Author

Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 1088. (Read 2347601 times)

hero member
Activity: 840
Merit: 1000
Hi guys here are my results for various algo. I used simple config w/o any switches for all algos except scrypt ones & cryptonight algo. I used ccminer release49, cudaminer 2014-02-28, & ccminer-tsiv-20140926.

I was also running cryptonight on 2 CPU cores & atleast 10 POS coins were staking Tongue. So take these results with a grain of salt. My machine is i5 4670, 8GB RAM, Win7 64-bit, MSI GTX970 & GTX750ti. I measured power consumption using APC Powerchute s/w for the cards only not whole machine. I basically noted the difference in power consumption while machine was idle & while mining. There was very little fluctuation so figures are pretty accurate.

Sample config: ccminer.exe -d gtx750ti -q -s 1 -a ALGO -o POOLURL:PORT -O USER:PASS [scrypt/cryptonight switches]

Code:
==========================================================================================================================
Algo KHash 970 KHash 750ti Total KHash Power 970 Power 750ti Total Power Pool Used
===========================================================================================================================
Quark 13300.00 5150.00 18450.00 164 W 43 W 207 W NiceHash
Neoscrypt 475.00 162.00 637.00 155 W 50 W 205 W NiceHash
NIST5 22100.00 8520.00 30620.00 155 W 50 W 205 W NiceHash
X11 7450.00 2810.00 10260.00 164 W 43 W 207 W NiceHash
X13 5940.00 2225.00 8165.00 164 W 45 W 209 W NiceHash
X15 5150.00 1950.00 7100.00 160 W 43 W 203 W NiceHash
Lyra2RE 1098.00 701.00 1799.00 112 W 34 W 146 W NiceHash
Skein 268000.00 86000.00 354000.00 164 W 40 W 204 W Digibyte NOMP
Qubit 11450.00 4475.00 15925.00 160 W 40 W 200 W NiceHash
Keccak 430000.00 157500.00 587500.00 155 W 43 W 198 W NiceHash
WhirlPoolX Vanillacoin is Pure POS for a month so cant test
CryptoNight 0.36 0.20 0.56 104 W 26 W 130 W Minergate
Scrypt NF15 2.77 0.98 3.75 164 W 52 W 216 W UTC TumblingBlock
Scrypt NF16 0.78 0.35 1.13 130 W 44 W 174 W UTC TumblingBlock
Groestl 20500.00 7420.00 27920.00 172 W 64 W 236 W GRS Dwarfpool
Scrypt 507.67 272.07 779.74 173 W 60 W 233 W NiceHash
Scrypt-N 252.00 140.00 392.00 173 W 60 W 233 W NiceHash
I hope you like it Smiley

Regards

Sam Smiley
member
Activity: 67
Merit: 10
I get
Stratum connection failed:....

from Yaamp

and

...retry after 30 seconds

from west/nice hash

legendary
Activity: 2912
Merit: 1091
--- ChainWorks Industries ---
btw ...

it seems that not only has yaamp dropped most of the connections and is being quite temperamental with new connections ( and dropping out altogether ) - but wetshash / nicehash seem to continuously drop ALL the donation link connections and refuse to reconnect ...

we have contacted the support people at nicehash / westhash - so will wait to see what it may be thats causing this issue ...

hopefully we will have the donation links up and running once again ...

is anyone getting the same or similar issues? ...

#crysx

yaamp down nearly 24 hrs now. nicehash stratums dropped for a about 15 minutes around 6 hrs ago.

Could it be a coordinated DDOS attack targetting both pools? nice/west activated their annoying DDOS
tool yesterday that delays a page refresh while it "verifies your browser". They ran it once before and I thought
they had given up on it, but it's back. Seems to be off now.

it could be a ddos attack - or it could just be that possibly any of the things that they may be doing in the back end of the system could be causing issues ...

i think they are using cloudflare - which really does look like a pretty good system for the protection of websites and ddos style attacks ...

not sure how it will fare for a mining portal like yaamp and westhash / nicehash ...

its all just guesses for the moment - so who knows ...

even coinking.io is down as well - so its a pretty mysterious ( if not slightly coincidental ) situation thats going on ...

are they all on the same servers? ... it could be that the whole datacenter they are on has issues ... will have to look into that a little later ...

eitherway - its still all 'if' and 'maybe' for now till we hear from them all ...

