu might limit the oc but I am meaning to go sub 0 and I hope that means a significant reduction in leakage and I hope that it might be enough to offset the increase due to higher frequency (if those things love vcore then we are screwed as the relationship with power draw is quadratic at the least).
Also it would be hard finding more powerful power suplies, it would be expensive and if you have to pay electricity it would be too expensive if it is going to be over 4500W per X3.

I hold hopes of getting answers because it is David's personal miner. And I don't see why wouldn't he want to test it and share the results with us.

Stedsm

legendary

Activity: 3052

Merit: 1273

From BlackArrow
Advanced Member
Moderators
146 posts

Posted Today, 06:59 AM

We just had a breakthrough: The control board is now working as designed.

We are now able to deliver full functionality to X1 customers.

Please check the below picture showing an X1 miner hashing with the control board at 120Ghash.

http://ecointalk.net...-183939-resize/

TheMinex

newbie

Activity: 54

Merit: 0

Quote from: Vcore on June 09, 2014, 02:26:32 AM

david105396 as you will get your miner soon I am very interested in some information.

The relationship between temperature and overclocking.
The relationship between vcore (not me lol) and overclocking.
The relationship between temperature and power consumption.

We'r all interested in this, but let me ask you why you'r so sure we'll be able to friendly control you (hups, I mean voltages Grin

) throug the interface. ( just to speculate between us )
In past posts I rise some questions ( screeenshot showing 80° after 2 min, possibility in psu bottleneck in OC with consequently wasted money for those who keep the psu while compensation scheme appear IN PROGRESS ) thinking that could be usefull ( BA is clearly in develop stage in which tweaks can be possible ).

However I don't expect any answer cause queue is just too long. So tierd. Embarrassed

Vcore

newbie

Activity: 28

Merit: 0

david105396 as you will get your miner soon I am very interested in some information.

The relationship between temperature and overclocking.
The relationship between vcore (not me lol) and overclocking.
The relationship between temperature and power consumption.

If there is enough overhead in the stock heatsink you could test it by controlling the fan manually and setting it to the maximum. If there isn't it will also be interesting.

My guesses are that overclocking will be heavily dependent on temperature a midly on voltage hitting thermal limits with slight increases on vcc while on stock cooling, I also think that it is quite likelly that there is a significant decrease in power consumtion with decreased temperatures. For those things to be really noticeable we need at least 20ºC of difference.

That information would really help us extracting the best overclocking and or getting a better hash/w. I am building a custom cooling and it would help me quite a bit.
Also, what is the maximum overclocking and voltage that the interface/hardware lets you set? (even if it will never reach it with aircooling it might with water or phase change and what could be reached could determine what kind of cooling is worth).

ernie-

sr. member

Activity: 252

Merit: 250

Quote from: taipo on June 09, 2014, 02:07:26 AM

So on their site they say their X-1 and X-3 are in stock, this is obviously not the case then?

They may well be in stock in one form or another, however that doesn't mean they have shipped any.

taipo

full member

Activity: 238

Merit: 100

Kia ora!

So on their site they say their X-1 and X-3 are in stock, this is obviously not the case then?

ernie-

sr. member

Activity: 252

Merit: 250

Quote from: taipo on June 09, 2014, 01:58:51 AM

Ok, to save me reading back through 266 pages, what has BlackArrow delivered so far?

Nothing that I know of based on the Minion ASIC to an end user, unless I missed something.

taipo

full member

Activity: 238

Merit: 100

Kia ora!

Ok, to save me reading back through 266 pages, what has BlackArrow delivered so far?

Topic: Black Arrow 28nm 100Ghash Bitcoin ASIC from $0.49/GH/s - page 154. (Read 787050 times)