Author

Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 564. (Read 2347641 times)

legendary
Activity: 3248
Merit: 1072
That's not a watt meter. Also whats the point of taking a screen shot of only one miner? In order to use that as 'evidence' you'd need to take a screen shot of the same settings mining with Eth+Sia and then one with Lbry and do a side by side.

Most people don't suffer from trying to throw a miner in a case, that's your fault and only applies to you.

Also 'efficiency' applies to everything. If you're trying to throw PSU efficiency in there you probably took a look what I said and are trying to reallllly make what you said work... But you know... 10w more for eth+sia... 8% efficiency... so another .8w for a grand total of 10.8w. Good for you.

that is 100% accurate i've already done the proof with the wattmeter, you don't need a wattmeter anymroe in 2016

i already done the test with eth-sia and it is 150w, the fact that you don't trust me about this, it does not matter

efficiency i know it's apply to everything, it was a way to say what is the actual cosumption of the system, which would be in any case greater with eth-sia, i've already tried it

Saying 'proof' is not proof, nor is saying the date as if measuring with a device between a power source and what's consuming it is antiquated. I'm assuming that's power management software for a stupid expensive PSU. As I mentioned before, use a wattmeter. You could also use a multimeter with a clamp, but that's approximate +/-5% depending on how good your multimeter is.

There is a reason we go on card by card basis, because you can try and 'inflate' numbers by skewing stats. No one cares how much your system consumes besides you. One card applies to me, it applies to you, and it applies to the megafarm that has 400 some 1070s.

It doesn't matter if I trust you or not, it does matter if you're wrong and misinforming others.


This is based off of 24hr average difficulty and profitability for a 1070, the energy use isn't accurate.



wrong and misinformed about what? i posted a screen that is saying clearly that lbry is consuming less this is a proof, other thing are bullshit

you can not consume less than 150w for eth-sia no matter what you do, stop saying crap like that

i'm now making basically the same amount between eth and lbry, 0.03 per day, and in fact your screen do not prove anything, this is mine



once again you only prove how ridiculous are your claims, and i was right when i said that i was making the same before even putting value on whattomine
legendary
Activity: 1134
Merit: 1001
That's not a watt meter. Also whats the point of taking a screen shot of only one miner? In order to use that as 'evidence' you'd need to take a screen shot of the same settings mining with Eth+Sia and then one with Lbry and do a side by side.

Most people don't suffer from trying to throw a miner in a case, that's your fault and only applies to you.

Also 'efficiency' applies to everything. If you're trying to throw PSU efficiency in there you probably took a look what I said and are trying to reallllly make what you said work... But you know... 10w more for eth+sia... 8% efficiency... so another .8w for a grand total of 10.8w. Good for you.

that is 100% accurate i've already done the proof with the wattmeter, you don't need a wattmeter anymroe in 2016

i already done the test with eth-sia and it is 150w, the fact that you don't trust me about this, it does not matter

efficiency i know it's apply to everything, it was a way to say what is the actual cosumption of the system, which would be in any case greater with eth-sia, i've already tried it

Saying 'proof' is not proof, nor is saying the date as if measuring with a device between a power source and what's consuming it is antiquated. I'm assuming that's power management software for a stupid expensive PSU. As I mentioned before, use a wattmeter. You could also use a multimeter with a clamp, but that's approximate +/-5% depending on how good your multimeter is.

There is a reason we go on card by card basis, because you can try and 'inflate' numbers by skewing stats. No one cares how much your system consumes besides you. One card applies to me, it applies to you, and it applies to the megafarm that has 400 some 1070s.

It doesn't matter if I trust you or not, it does matter if you're wrong and misinforming others.


This is based off of 24hr average difficulty and profitability for a 1070, the energy use isn't accurate.



Man...

Ethereum is not good to mine .
legendary
Activity: 1764
Merit: 1024
That's not a watt meter. Also whats the point of taking a screen shot of only one miner? In order to use that as 'evidence' you'd need to take a screen shot of the same settings mining with Eth+Sia and then one with Lbry and do a side by side.

Most people don't suffer from trying to throw a miner in a case, that's your fault and only applies to you.

Also 'efficiency' applies to everything. If you're trying to throw PSU efficiency in there you probably took a look what I said and are trying to reallllly make what you said work... But you know... 10w more for eth+sia... 8% efficiency... so another .8w for a grand total of 10.8w. Good for you.

that is 100% accurate i've already done the proof with the wattmeter, you don't need a wattmeter anymroe in 2016

i already done the test with eth-sia and it is 150w, the fact that you don't trust me about this, it does not matter

efficiency i know it's apply to everything, it was a way to say what is the actual cosumption of the system, which would be in any case greater with eth-sia, i've already tried it

Saying 'proof' is not proof, nor is saying the date as if measuring with a device between a power source and what's consuming it is antiquated. I'm assuming that's power management software for a stupid expensive PSU. As I mentioned before, use a wattmeter. You could also use a multimeter with a clamp, but that's approximate +/-5% depending on how good your multimeter is.

There is a reason we go on card by card basis, because you can try and 'inflate' numbers by skewing stats. No one cares how much your system consumes besides you. One card applies to me, it applies to you, and it applies to the megafarm that has 400 some 1070s.

It doesn't matter if I trust you or not, it does matter if you're wrong and misinforming others.


This is based off of 24hr average difficulty and profitability for a 1070, the energy use isn't accurate.

legendary
Activity: 3248
Merit: 1072
That's not a watt meter. Also whats the point of taking a screen shot of only one miner? In order to use that as 'evidence' you'd need to take a screen shot of the same settings mining with Eth+Sia and then one with Lbry and do a side by side.

Most people don't suffer from trying to throw a miner in a case, that's your fault and only applies to you.

Also 'efficiency' applies to everything. If you're trying to throw PSU efficiency in there you probably took a look what I said and are trying to reallllly make what you said work... But you know... 10w more for eth+sia... 8% efficiency... so another .8w for a grand total of 10.8w. Good for you.

that is 100% accurate i've already done the proof with the wattmeter and it show the same, you don't need a wattmeter anymore in 2016

i already done the test with eth-sia and it is 150w, the fact that you want to trust only what suit your need, speak for itself, yet you did't show any proof of anything, just useless talking

efficiency i know it's apply to everything, it was a way to say what is the actual cosumption of the system, which would be in any case greater with eth-sia, i've already tried it

That's not a watt meter. Also whats the point of taking a screen shot of only one miner? In order to use that as 'evidence' you'd need to take a screen shot of the same settings mining with Eth+Sia and then one with Lbry and do a side by side.

Most people don't suffer from trying to throw a miner in a case, that's your fault and only applies to you.

Also 'efficiency' applies to everything. If you're trying to throw PSU efficiency in there you probably took a look what I said and are trying to reallllly make what you said work... But you know... 10w more for eth+sia... 8% efficiency... so another .8w for a grand total of 10.8w. Good for you.

indeed. Use a real wattmeter, software measurements are worthless.

no you don't know what you are talking about, corsair link is 100% accurate, far from being useless

That's not a watt meter. Also whats the point of taking a screen shot of only one miner? In order to use that as 'evidence' you'd need to take a screen shot of the same settings mining with Eth+Sia and then one with Lbry and do a side by side.

Most people don't suffer from trying to throw a miner in a case, that's your fault and only applies to you.

Also 'efficiency' applies to everything. If you're trying to throw PSU efficiency in there you probably took a look what I said and are trying to reallllly make what you said work... But you know... 10w more for eth+sia... 8% efficiency... so another .8w for a grand total of 10.8w. Good for you.

indeed. Use a real wattmeter, software measurements are worthless.

I confirm that statement , also...

well you are also wrong
sr. member
Activity: 299
Merit: 250
now LBC mining on my MSI GTX 960 2GB with 1.8.2 open-source version
i reached 104 Mh on 70% TDP and (1450 Mhe core& -501 Mem)

Fan speed 18% (auto controlled) LOL only  59c  Cool
legendary
Activity: 1512
Merit: 1000
quarkchain.io
That's not a watt meter. Also whats the point of taking a screen shot of only one miner? In order to use that as 'evidence' you'd need to take a screen shot of the same settings mining with Eth+Sia and then one with Lbry and do a side by side.

Most people don't suffer from trying to throw a miner in a case, that's your fault and only applies to you.

Also 'efficiency' applies to everything. If you're trying to throw PSU efficiency in there you probably took a look what I said and are trying to reallllly make what you said work... But you know... 10w more for eth+sia... 8% efficiency... so another .8w for a grand total of 10.8w. Good for you.

indeed. Use a real wattmeter, software measurements are worthless.

I confirm that statement , also...
sr. member
Activity: 445
Merit: 255
That's not a watt meter. Also whats the point of taking a screen shot of only one miner? In order to use that as 'evidence' you'd need to take a screen shot of the same settings mining with Eth+Sia and then one with Lbry and do a side by side.

Most people don't suffer from trying to throw a miner in a case, that's your fault and only applies to you.

Also 'efficiency' applies to everything. If you're trying to throw PSU efficiency in there you probably took a look what I said and are trying to reallllly make what you said work... But you know... 10w more for eth+sia... 8% efficiency... so another .8w for a grand total of 10.8w. Good for you.

indeed. Use a real wattmeter, software measurements are worthless.
legendary
Activity: 1764
Merit: 1024
That's not a watt meter. Also whats the point of taking a screen shot of only one miner? In order to use that as 'evidence' you'd need to take a screen shot of the same settings mining with Eth+Sia and then one with Lbry and do a side by side.

Most people don't suffer from trying to throw a miner in a case, that's your fault and only applies to you.

Also 'efficiency' applies to everything. If you're trying to throw PSU efficiency in there you probably took a look what I said and are trying to reallllly make what you said work... But you know... 10w more for eth+sia... 8% efficiency... so another .8w for a grand total of 10.8w. Good for you.
legendary
Activity: 3248
Merit: 1072
And then network difficulty increased by 20% and it's earning less then Eth without SIA, let alone ETH+SIA.
Yes...just checked network difficulty .... 150,000...wow   Shocked

i'm still doing better than etheruem alone, better than eth+ sia maybe not, but consumption in that case will rise by 50% so it's not that far away...

You definitely don't have a wattmeter. Even then, you could just look at TDP and it's virtually identical between Eth+Sia and Lbry. Your opinion is woefully uninformed as always.

And no, yesterday Eth earned more then Lbry, let alone Eth+Sia. That you could figure out just by plugging some numbers into Whattomine.

no i have one and while with lbry i'm consuming 120w per card with eth+sia it's around 150w at least



800w power out for the whole system that is the consumption of the system without counting the lost efficiency(8%) of the psu, and i have 3 noctua fan in it so remove at least 60w for the system if not more
legendary
Activity: 1764
Merit: 1024
And then network difficulty increased by 20% and it's earning less then Eth without SIA, let alone ETH+SIA.
Yes...just checked network difficulty .... 150,000...wow   Shocked

i'm still doing better than etheruem alone, better than eth+ sia maybe not, but consumption in that case will rise by 50% so it's not that far away...

You definitely don't have a wattmeter. Even then, you could just look at TDP and it's virtually identical between Eth+Sia and Lbry (about +20%). Considering how little wattage Lbry uses anyway, that's like 10 more watts. It uses less then the original Epsylon miner.Your opinion is woefully uninformed as always.

And no, yesterday Eth earned more then Lbry, let alone Eth+Sia. That you could figure out just by plugging some numbers into Whattomine.
legendary
Activity: 3248
Merit: 1072
And then network difficulty increased by 20% and it's earning less then Eth without SIA, let alone ETH+SIA.
Yes...just checked network difficulty .... 150,000...wow   Shocked

i'm still doing better than etheruem alone, better than eth+ sia maybe not, but consumption in that case will rise by 50% so it's not that far away...
legendary
Activity: 3164
Merit: 1003
And then network difficulty increased by 20% and it's earning less then Eth without SIA, let alone ETH+SIA.
Yes...just checked network difficulty .... 150,000...wow   Shocked
legendary
Activity: 1510
Merit: 1003
Nice, best model for mining ever. Mine are at 50 C degrees right now...
yeah! Now it is running 300mhs@70%tdp - only 124wat in nvidia smi.
47 degrees @ 70%fan
sr. member
Activity: 445
Merit: 255
double kick from the dick heads Wink

I can confirm this, wonderful job.

These dickheads seems to be a lot smart, efficient and frankly... honest.

Support these devs guys, tpruvot really deserve some love (read donations !! Keep em flowing) from the comunity
legendary
Activity: 1512
Merit: 1000
quarkchain.io
Which model is that , rednoW ?
the same as yours - SJS ))

Nice, best model for mining ever. Mine are at 50 C degrees right now...
legendary
Activity: 1510
Merit: 1003
Which model is that , rednoW ?
the same as yours - SJS ))
legendary
Activity: 1512
Merit: 1000
quarkchain.io
double kick from the dick heads Wink
sp_ suxx again with his private ))
New public from our swiss genius rulezz.
It is faster and takes less power.
New lbry record for my poor gtx1070 is 323 325mhs with only 110% tdp. (2200/1400)
Economy mode results a bit later ))

But you should definitely correct this "nonce 6b2f940c was already sent 14 seconds ago" bug in 1.8.x lbry miners ...



Which model is that , rednoW ?
legendary
Activity: 1512
Merit: 1000
quarkchain.io
double kick from the dick heads Wink

That was pretty good , Ive reached 1870 MH with the rig of 6 * 1070 SJS , at 100% PL...
legendary
Activity: 3248
Merit: 1072
double kick from the dick heads Wink
Epsylon3
MSI GTX 960 2gb +200 core -501 Mem

1.8.1 results :



1.8.2


+4 Mh!


not really 4MH for me the last version is 20MH for me with less consumption, i'm consuming only 800w for 6 x 1070 with the whole system including 3 noctua fan

this is 120w per gpu, while hashing at 280-285MH on lbry, pretty crazy
legendary
Activity: 1510
Merit: 1003
Fine!  GTX1070 10% increase hash and 10% reduction in power consumption.
300Mhs/165W on GTX1070 .
I've got some more with less power ))
Jump to: