Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 694. (Read 2347641 times)

Hi

have you made some watt-meter measurements at 700KH/s ? What clock speed and batch command line?

Thank you in advance

THANKS everyone for helping me.. very much appreciated  That hashrate on the 970 was at stock clocks.. it was doing 19 mh/s but unstable .. needed to set the intensity of course... it was the 970 causing the problem I think and so far it hashed overnight without crashing ..

PS anyone know how to open up a command window separate from an app using ccminer like MinerControl .. I need to see it like opening a reg ccminer window.  thx

On the 970 I'm getting 700 kh/s. sp 5 private.    = to 3.5 750ti. The best one you have so far sp for ALL algo's.

What cards are you testing on?. How much faster? My kernal does around 1MHASH on the 980ti.
15% more power is a waste.

I don't think so... I do have them set at p0 for any algo but thinking of just letting them stay at the p2 state.

1CTiNJyoUmbdMRACtteRWXhGqtSETYd6Vd


TXID:becf99c164222d671f5d0c098e6f66626a2c6dc129f5b55c00b857144da24504

0.1BTC

SP, just a FYI, your version is still not getting as good hash as DJMs Neoscrypt kernel.

Also another FYI, after DJM updated his kernels, it increased power usage by about 15%.

yes you're right, does setting them in p0 has some benefit outside of ethereum mining?

Yours are maybe in the p2 state. Mine are 3505,1455 in the p0 state.
I set my clocks to nvidia-smi -ac 3505,1455
When I have just one 970 it shows those clocks... but with 2 cards it showed 3505,1519  strange.
But I still set them as above even though one could be set higher.
Below is something someone gave me.
-----------------------------------------------------------------------

It is possible to oc the mem clock beyond nominal value, I use this command nvidia-smi.exe -i 0,1 -ac 3506,1506 (where i is the card number and ac the highest clock possible) this force the card to run in state 0

1) open cmd.exe with the admin privileges
2) cd C:\Program Files\NVIDIA Corporation\NVSMI
3) nvidia-smi -q -d SUPPORTED_CLOCKS -i 0
4) nvidia-smi -q -d SUPPORTED_CLOCKS -i 1
3) nvidia-smi -q -d SUPPORTED_CLOCKS -i 2
5) nvidia-smi -q -d SUPPORTED_CLOCKS -i 4
6) nvidia-smi -ac 350X,14XX -i 0 (where 350X is that very first number printed after supported clocks-memory and 14XX one of those numbers printed after graphics

cd C:\Program Files\NVIDIA Corporation\NVSMI
nvidia-smi -q -d SUPPORTED_CLOCKS -i 0 | more

cd C:\Program Files\NVIDIA Corporation\NVSMI
nvidia-smi -q -d SUPPORTED_CLOCKS -i 1 | more
---------------------------------------------------------------------

Now that I know my clocks , oc'ing must be off to set them, I use this.
Open administrative cmd window and I paste and enter this. Remember, look up your clocks first.
Two of those cards are 980ti  same clocks.

cd C:\Program Files\NVIDIA Corporation\NVSMI
nvidia-smi -ac 3505,1455 -i 0,1,2,4

can you check for me one thing on your 970, are your memory on 3000M without oc? or even with oc? mine are sitting there and no matter what oc i put they remain there....

something strange happened

SP  what is the default setting on sp 5 private for quark 970 g1?
EDIT: Looks like 23.
So far lowering the intensity is helping.
EDIT: That may have been the problem....I never set intensity on my regular rigs.
Will see be tomorrow.
This is the way I have it... but its working on all cards on some algo's. downing all the hashrates...and some algo's ..just on the card specified.
-d 0,1,2,3,4  -i 0,0,14,14,0

submitted a tiny speedup in jh512.

The groestl + jh change push quark 10-15KHASH on the gtx960M

Thx Schleicher... that is one thing out of the way... trying intensity settings now.

Submitted a tiny speedup in echo-512. X11 +2KHASH on the gtx960M. @github
 
Hehe I know It is nothing, but I just need to do it 100 more times.

sp private #5 all algo and that is stock clocks... it can do 1 mh/s more on quark.
And I think it was in p2 state.
EDIT: I thought that the 970 fans where suppose to be off when idle mine are not.

I got multiple problems now... will try that -i setting.  thx  psu 1200 continuous up to 1300 but drawing 1050 watts. It cuts off sometimes too.. it should not...but the fan is too slow.. can't find anything to override the psu fan speed.

The humidity is 18%    it is part of 3 problems.
It was hard getting the drivers installed on that card too but worked.
EDIT: Humidity 16% I don't believe it.... Can't go near the rig.

I got multiple problems now... will try that -i setting.  thx  psu 1200 continuous up to 1300 but drawing 1050 watts.
The sli connection yes connection.. I don't have them connected.

when i have hardware miner ..good job all

I submitted a tiny speedup in the groestl--512 algo @ github.