#crysx
legendary
Activity: 1470
Merit: 1114
btw ...

it seems that not only has yaamp dropped most of the connections and is being quite temperamental with new connections ( and dropping out altogether ) - but wetshash / nicehash seem to continuously drop ALL the donation link connections and refuse to reconnect ...

we have contacted the support people at nicehash / westhash - so will wait to see what it may be thats causing this issue ...

hopefully we will have the donation links up and running once again ...

is anyone getting the same or similar issues? ...

#crysx

yaamp down nearly 24 hrs now. nicehash stratums dropped for a about 15 minutes around 6 hrs ago.

Could it be a coordinated DDOS attack targetting both pools? nice/west activated their annoying DDOS
tool yesterday that delays a page refresh while it "verifies your browser". They ran it once before and I thought
they had given up on it, but it's back. Seems to be off now.
hero member
Activity: 677
Merit: 500
west and nice now is ok!
legendary
Activity: 2912
Merit: 1091
--- ChainWorks Industries ---
btw ...

it seems that not only has yaamp dropped most of the connections and is being quite temperamental with new connections ( and dropping out altogether ) - but wetshash / nicehash seem to continuously drop ALL the donation link connections and refuse to reconnect ...

we have contacted the support people at nicehash / westhash - so will wait to see what it may be thats causing this issue ...

hopefully we will have the donation links up and running once again ...

is anyone getting the same or similar issues? ...

#crysx
legendary
Activity: 2912
Merit: 1091
--- ChainWorks Industries ---
my eltectro is cost 0.05 USD... but i pay 1/3 of this price Smiley

WOW ... if only we had such cheap electricity ...

#crysx
hero member
Activity: 677
Merit: 500
my eltectro is cost 0.05 USD... but i pay 1/3 of this price Smiley
legendary
Activity: 2912
Merit: 1091
--- ChainWorks Industries ---
If by "catching up" you mean "smoking the shit out of in hashrate-per-watt" -  then yeah.

Made my day :-D
Energy is quite expensive where I live (0.144€/kWh) and I still make at least a 3x profit on my cards.
Can't wait for the winter ;-)

same here ...

about 0.30-0.38AUD/KWh ...

the majority of our expense is the electricity cost ... it should never be this high ...

#crysx
full member
Activity: 139
Merit: 100
If by "catching up" you mean "smoking the shit out of in hashrate-per-watt" -  then yeah.

Made my day :-D
Energy is quite expensive where I live (0.144€/kWh) and I still make at least a 3x profit on my cards.
Can't wait for the winter ;-)
hero member
Activity: 644
Merit: 502
looking at long term trends nvida cards which were once no match for amd in mining seem to be catching up, times are changing

If by "catching up" you mean "smoking the shit out of in hashrate-per-watt" -  then yeah.

Where have you been the past 15 months?
sr. member
Activity: 310
Merit: 256
Photon --- The First Child Of Blake Coin --Merged
looking at long term trends nvida cards which were once no match for amd in mining seem to be catching up, times are changing
legendary
Activity: 1470
Merit: 1114
>> I stand corrected. I couldn't get over 900K on a 980
My junior gtx750 can do 890khs lyra with sp_'s #50 heavily oc'ed to 1480/1575 cpu/mem
you're doing something wrong... the 980 should do around 1.5MH/s (at least with my version... not following much what is happening here)
Joblo have you changed the intensity setting for the 980?  The default might be too low for the 980.

I was able to break 1 Mh/s with -i 21.2, any higher would crash. I guess I won't be mining lyra2
with that card.

Your PSU is a good one?

Cooling is adequate?

EDIT: yeah, Quark is best pay right now/lately anyway.

Power & temp are good. I have two monitors plugged to that card, maybe that's it.
member
Activity: 75
Merit: 10
just fyi my results for lyra2 at -i 22.5

[2015-05-16 18:46:33] accepted: 110/119 (92.44%), 2660 khash/s yay!!!
[2015-05-16 18:46:34] GPU #1: GeForce GTX 980, 1331
[2015-05-16 18:46:34] accepted: 111/120 (92.50%), 2660 khash/s yay!!!
[2015-05-16 18:46:39] GPU #0: GeForce GTX 980, 1329
[2015-05-16 18:46:39] accepted: 112/121 (92.56%), 2660 khash/s yay!!!
[2015-05-16 18:46:39] accepted: 113/122 (92.62%), 2660 khash/s yay!!!
[2015-05-16 18:46:39] GPU #1: GeForce GTX 980, 1331
[2015-05-16 18:46:39] accepted: 114/123 (92.68%), 2660 khash/s yay!!!
[2015-05-16 18:46:39] accepted: 115/124 (92.74%), 2660 khash/s yay!!!
[2015-05-16 18:46:44] GPU #0: GeForce GTX 980, 1330
[2015-05-16 18:46:44] accepted: 116/125 (92.80%), 2660 khash/s yay!!!
[2015-05-16 18:46:44] accepted: 117/126 (92.86%), 2660 khash/s yay!!!
[2015-05-16 18:46:49] GPU #1: GeForce GTX 980, 1330
[2015-05-16 18:46:49] accepted: 118/127 (92.91%), 2660 khash/s yay!!!

seems pretty stable once it got over a stumble when I first launched it
legendary
Activity: 1470
Merit: 1114
anyone use this with a GTX 770?  What kind of speeds/algos?  thx

SP's optimizations and default builds are for compute 5.0 (gtx750 & newer) so you would first
have to compile ccminer yourself for compute version 3.0 and it probably wouldn't benefit from the
optimizations. If you're not comfortable compiling, or more spefically, changing the
compute version, there have been some discussions about it earlier in this thread. If you get
stuck I'm sure someone here will help you.
legendary
Activity: 2296
Merit: 1031
anyone use this with a GTX 770?  What kind of speeds/algos?  thx
hero member
Activity: 644
Merit: 502
>> I stand corrected. I couldn't get over 900K on a 980
My junior gtx750 can do 890khs lyra with sp_'s #50 heavily oc'ed to 1480/1575 cpu/mem
you're doing something wrong... the 980 should do around 1.5MH/s (at least with my version... not following much what is happening here)
Joblo have you changed the intensity setting for the 980?  The default might be too low for the 980.

I was able to break 1 Mh/s with -i 21.2, any higher would crash. I guess I won't be mining lyra2
with that card.

Your PSU is a good one?

Cooling is adequate?

EDIT: yeah, Quark is best pay right now/lately anyway.
legendary
Activity: 1470
Merit: 1114
>> I stand corrected. I couldn't get over 900K on a 980
My junior gtx750 can do 890khs lyra with sp_'s #50 heavily oc'ed to 1480/1575 cpu/mem
you're doing something wrong... the 980 should do around 1.5MH/s (at least with my version... not following much what is happening here)
Joblo have you changed the intensity setting for the 980?  The default might be too low for the 980.

I was able to break 1 Mh/s with -i 21.2, any higher would crash. I guess I won't be mining lyra2
with that card.
that's actually why I think letting users set the intensity, isn't a good things...  Grin
(not sure why .2 either  Grin 2^0.2 makes me wonder a bit  Grin)

ps: the 980 is really a good card when not using random setting  Grin

Yes mine works much better with x11, quark, etc, even with random default settings.
legendary
Activity: 1400
Merit: 1050
>> I stand corrected. I couldn't get over 900K on a 980
My junior gtx750 can do 890khs lyra with sp_'s #50 heavily oc'ed to 1480/1575 cpu/mem
you're doing something wrong... the 980 should do around 1.5MH/s (at least with my version... not following much what is happening here)
Joblo have you changed the intensity setting for the 980?  The default might be too low for the 980.

I was able to break 1 Mh/s with -i 21.2, any higher would crash. I guess I won't be mining lyra2
with that card.
that's actually why I think letting users set the intensity, isn't a good things...  Grin
(not sure why .2 either  Grin 2^0.2 makes me wonder a bit  Grin)

ps: the 980 is really a good card when not using random setting  Grin
legendary
Activity: 1470
Merit: 1114
>> I stand corrected. I couldn't get over 900K on a 980
My junior gtx750 can do 890khs lyra with sp_'s #50 heavily oc'ed to 1480/1575 cpu/mem
you're doing something wrong... the 980 should do around 1.5MH/s (at least with my version... not following much what is happening here)
Joblo have you changed the intensity setting for the 980?  The default might be too low for the 980.

I was able to break 1 Mh/s with -i 21.2, any higher would crash. I guess I won't be mining lyra2
with that card.
Jump to: