Timeline of Matt Carson's datacenter locations.
BUILDING #1: Purchased the building, awaiting infrastructure.
Building was purchased today!
All the wiring and infrastructure equipment arrives tomorrow-Wednesday. Over 400lb. Poor UPS man
Thanks- Ill be moving to a custom made facility here in under 3 weeks.
BUILDING #2: Moving to a better facility here (still in Missouri) located 90 miles away.
Major Update!
We will be moving to a much large, much better facility here by the end of the month. There may be a short down time (its only a 90mi drive) while being setup at the new facility, but we will not be turning anything off right up to the last minute.
Major Update!
We will be moving to a much large, much better facility here by the end of the month. There may be a short down time (its only a 90mi drive) while being setup at the new facility, but we will not be turning anything off right up to the last minute.
Building acquired I cant answer on the software but I can on the shipping. Looks like the boards should be done here within 48 hours, and then will be dispatched after a small amount of testing to AUS, and me in the US. At least from me, all boards will then be tested again (Not sure how long... suggestions?) and then immediatly shipped out same day via UPS Next Day/2nd Day air [depending on location]. As soon as we know the boards are done, we can give concrete delivery.
I'd sample test say 1/10th of the boards for a few hours on testnet. That'd be my recommendation
Yeah I can do that. *might* be able to live stream, or atleast upload a ton of pictures.
I will be shipping from MO. Middle of the country, and if your anywhere close to me Im ok with local pickup
.
And I just want to say guys - Barn has been working very hard behind the screens to bring this all together... this stuff is immensely complex.
Here we are, on November 18th, and Matt still has his datacenter in Missouri at the second facility:
This is why I went from garage > warehouse > bigger warehouse. Heat is nuts.
Shenzhen, China 11/26/2013 8:05 P.M. Departure Scan
Yea, but do the thumbs have any tracking info? When you get the board delivery after a quick run though where are they coming from for you. I seem to expect California.
No idea on the thumbs- thats all Barn.
I will be shipping out from Central MO.Does anyone have any details regarding power consumption. The genesis block calculator says expected power usage per unit to be 2100 watts. I am afraid for me that's not going to work. To be honest I was expecting something that would work on a residential 120v circuit. They also do not offer any hosting yet unfortunately.
I got ya covered
But yeah that is kind of silly.
Im glad when I put my new facility together I decided to say fuck it and got all 240vNovember 26th, edited on the 28th, Matt Carson is still in Missouri at the second facility:
https://bitcointalksearch.org/topic/m.3723600
No problem. Im having a 400A 240V pannel installed just for the 2kw+ miners that seem to be coming out.
On December 12, 2013, fresh back from China, Matt Carson posted the following... BTW, still located in Missiouri:This makes no sense financially and if it's going to be hosted in a data center it should be using specialized GPU mining racks that can run more GPUs per motherboard/CPU. You really need open racks and to use PCI-E riser ribbons if you want to build a GPU mining rig, using a desktop computer case makes no sense especially because heat is a huge issue with scrypt mining. Also to be honest, scrypt mining is VERY finicky compared to SHA256 mining, you're talking about constant lockups and crashes if heat isn't perfectly controlled. The amount of time that's going to go into keeping everything running is going to be much higher than with bitcoins and given how the Bitfury towers already caused a ton of problems I'm not sure the coop has enough manpower to keep racks of scrypt miners up and running.
The new facility comes with me also having hired 6 more people to help out. I am currently training them right now. On December 13, Matt Carson hired additional staff to work at his Missouri-based datacenter, to date not mentioning Denver even once.
I am working with them right now for me to help with their tickets, so we can get the response time much faster. I have hired additional staff that start work here in a few weeks, and I know they are working hard to improve their systems.
I cant speak on the refunds unfortunately, I am still discussing the options with them.
Four hours later, Matt mentions for the first the move to Denver, right after somebody ask about local pickup since he lives in KC. Did his new hires move to Denver with him?We will offer local pickups- but
we are moving to a massive new facility in CO, so pickups will have to be from there
.
ALSO: I now have access to the BA ticket system, so if you need a response feel free to PM and I can at least check on the status for you.
https://bitcointalksearch.org/topic/minersourcenet-miner-hosting-llc-cheap-and-secure-hosting-and-sales-288012We are all moved into the new place, lots of updates and pictures to come!
BUILDING #3:Somewhere in Colorado, in some warehouse with 16-18 foot ceilings, ideally well-suited for bitcoin miners that love fiberglass dust sourced from the exposed insulation in the ceilings and walls, blown free from the constantly moving vortex of air due to the industrial-sized air conditioning unit(s). Whatever you do, don't open up that massive overhead door that's probably not well-sealed, otherwise you'll really have the dust a flying.
This has been the third time you're on record in stating that you only moved once. Care to try for a forth time?
~TMI
BTCITW