what pool you guys are using for neoscrypt, they seems all trash tons of orphan or invalid, and solo mining does not work....
Sent you a pm 
Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 693. (Read 2347641 times)
what pool you guys are using for neoscrypt, they seems all trash tons of orphan or invalid, and solo mining does not work....
SP, just a FYI, your version is still not getting as good hash as DJMs Neoscrypt kernel.
Also another FYI, after DJM updated his kernels, it increased power usage by about 15%.
On the 970 I'm getting 700 kh/s. sp 5 private. Also another FYI, after DJM updated his kernels, it increased power usage by about 15%.
= to 3.5 750ti. The best one you have so far sp for ALL algo's.It seems the hashrate of all implementation of Neoscrypt in ccminer (sp, djm, ghostlander) heavily relies on the CPU.
I get 657 kh/s per 970 (4 in total) at around 1460 Mhz on a dualcore pentium g3420.
Same cards, same OC, came settings but with an i3-4130 I get around 90-350 kh/s with a super oscillated GPU usage graph and I have no idea why.
The only version that works properly for me across all rigs is a pretty old sp version (1.5.72).
I hate neoscrypt with all the miner, wallet and orphan issues so much.
problem is this commented line in neoscrypt.cu:
// cudaSetDeviceFlags(cudaDeviceScheduleBlockingSync);
remove the comment and your cpu usage will drop :-)
hashrate will also lower just a little bit.
But I wish sp would leave that to us... cpu affinity 1 ..2 ..3 4 ect
Unless cpu affinity 1 will over ride that? SP, just a FYI, your version is still not getting as good hash as DJMs Neoscrypt kernel.
Also another FYI, after DJM updated his kernels, it increased power usage by about 15%.
On the 970 I'm getting 700 kh/s. sp 5 private. Also another FYI, after DJM updated his kernels, it increased power usage by about 15%.
= to 3.5 750ti. The best one you have so far sp for ALL algo's.It seems the hashrate of all implementation of Neoscrypt in ccminer (sp, djm, ghostlander) heavily relies on the CPU.
I get 657 kh/s per 970 (4 in total) at around 1460 Mhz on a dualcore pentium g3420.
Same cards, same OC, came settings but with an i3-4130 I get around 90-350 kh/s with a super oscillated GPU usage graph and I have no idea why.
The only version that works properly for me across all rigs is a pretty old sp version (1.5.72).
I hate neoscrypt with all the miner, wallet and orphan issues so much.
I think everyone is using MSI AFTERBURNER i'm giving that a try if it will take 5 cards 2x 980ti 2x970 and one 750ti on this rig. I know those gpus are running hot. so msi. 1050 watts at the wall.
Funny cpu you mentioned.
SP, just a FYI, your version is still not getting as good hash as DJMs Neoscrypt kernel.
Also another FYI, after DJM updated his kernels, it increased power usage by about 15%.
On the 970 I'm getting 700 kh/s. sp 5 private. Also another FYI, after DJM updated his kernels, it increased power usage by about 15%.
= to 3.5 750ti. The best one you have so far sp for ALL algo's.It seems the hashrate of all implementation of Neoscrypt in ccminer (sp, djm, ghostlander) heavily relies on the CPU.
I get 657 kh/s per 970 (4 in total) at around 1460 Mhz on a dualcore pentium g3420.
Same cards, same OC, came settings but with an i3-4130 I get around 90-350 kh/s with a super oscillated GPU usage graph and I have no idea why.
The only version that works properly for me across all rigs is a pretty old sp version (1.5.72).
I hate neoscrypt with all the miner, wallet and orphan issues so much.
problem is this commented line in neoscrypt.cu:
// cudaSetDeviceFlags(cudaDeviceScheduleBlockingSync);
remove the comment and your cpu usage will drop :-)
hashrate will also lower just a little bit.
SP, just a FYI, your version is still not getting as good hash as DJMs Neoscrypt kernel.
Also another FYI, after DJM updated his kernels, it increased power usage by about 15%.
On the 970 I'm getting 700 kh/s. sp 5 private. Also another FYI, after DJM updated his kernels, it increased power usage by about 15%.
= to 3.5 750ti. The best one you have so far sp for ALL algo's.It seems the hashrate of all implementation of Neoscrypt in ccminer (sp, djm, ghostlander) heavily relies on the CPU.
I get 657 kh/s per 970 (4 in total) at around 1460 Mhz on a dualcore pentium g3420.
Same cards, same OC, came settings but with an i3-4130 I get around 90-350 kh/s with a super oscillated GPU usage graph and I have no idea why.
The only version that works properly for me across all rigs is a pretty old sp version (1.5.72).
I hate neoscrypt with all the miner, wallet and orphan issues so much.
Sp please in the future make the default intensity settings lower ... I have to do all my bat files over ... that is also why my other rig is crashing. And to put that extra work in is a pain for me will take all day... I'm disabled.. type with a mouse onscreen keyboard. 
sp5
The 4 core computers don't need anything done but the 2 core has to have it done.
970 rig just crashed adjusting intensity ... sp5
The 4 core computers don't need anything done but the 2 core has to have it done.
now does not validate on cpu crash reinstalling different drivers.Trying to keep out with all the crashing while changing intensity and miner control is stealing part of my hash on my small rig and...............
I'm thinking of starting over on the 970 980ti rig and leave it in the p2 state.. to much work to reset clocks that should be in the p0 state to begin with .. nvidia......
leave them to P2: they will draw less power and be more adaptive to temperature fluctuations.
ps i rolled back the drivers to the ones that worked best from January
EDIT: have to do p0 state ni wont allow temp control think i'll get ride of the peice of s#@%
I'm leaving all at default, only setting TDP to control the hashrate/power ratio.
Default fan control by the card bios is working pretty fine on all my cards.
I need to monitor temp and have a fan curve. right now everything is set default even intensity. getting 18 mh/s quark 970 with 10.18.13.6143 driver
N.I. may have been part of the problem too
Sp please in the future make the default intensity settings lower ... I have to do all my bat files over ... that is also why my other rig is crashing. And to put that extra work in is a pain for me will take all day... I'm disabled.. type with a mouse onscreen keyboard.
sp5
The 4 core computers don't need anything done but the 2 core has to have it done.
970 rig just crashed adjusting intensity ... sp5
The 4 core computers don't need anything done but the 2 core has to have it done.
now does not validate on cpu crash reinstalling different drivers.Trying to keep out with all the crashing while changing intensity and miner control is stealing part of my hash on my small rig and...............
I'm thinking of starting over on the 970 980ti rig and leave it in the p2 state.. to much work to reset clocks that should be in the p0 state to begin with .. nvidia......
leave them to P2: they will draw less power and be more adaptive to temperature fluctuations.
ps i rolled back the drivers to the ones that worked best from January
EDIT: have to do p0 state ni wont allow temp control think i'll get ride of the peice of s#@%
I'm leaving all at default, only setting TDP to control the hashrate/power ratio.
Default fan control by the card bios is working pretty fine on all my cards.
intensity settings ..... now does not validate on cpu 970 is 22
-d 0,1,2,3,4 -i 0,0,22,22,0
And why doesn't nvidia inspector remember oc on reboot?
970 is 22-d 0,1,2,3,4 -i 0,0,22,22,0
And why doesn't nvidia inspector remember oc on reboot?
Sp please in the future make the default intensity settings lower ... I have to do all my bat files over ... that is also why my other rig is crashing. And to put that extra work in is a pain for me will take all day... I'm disabled.. type with a mouse onscreen keyboard.
sp5
The 4 core computers don't need anything done but the 2 core has to have it done.
970 rig just crashed adjusting intensity ... sp5
The 4 core computers don't need anything done but the 2 core has to have it done.
now does not validate on cpu crash reinstalling different drivers.Trying to keep out with all the crashing while changing intensity and miner control is stealing part of my hash on my small rig and...............
I'm thinking of starting over on the 970 980ti rig and leave it in the p2 state.. to much work to reset clocks that should be in the p0 state to begin with .. nvidia......
leave them to P2: they will draw less power and be more adaptive to temperature fluctuations.
ps i rolled back the drivers to the ones that worked best from January
EDIT: have to do p0 state ni wont allow temp control think i'll get ride of the peice of s#@%
Sp please in the future make the default intensity settings lower ... I have to do all my bat files over ... that is also why my other rig is crashing. And to put that extra work in is a pain for me will take all day... I'm disabled.. type with a mouse onscreen keyboard.
sp5
The 4 core computers don't need anything done but the 2 core has to have it done.
970 rig just crashed adjusting intensity ... sp5
The 4 core computers don't need anything done but the 2 core has to have it done.
now does not validate on cpu crash reinstalling different drivers.Trying to keep out with all the crashing while changing intensity and miner control is stealing part of my hash on my small rig and...............
I'm thinking of starting over on the 970 980ti rig and leave it in the p2 state.. to much work to reset clocks that should be in the p0 state to begin with .. nvidia......
leave them to P2: they will draw less power and be more adaptive to temperature fluctuations.
Sp please in the future make the default intensity settings lower ... I have to do all my bat files over ... that is also why my other rig is crashing. And to put that extra work in is a pain for me will take all day... I'm disabled.. type with a mouse onscreen keyboard.
sp5
The 4 core computers don't need anything done but the 2 core has to have it done.
970 rig just crashed adjusting intensity ... sp5
The 4 core computers don't need anything done but the 2 core has to have it done.
now does not validate on cpu crash reinstalling different drivers.Trying to keep out with all the crashing while changing intensity and miner control is stealing part of my hash on my small rig and...............
I'm thinking of starting over on the 970 980ti rig and leave it in the p2 state.. to much work to reset clocks that should be in the p0 state to begin with .. nvidia......
Sp please in the future make the default intensity settings lower
Then would he also refund the private buyers?
j/k , I know sp_'s done a lot of work on ccminer and has a lot of proper performance improvements (just not all of them)
Sp please in the future make the default intensity settings lower
Then would he also refund the private buyers?
j/k , I know sp_'s done a lot of work on ccminer and has a lot of proper performance improvements (just not all of them)
Sp please in the future make the default intensity settings lower ... I have to do all my bat files over ... that is also why my other rig is crashing. And to put that extra work in is a pain for me will take all day... I'm disabled.. type with a mouse onscreen keyboard.
sp5
The 4 core computers don't need anything done but the 2 core has to have it done.
sp5
The 4 core computers don't need anything done but the 2 core has to have it done.
SP, just a FYI, your version is still not getting as good hash as DJMs Neoscrypt kernel.
Also another FYI, after DJM updated his kernels, it increased power usage by about 15%.
On the 970 I'm getting 700 kh/s. sp 5 private. Also another FYI, after DJM updated his kernels, it increased power usage by about 15%.
= to 3.5 750ti. The best one you have so far sp for ALL algo's.Hi
have you made some watt-meter measurements at 700KH/s ? What clock speed and batch command line?
Thank you in advance
I'm trying to keep my rigs going ... crashing while I'm adding intensity settings to stop it.
cost too much, you're paying 0.5 for 10% increase, and unless you're sitting a big farm it will take age to roi
0.5? The price is 0.1 for sp-mod #5
i mean all the algo included, he bought that right to have all the 10%? but the problem is that you can't mine all those algo at once, so in the end you're getting 10% only
cost too much, you're paying 0.5 for 10% increase, and unless you're sitting a big farm it will take age to roi
0.5? The price is 0.1 for sp-mod #5
apparently only cgminer 3.7.8 can mine in solo for neoscrypt(but with nvidia it has bad performance), why this? can something be done with ccminer to mine neoscrypt in solo? because no matter what i do it does not work
= to 3.5 750ti. The best one you have so far sp for ALL algo's.
cost too much, you're paying 0.5 for 10% increase, and unless you're sitting a big farm it will take age to roi
SP, just a FYI, your version is still not getting as good hash as DJMs Neoscrypt kernel.
Also another FYI, after DJM updated his kernels, it increased power usage by about 15%.
On the 970 I'm getting 700 kh/s. sp 5 private. Also another FYI, after DJM updated his kernels, it increased power usage by about 15%.
= to 3.5 750ti. The best one you have so far sp for ALL algo's.cost too much, you're paying 0.5 for 10% increase, and unless you're sitting a big farm it will take age to roi
SP, just a FYI, your version is still not getting as good hash as DJMs Neoscrypt kernel.
Also another FYI, after DJM updated his kernels, it increased power usage by about 15%.
My kernal does around 1MHASH on the 980ti. Also another FYI, after DJM updated his kernels, it increased power usage by about 15%.
15% more power is a waste.
1MHASH@1275-1290 core. With max oc it should do 1,2-1,3 MHASH.
Jump to: