CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 697.

joblo

legendary

Activity: 1470

Merit: 1114

Quote from: Genoil on April 17, 2016, 05:32:56 PM

Quote from: joblo on April 17, 2016, 05:22:37 PM

Quote from: Epsylon3 on April 17, 2016, 04:20:00 PM

sigh... its too hard for you to launch 2 miners ?

LOL. I was wondering if one miner could optimize the resource allocation and perfom better
than two competing instances.

It doesn't matter if it's really that much better. It's brilliantly marketed and it sells!

I suppose some users might think it's actualy merge mining.

Genoil

sr. member

Activity: 438

Merit: 250

Quote from: joblo on April 17, 2016, 05:22:37 PM

Quote from: Epsylon3 on April 17, 2016, 04:20:00 PM

sigh... its too hard for you to launch 2 miners ?

LOL. I was wondering if one miner could optimize the resource allocation and perfom better
than two competing instances.

It doesn't matter if it's really that much better. It's brilliantly marketed and it sells!

joblo

legendary

Activity: 1470

Merit: 1114

Quote from: Epsylon3 on April 17, 2016, 04:20:00 PM

sigh... its too hard for you to launch 2 miners ?

LOL. I was wondering if one miner could optimize the resource allocation and perfom better
than two competing instances.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: joblo on April 17, 2016, 12:31:51 PM

Quote from: tbearhere on April 17, 2016, 12:19:24 PM

Quote from: dominuspro on April 17, 2016, 11:14:39 AM

Quote from: tbearhere on April 17, 2016, 09:11:37 AM

Quote from: dominuspro on April 17, 2016, 05:21:27 AM

Quote from: tbearhere on April 17, 2016, 04:28:29 AM

Anybody help please....I was forced to buy 2 970 gtx gigabyte g1 graphics cards...only wanted one. Newegg took my BTC and never gave it back forcing me to buy 2. Never doing business with them again. So I'm having problems with it.
I noticed on my 1st card installed it read out 3505,1455..so I set the clocks to 3505,1455.
When I installed the second card and looked at the clocks available .. it read out that both cards showed 3505,1519. ? ? ? Should I set them to 3505,1455 to get to the p0 state? Or should I just leave them in the p2 state? Thx

Set the P0 state only for mining ETH. For other algos there is no need to.
I usually set the P0 state first and then overclock with the standard procedure.

Thx but what upper clock readout do you are anyone here get on that card.
I do set them to p0 state for everything ... but I may try p2 state. The one card I just got is giving me problems like I said above even at p2.
Anyone have the same clocks?........maybe related to having 2 of the g1 cards I don't know.
Runs for awhile then crashes the drivers at any state they are set at... just curious about the clocks.
Crashed 50 times today.

I don't understand what are You talking about...
So one of Yours 970 G1 works like expected and the other one not? What do You mean both cards showed 3505/1519? Are those the default clocks? Stock 1519 is too high for all 970...
Are You runnning win10?

Windows 8.1 When I had one 970 g1 the clocks were showing 3505,1455.... with 2 cards... both card clocks showed ...default 3505,1519.
Wondering if anyone got the same?
Now I don't know if I should set them back to.. 3505,1455.
They have been running stable now for an hour.

I don't see a problem if the first card runs stable at the higher reported clock rate. It should produce a higher
hash rate and higher power usage, but it's up to you whether to downclock it.

Thx...yes I downclocked it.

Epsylon3

legendary

Activity: 1484

Merit: 1082

ccminer/cpuminer developer

sigh... its too hard for you to launch 2 miners ?

LeChuckDE

sr. member

Activity: 420

Merit: 252

Quote from: Genoil on April 17, 2016, 01:56:01 AM

Quote from: sp_ on April 16, 2016, 12:33:17 PM

Quote from: bensam1231 on April 15, 2016, 11:49:23 PM

And Decred is basically to worthless to mine now after the dual miner hit.
If you guys make a dual miner, please combine it with a different algo... Like Neoscrypt (although more memory hard).

I thought of a dual etherum miner a long time ago, and I also suggested this to Genoil here on bitcointalk. This was before decred came, and I was thinking of a dual Keccak(Maxcoin) + etherum.. You need a simple algo with no memory access to take advantage of the memory pipeline.

True that. I should have listened to you Grin

. Maxcoin would have been great. Perhaps I should try it anyway and see if we can pump it a bit.

Genoil if you need support for it, leave a hint.
I am not a cuda programmer but could attach my knowledge at c++ to support dual mining

joblo

legendary

Activity: 1470

Merit: 1114

Quote from: tbearhere on April 17, 2016, 12:19:24 PM

Quote from: dominuspro on April 17, 2016, 11:14:39 AM

Quote from: tbearhere on April 17, 2016, 09:11:37 AM

Quote from: dominuspro on April 17, 2016, 05:21:27 AM

Quote from: tbearhere on April 17, 2016, 04:28:29 AM

Anybody help please....I was forced to buy 2 970 gtx gigabyte g1 graphics cards...only wanted one. Newegg took my BTC and never gave it back forcing me to buy 2. Never doing business with them again. So I'm having problems with it.
I noticed on my 1st card installed it read out 3505,1455..so I set the clocks to 3505,1455.
When I installed the second card and looked at the clocks available .. it read out that both cards showed 3505,1519. ? ? ? Should I set them to 3505,1455 to get to the p0 state? Or should I just leave them in the p2 state? Thx

Set the P0 state only for mining ETH. For other algos there is no need to.
I usually set the P0 state first and then overclock with the standard procedure.

Thx but what upper clock readout do you are anyone here get on that card.
I do set them to p0 state for everything ... but I may try p2 state. The one card I just got is giving me problems like I said above even at p2.
Anyone have the same clocks?........maybe related to having 2 of the g1 cards I don't know.
Runs for awhile then crashes the drivers at any state they are set at... just curious about the clocks.
Crashed 50 times today.

I don't understand what are You talking about...
So one of Yours 970 G1 works like expected and the other one not? What do You mean both cards showed 3505/1519? Are those the default clocks? Stock 1519 is too high for all 970...
Are You runnning win10?

Windows 8.1 When I had one 970 g1 the clocks were showing 3505,1455.... with 2 cards... both card clocks showed ...default 3505,1519.
Wondering if anyone got the same?
Now I don't know if I should set them back to.. 3505,1455.
They have been running stable now for an hour.

I don't see a problem if the first card runs stable at the higher reported clock rate. It should produce a higher
hash rate and higher power usage, but it's up to you whether to downclock it.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: dominuspro on April 17, 2016, 11:14:39 AM

Quote from: tbearhere on April 17, 2016, 09:11:37 AM

Quote from: dominuspro on April 17, 2016, 05:21:27 AM

Quote from: tbearhere on April 17, 2016, 04:28:29 AM

Anybody help please....I was forced to buy 2 970 gtx gigabyte g1 graphics cards...only wanted one. Newegg took my BTC and never gave it back forcing me to buy 2. Never doing business with them again. So I'm having problems with it.
I noticed on my 1st card installed it read out 3505,1455..so I set the clocks to 3505,1455.
When I installed the second card and looked at the clocks available .. it read out that both cards showed 3505,1519. ? ? ? Should I set them to 3505,1455 to get to the p0 state? Or should I just leave them in the p2 state? Thx

Set the P0 state only for mining ETH. For other algos there is no need to.
I usually set the P0 state first and then overclock with the standard procedure.

Thx but what upper clock readout do you are anyone here get on that card.
I do set them to p0 state for everything ... but I may try p2 state. The one card I just got is giving me problems like I said above even at p2.
Anyone have the same clocks?........maybe related to having 2 of the g1 cards I don't know.
Runs for awhile then crashes the drivers at any state they are set at... just curious about the clocks.
Crashed 50 times today.

I don't understand what are You talking about...
So one of Yours 970 G1 works like expected and the other one not? What do You mean both cards showed 3505/1519? Are those the default clocks? Stock 1519 is too high for all 970...
Are You runnning win10?

Windows 8.1 When I had one 970 g1 the clocks were showing 3505,1455.... with 2 cards... both card clocks showed ...default 3505,1519.
Wondering if anyone got the same?
Now I don't know if I should set them back to.. 3505,1455.
They have been running stable now for an hour.

dominuspro

full member

Activity: 201

Merit: 100

Quote from: tbearhere on April 17, 2016, 09:11:37 AM

Quote from: dominuspro on April 17, 2016, 05:21:27 AM

Quote from: tbearhere on April 17, 2016, 04:28:29 AM

Anybody help please....I was forced to buy 2 970 gtx gigabyte g1 graphics cards...only wanted one. Newegg took my BTC and never gave it back forcing me to buy 2. Never doing business with them again. So I'm having problems with it.
I noticed on my 1st card installed it read out 3505,1455..so I set the clocks to 3505,1455.
When I installed the second card and looked at the clocks available .. it read out that both cards showed 3505,1519. ? ? ? Should I set them to 3505,1455 to get to the p0 state? Or should I just leave them in the p2 state? Thx

Set the P0 state only for mining ETH. For other algos there is no need to.
I usually set the P0 state first and then overclock with the standard procedure.

Thx but what upper clock readout do you are anyone here get on that card.
I do set them to p0 state for everything ... but I may try p2 state. The one card I just got is giving me problems like I said above even at p2.
Anyone have the same clocks?........maybe related to having 2 of the g1 cards I don't know.
Runs for awhile then crashes the drivers at any state they are set at... just curious about the clocks.
Crashed 50 times today.

I don't understand what are You talking about...
So one of Yours 970 G1 works like expected and the other one not? What do You mean both cards showed 3505/1519? Are those the default clocks? Stock 1519 is too high for all 970...
Are You runnning win10?

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: pokeytex on April 17, 2016, 09:40:34 AM

Quote from: tbearhere on April 17, 2016, 09:03:02 AM

Quote from: pokeytex on April 17, 2016, 08:06:08 AM

Quote from: tbearhere on April 17, 2016, 04:28:29 AM

Anybody help please....I was forced to buy 2 970 gtx gigabyte g1 graphics cards...only wanted one. Newegg took my BTC and never gave it back forcing me to buy 2. Never doing business with them again. So I'm having problems with it.
I noticed on my 1st card installed it read out 3505,1455..so I set the clocks to 3505,1455.
When I installed the second card and looked at the clocks available .. it read out that both cards showed 3505,1519. ? ? ? Should I set them to 3505,1455 to get to the p0 state? Or should I just leave them in the p2 state? Thx

@tbearhere - may I ask - how do you pay Newegg with BTC?

Yes you can Wink

When checking out some items you can pay with BTC

Ooooo - I will have to look further into this! You do know that they have a warehouse in Edison, NJ that you can pick up the products from using will call right? Can save on some shipping! Grin

Yes but I can't afford the cost wear and tear on my car and the cost would be ~$100 to go there.
I noticed that my psu is in silent mode and kicking off too..I can't find a fan control that will work.
I have multiple problems .. might have to return the card.
Why don't those cards stay in the p0 state.. fcking nvidia.
Trying 970 drivers instead of 980ti drivers.
Sp sorry for messing up your thread.

pokeytex

legendary

Activity: 1504

Merit: 1002

Quote from: tbearhere on April 17, 2016, 09:03:02 AM

Quote from: pokeytex on April 17, 2016, 08:06:08 AM

Quote from: tbearhere on April 17, 2016, 04:28:29 AM

Anybody help please....I was forced to buy 2 970 gtx gigabyte g1 graphics cards...only wanted one. Newegg took my BTC and never gave it back forcing me to buy 2. Never doing business with them again. So I'm having problems with it.
I noticed on my 1st card installed it read out 3505,1455..so I set the clocks to 3505,1455.
When I installed the second card and looked at the clocks available .. it read out that both cards showed 3505,1519. ? ? ? Should I set them to 3505,1455 to get to the p0 state? Or should I just leave them in the p2 state? Thx

@tbearhere - may I ask - how do you pay Newegg with BTC?

Yes you can Wink

When checking out some items you can pay with BTC

Ooooo - I will have to look further into this! You do know that they have a warehouse in Edison, NJ that you can pick up the products from using will call right? Can save on some shipping! Grin

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: dominuspro on April 17, 2016, 05:21:27 AM

Quote from: tbearhere on April 17, 2016, 04:28:29 AM

Anybody help please....I was forced to buy 2 970 gtx gigabyte g1 graphics cards...only wanted one. Newegg took my BTC and never gave it back forcing me to buy 2. Never doing business with them again. So I'm having problems with it.
I noticed on my 1st card installed it read out 3505,1455..so I set the clocks to 3505,1455.
When I installed the second card and looked at the clocks available .. it read out that both cards showed 3505,1519. ? ? ? Should I set them to 3505,1455 to get to the p0 state? Or should I just leave them in the p2 state? Thx

Set the P0 state only for mining ETH. For other algos there is no need to.
I usually set the P0 state first and then overclock with the standard procedure.

Thx but what upper clock readout do you are anyone here get on that card.
I do set them to p0 state for everything ... but I may try p2 state. The one card I just got is giving me problems like I said above even at p2.
Anyone have the same clocks?........maybe related to having 2 of the g1 cards I don't know.
Runs for awhile then crashes the drivers at any state they are set at... just curious about the clocks.
Crashed 50 times today.

tbearhere

legendary

Activity: 3164

Merit: 1003

Quote from: pokeytex on April 17, 2016, 08:06:08 AM

Quote from: tbearhere on April 17, 2016, 04:28:29 AM

Anybody help please....I was forced to buy 2 970 gtx gigabyte g1 graphics cards...only wanted one. Newegg took my BTC and never gave it back forcing me to buy 2. Never doing business with them again. So I'm having problems with it.
I noticed on my 1st card installed it read out 3505,1455..so I set the clocks to 3505,1455.
When I installed the second card and looked at the clocks available .. it read out that both cards showed 3505,1519. ? ? ? Should I set them to 3505,1455 to get to the p0 state? Or should I just leave them in the p2 state? Thx

@tbearhere - may I ask - how do you pay Newegg with BTC?

Yes you can Wink

When checking out some items you can pay with BTC

pokeytex

legendary

Activity: 1504

Merit: 1002

Quote from: tbearhere on April 17, 2016, 04:28:29 AM

Anybody help please....I was forced to buy 2 970 gtx gigabyte g1 graphics cards...only wanted one. Newegg took my BTC and never gave it back forcing me to buy 2. Never doing business with them again. So I'm having problems with it.
I noticed on my 1st card installed it read out 3505,1455..so I set the clocks to 3505,1455.
When I installed the second card and looked at the clocks available .. it read out that both cards showed 3505,1519. ? ? ? Should I set them to 3505,1455 to get to the p0 state? Or should I just leave them in the p2 state? Thx

@tbearhere - may I ask - how do you pay Newegg with BTC?

dominuspro

full member

Activity: 201

Merit: 100

Quote from: tbearhere on April 17, 2016, 04:28:29 AM

Anybody help please....I was forced to buy 2 970 gtx gigabyte g1 graphics cards...only wanted one. Newegg took my BTC and never gave it back forcing me to buy 2. Never doing business with them again. So I'm having problems with it.
I noticed on my 1st card installed it read out 3505,1455..so I set the clocks to 3505,1455.
When I installed the second card and looked at the clocks available .. it read out that both cards showed 3505,1519. ? ? ? Should I set them to 3505,1455 to get to the p0 state? Or should I just leave them in the p2 state? Thx

Set the P0 state only for mining ETH. For other algos there is no need to.
I usually set the P0 state first and then overclock with the standard procedure.

tbearhere

legendary

Activity: 3164

Merit: 1003

Anybody help please....I was forced to buy 2 970 gtx gigabyte g1 graphics cards...only wanted one. Newegg took my BTC and never gave it back forcing me to buy 2. Never doing business with them again. So I'm having problems with it.
I noticed on my 1st card installed it read out 3505,1455..so I set the clocks to 3505,1455.
When I installed the second card and looked at the clocks available .. it read out that both cards showed 3505,1519. ? ? ? Should I set them to 3505,1455 to get to the p0 state? Or should I just leave them in the p2 state? Thx

Amph

legendary

Activity: 3248

Merit: 1072

Quote from: joblo on April 17, 2016, 01:53:39 AM

Quote from: sp_ on April 16, 2016, 12:33:17 PM

Quote from: bensam1231 on April 15, 2016, 11:49:23 PM

And Decred is basically to worthless to mine now after the dual miner hit.
If you guys make a dual miner, please combine it with a different algo... Like Neoscrypt (although more memory hard).

I thought of a dual etherum miner a long time ago, and I also suggested this to Genoil here on bitcointalk. This was before decred came, and I was thinking of a dual Keccak(Maxcoin) + etherum.. You need a simple algo with no memory access to take advantage of the memory pipeline.

It's one thing to find two algos that can run tohether, but another thing to find two profitable algos.

decred was not even the second most profitable before this dual mining thing, but ti was more convenient to do the dual mining for the ram reasons

bensam1231

legendary

Activity: 1764

Merit: 1024

Quote from: sp_ on April 16, 2016, 12:33:17 PM

Quote from: bensam1231 on April 15, 2016, 11:49:23 PM

And Decred is basically to worthless to mine now after the dual miner hit.
If you guys make a dual miner, please combine it with a different algo... Like Neoscrypt (although more memory hard).

I thought of a dual etherum miner a long time ago, and I also suggested this to Genoil here on bitcointalk. This was before decred came, and I was thinking of a dual Keccak(Maxcoin) + etherum.. You need a simple algo with no memory access to take advantage of the memory pipeline.

Yet you guys didn't make one and he did. Dual mining in practice still seems relatively new and there isn't a Nvidia version for anything. Ideally... allowing someone to combine whatever algos they want would be great (whether or not it would work out well or not as far as performance goes).

Also keep in mind that it has to include a coin that's worth money. What uses Keccak and is worth mining?

Genoil

sr. member

Activity: 438

Merit: 250

Quote from: sp_ on April 16, 2016, 12:33:17 PM

Quote from: bensam1231 on April 15, 2016, 11:49:23 PM

And Decred is basically to worthless to mine now after the dual miner hit.
If you guys make a dual miner, please combine it with a different algo... Like Neoscrypt (although more memory hard).

I thought of a dual etherum miner a long time ago, and I also suggested this to Genoil here on bitcointalk. This was before decred came, and I was thinking of a dual Keccak(Maxcoin) + etherum.. You need a simple algo with no memory access to take advantage of the memory pipeline.

True that. I should have listened to you Grin

. Maxcoin would have been great. Perhaps I should try it anyway and see if we can pump it a bit.

joblo

legendary

Activity: 1470

Merit: 1114

Quote from: sp_ on April 16, 2016, 12:33:17 PM

Quote from: bensam1231 on April 15, 2016, 11:49:23 PM

And Decred is basically to worthless to mine now after the dual miner hit.
If you guys make a dual miner, please combine it with a different algo... Like Neoscrypt (although more memory hard).

I thought of a dual etherum miner a long time ago, and I also suggested this to Genoil here on bitcointalk. This was before decred came, and I was thinking of a dual Keccak(Maxcoin) + etherum.. You need a simple algo with no memory access to take advantage of the memory pipeline.

It's one thing to find two algos that can run tohether, but another thing to find two profitable algos.

Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 697. (Read 2347641 times)