Ethereum isn't going PoS until next year september.
But the reward will decrease rapidly. The hardfork is comming in september, and it contains code that will put the last nail in the coffin for the Ethereum miners.
Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 192. (Read 2347601 times)
But the reward will decrease rapidly. The hardfork is comming in september, and it contains code that will put the last nail in the coffin for the Ethereum miners.
Ethereum isn't going PoS until next year september. There is an entire year of good earnings from that coin (putting aside other Dagger coins) up until that point and it's a slow buildup (or wind down). It's nothing to worry about for awhile and they keep pushing it back. It was supposed to happen last year in the fall (2016) and didn't. I've covered this multiple times over the years.
Yes a Xevan miner would be good.
RIE needs a GPU miner as well.
Prime channel for NXS needs a GPU miner (there is a private one floating around somewhere and one person is eating all the blocks).
Yes a Xevan miner would be good.
RIE needs a GPU miner as well.
Prime channel for NXS needs a GPU miner (there is a private one floating around somewhere and one person is eating all the blocks).
Yes they will move to monero and zcash, so you investment of 0.1BTC in the monero sp-mod is a good choice for the future.
that's sounds pathetic You only forgot to add, that miners who mine ETH now, will move to other coins, and every other profitable coin will also lower income
Yes they will move to monero and zcash, so you investment of 0.1BTC in the monero sp-mod is a good choice for the future.
You only forgot to add, that miners who mine ETH now, will move to other coins, and every other profitable coin will also lower income
Wha? Metropolis hard fork yes but POS definitely not. Early 2018 if you're being optimistic.
But the emission will be less and less. If the price doesn't continue to grow, mining will not be profitable.
here is a proper calculator with "frontier style diff" (ethereum)
24mhash give $1 a day and in 6 months $0.20 a day (if the price of ethereum stays at the same level, and the number of miners is the same)
Each time the ethereum hardfork, the calculators needs to be updated. Coinwarz is using the old calculator with 15 sec blocktime.
Even if you see a profit of $1.20 you usually end up with around $1. (20% less)
Even if you see a profit of $1.20 you usually end up with around $1. (20% less)
Ethereum will hardfork in september and go POS.
Wha? Metropolis hard fork yes but POS definitely not. Early 2018 if you're being optimistic.
I've set 600H/s for Cryptonight on https://www.coinwarz.com myself, and it shows profit only 1.35$ per day. And for ETH for 24 MH/s it shows 1.28$ per day/. Still 7 cents difference. In your calculation the only number is true - you want to get 0.1 BTC, that's all.
And don't forget that current price of monero is much higher in BTC or ETH than median for the week. Or do you guarantee somehow it will stay ?
And don't forget that current price of monero is much higher in BTC or ETH than median for the week. Or do you guarantee somehow it will stay ?
So, only you are using right calculator, right? What if I don't have 100 1060 Samsung cards?
If you have 10 samsung cards, you roi in about 18 days. If coinwars show $1.20 a card for ethereum, you end up with around $1 if you mine.
Coinwarz is using wrong ethereum calculator. If you mine you get 20% less than the calculator.(not precise after homestead release, use doesn't use Frontier-style diff)
Most algos are in the shitter now, but my monero mod is more profitable than the other biggest coins. (Ethereum and zcash)
With my mod you can run the gtx 1060 @ 50% tdp (600h/s @ 60 watt)
So, only you are using right calculator, right? What if I don't have 100 1060 Samsung cards? Most algos are in the shitter now, but my monero mod is more profitable than the other biggest coins. (Ethereum and zcash)
With my mod you can run the gtx 1060 @ 50% tdp (600h/s @ 60 watt)
Coinwarz is using wrong ethereum calculator. If you mine you get 20% less than the calculator.(not precise after homestead release, use doesn't use Frontier-style diff)
Most algos are in the shitter now, but my monero mod is more profitable than the other biggest coins. (Ethereum and zcash)
With my mod you can run the gtx 1060 @ 50% tdp (600h/s @ 60 watt)
Most algos are in the shitter now, but my monero mod is more profitable than the other biggest coins. (Ethereum and zcash)
With my mod you can run the gtx 1060 @ 50% tdp (600h/s @ 60 watt)
With samsung memory you can do 600h/s and that give you $1.43 a day. With 100 samsung cards, you will ROI in 1.8 days. There is almost no difference between the 6GB version and the 3gb. The limit is in the memory bus wich is 192bit for the 1060 series..
Did you calculate ETH rate for Samsung cards? I guess no. And why buying 1060 for Monero? RX580 will give you 900H/s .
With samsung memory you can do 600h/s and that give you $1.43 a day. With 100 samsung cards, you will ROI in 1.8 days. There is almost no difference between the 6GB version and the 3gb. The limit is in the memory bus wich is 192bit for the 1060 series..
Ethereum will hardfork in september and go POS.
Monero is looking strong.
Here is 1060 3g profitability. (monero sp-mod hynix memory. (550h/s))
With samung you get around $1.43 (600h/s)
Cryptonight sp-mod pascal can be yours for a 0.1btc donation. PM for details.
(coinwarz.com)
Monero is looking strong.
Here is 1060 3g profitability. (monero sp-mod hynix memory. (550h/s))
With samung you get around $1.43 (600h/s)
Cryptonight sp-mod pascal can be yours for a 0.1btc donation. PM for details.
(coinwarz.com)
So it is only (3850*0.1)/(1.29-1.21) = 4812 days for a single 1060 3G to get investment back? Impressive
Is the Bitcore spmod worth the $200 if i only have 18 gpu's?
Bitcore is around 20-25% faster, so with only 18 gpu's you get the power of 22-23 gpu's.
Ethereum will hardfork in september and go POS.
Monero is looking strong.
Here is 1060 3g profitability. (monero sp-mod hynix memory. (550h/s))
With samung you get around $1.43 (600h/s)
Cryptonight sp-mod pascal can be yours for a 0.1btc donation. PM for details.
(coinwarz.com)
Monero is looking strong.
Here is 1060 3g profitability. (monero sp-mod hynix memory. (550h/s))
With samung you get around $1.43 (600h/s)
Cryptonight sp-mod pascal can be yours for a 0.1btc donation. PM for details.
(coinwarz.com)
Next on the todo list.
skein sp-mod #2
blake2s sp-mod #2
nexus sp-mod #10
xevan gpu miner. Xevan is x17 1024 bit, so I am rewriting from scratch and base all the 17 kernels on the c implementations.
skein sp-mod #2
blake2s sp-mod #2
nexus sp-mod #10
xevan gpu miner. Xevan is x17 1024 bit, so I am rewriting from scratch and base all the 17 kernels on the c implementations.
What are you estimating for Xevan for a 1060?
Also, for those wondering, below are 3 Xevan coins. Good volumes.
Is the Bitcore spmod worth the $200 if i only have 18 gpu's?
What coin to mine with neoscrypt algo ? Wanan try it on my ti
1080/ti are not good for neoscrypt (at least there are no good miners for them).1080 performs as 1070
1080ti about 30% more. And it is only 60% more than 1060.
1070 can do 1.2MH with alexis miner
Alexis78 v1.0 does not work for me - always get "GPU error", drivers 384.94. ccminer 2.x works fine, but gives me 1 MH/s for 1070 (ASUS STRIX) with TDP 110% and OC settings. (temperature 65-75C).
Had the same error, used alexis78 ccminer from Nemosminer zip file.
Alexis78 is fastest for neoscrpyt only on 1050ti , 1060 and 1070 maybe 1080 as well haven't tested it.. you need to use -i 15 intensity to make it work expect just over 1.15mhs... per 1070... @125watt TDP
Regards
Nemo
Jump to: