[Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 120.

Kaezar

newbie

Activity: 73

Merit: 0

Quote from: oxzhor on November 29, 2017, 03:29:19 PM

Quote from: Kaezar on November 29, 2017, 02:48:24 PM

Quote

You mean the Frequency (%) -30 and Frequency (MHz) 1100 right?

yes

Hehe it gives a blue screen with 1100 - 1105 Grin

and HBCC is disable now.

vega 56 or vega 64?! 1100 - 1105 for vega64(or vega 56 with vega64 bios). 955-960 for vega56!

oxzhor

newbie

Activity: 46

Merit: 0

Quote from: Kaezar on November 29, 2017, 02:48:24 PM

Quote

You mean the Frequency (%) -30 and Frequency (MHz) 1100 right?

yes

Hehe it gives a blue screen with 1100 - 1105 Grin

and HBCC is disable now.

ShirKhan76

newbie

Activity: 23

Merit: 0

I'm wondering if anyone tried to mine Electroneum with Cast XMR miner.

I guess it should work because both are based on CryptoNight algo.

The ETN rewards are pretty good at the moment.

Regarding https://whattomine.org and my 6100 h/s

Monero: 0.090978 XMR per day = $16.78 (1 XMR = 0.01761003 BTC)
Electroneum: 534 ETN per day = $23.99 (1 ETN = 0.00000426 BTC)

Greetz

ShirKhan76

Kaezar

newbie

Activity: 73

Merit: 0

Quote

You mean the Frequency (%) -30 and Frequency (MHz) 1100 right?

yes

oxzhor

newbie

Activity: 46

Merit: 0

Quote from: Kaezar on November 29, 2017, 02:13:17 PM

Quote

Try change page file to disable, reboot, set new settings around 64000 and reboot. Try start all 4 cards.
and... 2389.8 H/s GPU0 - its not possible on vega.. 2050+- max.. hmm...
You play with overclocking settings, registry edit, etc.. ?
What OS? Clean win 10 x64 ?

Yes finally this Try change page file to disable, reboot, set new settings around 64000 and reboot. Try start all 4 cards. did the trick!.
Thank you very much.

Code:

[Pool: 'pool.supportxmr.com:7777' | Connected: 2017-11-29 18:45:54]
  0:01:02 (100%) Online
  0:00:00 (  0%) Offline

[Job: #2 | Difficulty: 53550 | Running: 47.0 sec | Avg Job Time: 14.0 sec]

[Hash Rate Avg: 7750.7 H/s]
  1910.6 H/s GPU0
  1955.5 H/s GPU1
  1937.9 H/s GPU2
  1946.7 H/s GPU3

[Shares Found: 9 | Avg Search Time: 7.0 sec]
   8 ( 89%) Accepted
   0 (  0%) Rejected by pool
   0 (  0%) Invalid result computation failed
   0 (  0%) Could not be submit because of network error
   1 ( 11%) Outdated because of job change

Now turn HBCC off, set in Wattman GPU -10(30) and memory to 1100-1105. and you will get around 2000+h/s

Code:

"devices": [
	{
		"device": "GPU0",
		"device_id": 0,
		"hash_rate": 2045662,
		"hash_rate_avg": 2034352,
		"gpu_temperature": 55,
		"gpu_fan_rpm": 4522
	},
	{
		"device": "GPU1",
		"device_id": 1,
		"hash_rate": 2055045,
		"hash_rate_avg": 2037669,
		"gpu_temperature": 55,
		"gpu_fan_rpm": 4513
	},
	{
		"device": "GPU2",
		"device_id": 2,
		"hash_rate": 2035978,
		"hash_rate_avg": 2039365,
		"gpu_temperature": 56,
		"gpu_fan_rpm": 4522
	}

[/quote]

You mean the Frequency (%) -30 and Frequency (MHz) 1100 right?

Kaezar

newbie

Activity: 73

Merit: 0

Quote

Try change page file to disable, reboot, set new settings around 64000 and reboot. Try start all 4 cards.
and... 2389.8 H/s GPU0 - its not possible on vega.. 2050+- max.. hmm...
You play with overclocking settings, registry edit, etc.. ?
What OS? Clean win 10 x64 ?

Yes finally this Try change page file to disable, reboot, set new settings around 64000 and reboot. Try start all 4 cards. did the trick!.
Thank you very much.

Code:

[Pool: 'pool.supportxmr.com:7777' | Connected: 2017-11-29 18:45:54]
  0:01:02 (100%) Online
  0:00:00 (  0%) Offline

[Job: #2 | Difficulty: 53550 | Running: 47.0 sec | Avg Job Time: 14.0 sec]

[Hash Rate Avg: 7750.7 H/s]
  1910.6 H/s GPU0
  1955.5 H/s GPU1
  1937.9 H/s GPU2
  1946.7 H/s GPU3

[Shares Found: 9 | Avg Search Time: 7.0 sec]
   8 ( 89%) Accepted
   0 (  0%) Rejected by pool
   0 (  0%) Invalid result computation failed
   0 (  0%) Could not be submit because of network error
   1 ( 11%) Outdated because of job change

[/quote]
Now turn HBCC off, set in Wattman GPU -10(30) and memory to 1100-1105. and you will get around 2000+h/s

Code:

"devices": [
	{
		"device": "GPU0",
		"device_id": 0,
		"hash_rate": 2045662,
		"hash_rate_avg": 2034352,
		"gpu_temperature": 55,
		"gpu_fan_rpm": 4522
	},
	{
		"device": "GPU1",
		"device_id": 1,
		"hash_rate": 2055045,
		"hash_rate_avg": 2037669,
		"gpu_temperature": 55,
		"gpu_fan_rpm": 4513
	},
	{
		"device": "GPU2",
		"device_id": 2,
		"hash_rate": 2035978,
		"hash_rate_avg": 2039365,
		"gpu_temperature": 56,
		"gpu_fan_rpm": 4522
	}

oxzhor

newbie

Activity: 46

Merit: 0

Quote from: Kaezar on November 29, 2017, 12:17:19 PM

Quote from: oxzhor on November 29, 2017, 11:58:23 AM

Quote from: Kaezar on November 29, 2017, 11:48:28 AM

Quote from: oxzhor on November 29, 2017, 11:20:39 AM

Quote from: Kaezar on November 29, 2017, 10:31:54 AM

Quote from: oxzhor on November 29, 2017, 09:56:50 AM

Ok it starts but spamming the error

[Pool: 'pool.supportxmr.com:7777' | Connected: 2017-11-29 15:07:59]
  0:00:16 (100%) Online
  0:00:00 ( 0%) Offline

[Job: #1 | Difficulty: 25000 | Running: 16.0 sec]

[Hash Rate Avg: 8534.6 H/s]
  2389.8 H/s GPU0
  1351.8 H/s GPU1
  2395.6 H/s GPU2
  2397.5 H/s GPU3

[Shares Found: 4 | Avg Search Time: 4.0 sec]
   4 (100%) Accepted
   0 ( 0%) Rejected by pool
   0 ( 0%) Invalid result computation failed
   0 ( 0%) Could not be submit because of network error
   0 ( 0%) Outdated because of job change

[15:08:17] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.
[15:08:17] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.

hmm.. may be try "run as Administrator" ? just for test.

The run.bat not open if i right click and open as admin, it pops op and close.

yeah, you need run "cmd" from admin, and from "cmd" start run.bat.

Ok i get the same error ?

Try change page file to disable, reboot, set new settings around 64000 and reboot. Try start all 4 cards.
and... 2389.8 H/s GPU0 - its not possible on vega.. 2050+- max.. hmm...
You play with overclocking settings, registry edit, etc.. ?
What OS? Clean win 10 x64 ?

Yes finally this Try change page file to disable, reboot, set new settings around 64000 and reboot. Try start all 4 cards. did the trick!.
Thank you very much.

Code:

[Pool: 'pool.supportxmr.com:7777' | Connected: 2017-11-29 18:45:54]
  0:01:02 (100%) Online
  0:00:00 (  0%) Offline

[Job: #2 | Difficulty: 53550 | Running: 47.0 sec | Avg Job Time: 14.0 sec]

[Hash Rate Avg: 7750.7 H/s]
  1910.6 H/s GPU0
  1955.5 H/s GPU1
  1937.9 H/s GPU2
  1946.7 H/s GPU3

[Shares Found: 9 | Avg Search Time: 7.0 sec]
   8 ( 89%) Accepted
   0 (  0%) Rejected by pool
   0 (  0%) Invalid result computation failed
   0 (  0%) Could not be submit because of network error
   1 ( 11%) Outdated because of job change

theailer

newbie

Activity: 1

Merit: 0

https://imgur.com/a/eaBOi

My overdriveNT settings and a nice 1.96Khash/s with vega 64.

Kaezar

newbie

Activity: 73

Merit: 0

Quote from: oxzhor on November 29, 2017, 11:58:23 AM

Quote from: Kaezar on November 29, 2017, 11:48:28 AM

Quote from: oxzhor on November 29, 2017, 11:20:39 AM

Quote from: Kaezar on November 29, 2017, 10:31:54 AM

Quote from: oxzhor on November 29, 2017, 09:56:50 AM

Ok it starts but spamming the error

[Pool: 'pool.supportxmr.com:7777' | Connected: 2017-11-29 15:07:59]
  0:00:16 (100%) Online
  0:00:00 ( 0%) Offline

[Job: #1 | Difficulty: 25000 | Running: 16.0 sec]

[Hash Rate Avg: 8534.6 H/s]
  2389.8 H/s GPU0
  1351.8 H/s GPU1
  2395.6 H/s GPU2
  2397.5 H/s GPU3

[Shares Found: 4 | Avg Search Time: 4.0 sec]
   4 (100%) Accepted
   0 ( 0%) Rejected by pool
   0 ( 0%) Invalid result computation failed
   0 ( 0%) Could not be submit because of network error
   0 ( 0%) Outdated because of job change

[15:08:17] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.
[15:08:17] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.

hmm.. may be try "run as Administrator" ? just for test.

The run.bat not open if i right click and open as admin, it pops op and close.

yeah, you need run "cmd" from admin, and from "cmd" start run.bat.

Ok i get the same error ?

Try change page file to disable, reboot, set new settings around 64000 and reboot. Try start all 4 cards.
and... 2389.8 H/s GPU0 - its not possible on vega.. 2050+- max.. hmm...
You play with overclocking settings, registry edit, etc.. ?
What OS? Clean win 10 x64 ?

oxzhor

newbie

Activity: 46

Merit: 0

Quote from: Kaezar on November 29, 2017, 11:48:28 AM

Quote from: oxzhor on November 29, 2017, 11:20:39 AM

Quote from: Kaezar on November 29, 2017, 10:31:54 AM

Quote from: oxzhor on November 29, 2017, 09:56:50 AM

Ok it starts but spamming the error

[Pool: 'pool.supportxmr.com:7777' | Connected: 2017-11-29 15:07:59]
  0:00:16 (100%) Online
  0:00:00 ( 0%) Offline

[Job: #1 | Difficulty: 25000 | Running: 16.0 sec]

[Hash Rate Avg: 8534.6 H/s]
  2389.8 H/s GPU0
  1351.8 H/s GPU1
  2395.6 H/s GPU2
  2397.5 H/s GPU3

[Shares Found: 4 | Avg Search Time: 4.0 sec]
   4 (100%) Accepted
   0 ( 0%) Rejected by pool
   0 ( 0%) Invalid result computation failed
   0 ( 0%) Could not be submit because of network error
   0 ( 0%) Outdated because of job change

[15:08:17] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.
[15:08:17] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.

hmm.. may be try "run as Administrator" ? just for test.

The run.bat not open if i right click and open as admin, it pops op and close.

yeah, you need run "cmd" from admin, and from "cmd" start run.bat.

Ok i get the same error ?

Kaezar

newbie

Activity: 73

Merit: 0

Quote from: oxzhor on November 29, 2017, 11:20:39 AM

Quote from: Kaezar on November 29, 2017, 10:31:54 AM

Quote from: oxzhor on November 29, 2017, 09:56:50 AM

Ok it starts but spamming the error

[Pool: 'pool.supportxmr.com:7777' | Connected: 2017-11-29 15:07:59]
  0:00:16 (100%) Online
  0:00:00 ( 0%) Offline

[Job: #1 | Difficulty: 25000 | Running: 16.0 sec]

[Hash Rate Avg: 8534.6 H/s]
  2389.8 H/s GPU0
  1351.8 H/s GPU1
  2395.6 H/s GPU2
  2397.5 H/s GPU3

[Shares Found: 4 | Avg Search Time: 4.0 sec]
   4 (100%) Accepted
   0 ( 0%) Rejected by pool
   0 ( 0%) Invalid result computation failed
   0 ( 0%) Could not be submit because of network error
   0 ( 0%) Outdated because of job change

[15:08:17] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.
[15:08:17] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.

hmm.. may be try "run as Administrator" ? just for test.

The run.bat not open if i right click and open as admin, it pops op and close.

yeah, you need run "cmd" from admin, and from "cmd" start run.bat.

oxzhor

newbie

Activity: 46

Merit: 0

Quote from: Kaezar on November 29, 2017, 10:31:54 AM

Quote from: oxzhor on November 29, 2017, 09:56:50 AM

Ok it starts but spamming the error

[Pool: 'pool.supportxmr.com:7777' | Connected: 2017-11-29 15:07:59]
  0:00:16 (100%) Online
  0:00:00 ( 0%) Offline

[Job: #1 | Difficulty: 25000 | Running: 16.0 sec]

[Hash Rate Avg: 8534.6 H/s]
  2389.8 H/s GPU0
  1351.8 H/s GPU1
  2395.6 H/s GPU2
  2397.5 H/s GPU3

[Shares Found: 4 | Avg Search Time: 4.0 sec]
   4 (100%) Accepted
   0 ( 0%) Rejected by pool
   0 ( 0%) Invalid result computation failed
   0 ( 0%) Could not be submit because of network error
   0 ( 0%) Outdated because of job change

[15:08:17] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.
[15:08:17] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.

hmm.. may be try "run as Administrator" ? just for test.

The run.bat not open if i right click and open as admin, it pops op and close.

Kaezar

newbie

Activity: 73

Merit: 0

Quote from: oxzhor on November 29, 2017, 09:56:50 AM

Ok it starts but spamming the error

[Pool: 'pool.supportxmr.com:7777' | Connected: 2017-11-29 15:07:59]
0:00:16 (100%) Online
0:00:00 ( 0%) Offline

[Job: #1 | Difficulty: 25000 | Running: 16.0 sec]

[Hash Rate Avg: 8534.6 H/s]
2389.8 H/s GPU0
1351.8 H/s GPU1
2395.6 H/s GPU2
2397.5 H/s GPU3

[Shares Found: 4 | Avg Search Time: 4.0 sec]
4 (100%) Accepted
0 ( 0%) Rejected by pool
0 ( 0%) Invalid result computation failed
0 ( 0%) Could not be submit because of network error
0 ( 0%) Outdated because of job change

[15:08:17] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.
[15:08:17] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.

hmm.. may be try "run as Administrator" ? just for test.

oxzhor

newbie

Activity: 46

Merit: 0

Ok it starts but spamming the error

[Pool: 'pool.supportxmr.com:7777' | Connected: 2017-11-29 15:07:59]
0:00:16 (100%) Online
0:00:00 ( 0%) Offline

[Job: #1 | Difficulty: 25000 | Running: 16.0 sec]

[Hash Rate Avg: 8534.6 H/s]
2389.8 H/s GPU0
1351.8 H/s GPU1
2395.6 H/s GPU2
2397.5 H/s GPU3

[Shares Found: 4 | Avg Search Time: 4.0 sec]
4 (100%) Accepted
0 ( 0%) Rejected by pool
0 ( 0%) Invalid result computation failed
0 ( 0%) Could not be submit because of network error
0 ( 0%) Outdated because of job change

[15:08:17] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.
[15:08:17] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.

oxzhor

newbie

Activity: 46

Merit: 0

virtual memory is set on 70000 min and max 80000.

Oke test all cards separately

Code:

cast_xmr-vega --opencl 1 -G 0

Test successful working

Code:

cast_xmr-vega --opencl 1 -G 1

Test successful working

Code:

cast_xmr-vega --opencl 1 -G 2

Test successful working

Code:

cast_xmr-vega --opencl 1 -G 3

Test successful working

4 not exist so i think Cast XMR will not count the internal GPU.

Code:

cast_xmr-vega --opencl 1 -G 0,1,2,3

Test FAIL
Error message:

Code:

Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.

Njeroe

newbie

Activity: 48

Merit: 0

Quote from: Kaezar on November 29, 2017, 09:21:34 AM

Quote from: oxzhor on November 29, 2017, 09:15:35 AM

Quote from: Kaezar on November 29, 2017, 09:09:31 AM

Quote

Just try with one card:

Code:

  cast_xmr-vega --opencl 1 -G 0 -S pool.supportxmr.com:7777 -u 47BPxtKATViEjCy4TMTDHbAq6QqjFRMgsXhe2PmqfNKE41QBa2AhxgHP19huMV7et4X2YiAhVbgUgAoCAtDbmeuW1tcrgXN.miner1

or

Code:

  cast_xmr-vega --opencl 0 -G 0 -S pool.supportxmr.com:7777 -u 47BPxtKATViEjCy4TMTDHbAq6QqjFRMgsXhe2PmqfNKE41QBa2AhxgHP19huMV7et4X2YiAhVbgUgAoCAtDbmeuW1tcrgXN.miner1

Ok 1 start without any error, with cast_xmr-vega --opencl 1 -G 0,1 it also start without error but when i added cast_xmr-vega --opencl 1 -G 0,1,2 i get

Code:

Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.

Ok. Check device manager. You see all 3 cards without any problems with 22.19.659.0 drivers version?

Yes all four Vega 56 have driver version 22.19.659.0

Okaj... very interesting...
4 vega?
ok. just test all cards separatly.. with 0 and 1 we have no problems? start with 2..

Code:

cast_xmr-vega --opencl 1 -G 2

cast_xmr-vega --opencl 1 -G 3

Errors?

also did you increase the amount of virtual memory?

Kaezar

newbie

Activity: 73

Merit: 0

Quote from: oxzhor on November 29, 2017, 09:15:35 AM

Quote from: Kaezar on November 29, 2017, 09:09:31 AM

Quote

Just try with one card:

Code:

  cast_xmr-vega --opencl 1 -G 0 -S pool.supportxmr.com:7777 -u 47BPxtKATViEjCy4TMTDHbAq6QqjFRMgsXhe2PmqfNKE41QBa2AhxgHP19huMV7et4X2YiAhVbgUgAoCAtDbmeuW1tcrgXN.miner1

or

Code:

  cast_xmr-vega --opencl 0 -G 0 -S pool.supportxmr.com:7777 -u 47BPxtKATViEjCy4TMTDHbAq6QqjFRMgsXhe2PmqfNKE41QBa2AhxgHP19huMV7et4X2YiAhVbgUgAoCAtDbmeuW1tcrgXN.miner1

Ok 1 start without any error, with cast_xmr-vega --opencl 1 -G 0,1 it also start without error but when i added cast_xmr-vega --opencl 1 -G 0,1,2 i get

Code:

Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.

Ok. Check device manager. You see all 3 cards without any problems with 22.19.659.0 drivers version?

Yes all four Vega 56 have driver version 22.19.659.0

Okaj... very interesting...
4 vega?
ok. just test all cards separatly.. with 0 and 1 we have no problems? start with 2..

Code:

cast_xmr-vega --opencl 1 -G 2

cast_xmr-vega --opencl 1 -G 3

Errors?

oxzhor

newbie

Activity: 46

Merit: 0

Quote from: Kaezar on November 29, 2017, 09:09:31 AM

Quote

Just try with one card:

Code:

  cast_xmr-vega --opencl 1 -G 0 -S pool.supportxmr.com:7777 -u 47BPxtKATViEjCy4TMTDHbAq6QqjFRMgsXhe2PmqfNKE41QBa2AhxgHP19huMV7et4X2YiAhVbgUgAoCAtDbmeuW1tcrgXN.miner1

or

Code:

  cast_xmr-vega --opencl 0 -G 0 -S pool.supportxmr.com:7777 -u 47BPxtKATViEjCy4TMTDHbAq6QqjFRMgsXhe2PmqfNKE41QBa2AhxgHP19huMV7et4X2YiAhVbgUgAoCAtDbmeuW1tcrgXN.miner1

Ok 1 start without any error, with cast_xmr-vega --opencl 1 -G 0,1 it also start without error but when i added cast_xmr-vega --opencl 1 -G 0,1,2 i get

Code:

Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.

Ok. Check device manager. You see all 3 cards without any problems with 22.19.659.0 drivers version?

Yes all four Vega 56 have driver version 22.19.659.0

https://www.mupload.nl/img/lvcd7jlrzptjv.png

Kaezar

newbie

Activity: 73

Merit: 0

Quote

Just try with one card:

Code:

  cast_xmr-vega --opencl 1 -G 0 -S pool.supportxmr.com:7777 -u 47BPxtKATViEjCy4TMTDHbAq6QqjFRMgsXhe2PmqfNKE41QBa2AhxgHP19huMV7et4X2YiAhVbgUgAoCAtDbmeuW1tcrgXN.miner1

or

Code:

  cast_xmr-vega --opencl 0 -G 0 -S pool.supportxmr.com:7777 -u 47BPxtKATViEjCy4TMTDHbAq6QqjFRMgsXhe2PmqfNKE41QBa2AhxgHP19huMV7et4X2YiAhVbgUgAoCAtDbmeuW1tcrgXN.miner1

Ok 1 start without any error, with cast_xmr-vega --opencl 1 -G 0,1 it also start without error but when i added cast_xmr-vega --opencl 1 -G 0,1,2 i get

Code:

Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.

Ok. Check device manager. You see all 3 cards without any problems with 22.19.659.0 drivers version?

oxzhor

newbie

Activity: 46

Merit: 0

Quote from: Kaezar on November 29, 2017, 08:56:33 AM

Quote from: oxzhor on November 29, 2017, 08:42:14 AM

Quote from: MATHReX on November 29, 2017, 08:33:57 AM

Quote from: oxzhor on November 29, 2017, 08:27:42 AM

Still the same error Huh

Add this to the bat file:

Code:

--opencl 1 -G 0,1,2,..,N

for a N+1 number of Vega GPUs.

Ok it starts with cast_xmr-vega --opencl 1 -G 0,1,2,3,N -S

Now i get the follow error

Code:

[13:51:27] Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.

Just try with one card:

Code:

  cast_xmr-vega --opencl 1 -G 0 -S pool.supportxmr.com:7777 -u 47BPxtKATViEjCy4TMTDHbAq6QqjFRMgsXhe2PmqfNKE41QBa2AhxgHP19huMV7et4X2YiAhVbgUgAoCAtDbmeuW1tcrgXN.miner1

or

Code:

  cast_xmr-vega --opencl 0 -G 0 -S pool.supportxmr.com:7777 -u 47BPxtKATViEjCy4TMTDHbAq6QqjFRMgsXhe2PmqfNKE41QBa2AhxgHP19huMV7et4X2YiAhVbgUgAoCAtDbmeuW1tcrgXN.miner1

Ok 1 start without any error, with cast_xmr-vega --opencl 1 -G 0,1 it also start without error but when i added cast_xmr-vega --opencl 1 -G 0,1,2 i get

Code:

Error CL_MEM_OBJECT_ALLOCATION_FAILURE calling clEnqueueNDRangeKernel for kernel 0.

Topic: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) - page 120. (Read 206388 times)