my 5x970 rig draws about 900W mining quark (stock clocks), 850W mining lyra2v2.
about 65W with idle gpus.
Topic: CCminer(SP-MOD) Modded NVIDIA Maxwell / Pascal kernels. - page 856. (Read 2347659 times)
Ah i see. I did not think it should be that much difference between the 980 and the 980Ti actually. I am going for 3x970 now instead, its the same price as for 2x980 here right now.
The whole 2x980 rig including system is pulling 375w from the wall during full load (overclocked) and that is actually really good.
The whole 2x980 rig including system is pulling 375w from the wall during full load (overclocked) and that is actually really good.
This is lyra2v2... tell us about quark or neoscrypt
I got two Inno3d 980 cards delivered today:
Running on R74, but not that happy about the perfomance.
Both cards are overclocked with 220Mhz
I am returning these and will switch them for 3x Asus Strix 970 cards instead.
The info could maybe be usefull for someone.
Running on R74, but not that happy about the perfomance.
Both cards are overclocked with 220Mhz
I am returning these and will switch them for 3x Asus Strix 970 cards instead.
The info could maybe be usefull for someone.
I think some of the kernals need some more tuning on the 950, 960, 980 and the 980ti. I have a few cards, but not enough to make it worth it.. Is that 375W for the whole rig? The cpu, harddrive and motherboard can draw 75W alone. Then you have 150W per card wich is pretty good. An AMD [email protected] MHASH use 200W
The whole 2x980 rig including system is pulling 375w from the wall during full load (overclocked) and that is actually really good.
980's give the best performance per watt, even better than two 980 ti's, price factor kept on a side.
I went from 2 970's, 1 970, 1 750 ti, to 3 970's, 1 750 ti, to 2 970's, 2 980's, and now finally two 2 980's and 2 980 ti's.
I think that keeping one card from almost every branch is great as it covers the entire spectrum of hash when solo mining. If you're a pool guy, then the bigger maxwells would favor you more.
Reference 980's take only 20W more than reference 970's, with the same 2 6-pin power connectors. Custom pcb cards are the worst for mining.
I got two Inno3d 980 cards delivered today:
Running on R74, but not that happy about the perfomance.
Both cards are overclocked with 220Mhz
I am returning these and will switch them for 3x Asus Strix 970 cards instead.
The info could maybe be usefull for someone.
Running on R74, but not that happy about the perfomance.
Both cards are overclocked with 220Mhz
I am returning these and will switch them for 3x Asus Strix 970 cards instead.
The info could maybe be usefull for someone.
I think some of the kernals need some more tuning on the 950, 960, 980 and the 980ti. I have a few cards, but not enough to make it worth it.. Is that 375W for the whole rig? The cpu, harddrive and motherboard can draw 75W alone. Then you have 150W per card wich is pretty good. An AMD [email protected] MHASH use 200W
The whole 2x980 rig including system is pulling 375w from the wall during full load (overclocked) and that is actually really good.
I got two Inno3d 980 cards delivered today:
Running on R74, but not that happy about the perfomance.
Both cards are overclocked with 220Mhz
I am returning these and will switch them for 3x Asus Strix 970 cards instead.
The info could maybe be usefull for someone.
Running on R74, but not that happy about the perfomance.
Both cards are overclocked with 220Mhz
I am returning these and will switch them for 3x Asus Strix 970 cards instead.
The info could maybe be usefull for someone.
I think some of the kernals need some more tuning on the 950, 960, 980 and the 980ti. I have a few cards, but not enough to make it worth it.. Is that 375W for the whole rig? The cpu, harddrive and motherboard can draw 75W alone. Then you have 150W per card wich is pretty good. An AMD [email protected] MHASH use 200W
I just want to poke my head in here to say thanks to SP. I've been converting everything I own from AMD to nVidia Maxwell and comparing SP-Mod to tpruvot.
SP-Mod rocks!
Donation sent. Buy yourself a 6 pack of your favorite beer.
Z
SP-Mod rocks!
Donation sent. Buy yourself a 6 pack of your favorite beer.
Z
Thanks
is this miners complete? it can mine every altcoin out there no limit?
if not which one are missed?
if not which one are missed?
There are so many around it's a very though question to answer. Let's say most of the popular coins are supported, except for example scrypt-Jane ones.
fair enough, if the last one are supported, and new one also it's ok i guess
does anyone have a good launch configuration or intensity setting for plain Scrypt algo for the 750ti? I use a config file to launch ccminer and neither "launch-config" nor "intensity" seem to be doing anything.
the cards always default to auto-tune, it always sets to T30x16 and i get "result does not validate on CPU" errors.
the cards always default to auto-tune, it always sets to T30x16 and i get "result does not validate on CPU" errors.
If memory serves me right, -l T5x24 is what you're looking for.
Good chance I don't remember this properly though, you know, old fart and all
i find that the T10 was slightly better when you oc the card
I got two Inno3d 980 cards delivered today:
Running on R74, but not that happy about the perfomance.
Both cards are overclocked with 220Mhz
I am returning these and will switch them for 3x Asus Strix 970 cards instead.
The info could maybe be usefull for someone.
Running on R74, but not that happy about the perfomance.
Both cards are overclocked with 220Mhz
I am returning these and will switch them for 3x Asus Strix 970 cards instead.
The info could maybe be usefull for someone.
I just want to poke my head in here to say thanks to SP. I've been converting everything I own from AMD to nVidia Maxwell and comparing SP-Mod to tpruvot.
SP-Mod rocks!
Donation sent. Buy yourself a 6 pack of your favorite beer.
Z
SP-Mod rocks!
Donation sent. Buy yourself a 6 pack of your favorite beer.
Z
Well since my great antec hcp-1300 died and it has a 7 year warranty I get a replacement free? Not. Antec's great rma services..it may be a month before I get a new one free oooo I have to pay for shipping on there free replacement. There process of getting a rma is fantastic ... 2 hrs before someone answers the phone that's great. And if I speed up the process they want a downpayment of twice what I paid for it. Yes ANTEC is a great company with fantastic service.
Sad to hear that. It seems like Antec hate their customers :/ 
Well since my great antec hcp-1300 died and it has a 7 year warranty I get a replacement free? Not. Antec's great rma services..it may be a month before I get a new one free oooo I have to pay for shipping on there free replacement. There process of getting a rma is fantastic ... 2 hrs before someone answers the phone that's great. And if I speed up the process they want a downpayment of twice what I paid for it. Yes ANTEC is a great company with fantastic service.
good to know. I'll be buying corsair. or the cheap lepa, so if it breaks not too soon I just throw it.
I only mined with it for 4 days too.
Well since my great antec hcp-1300 died and it has a 7 year warranty I get a replacement free? Not. Antec's great rma services..it may be a month before I get a new one free oooo I have to pay for shipping on there free replacement. There process of getting a rma is fantastic ... 2 hrs before someone answers the phone that's great. And if I speed up the process they want a downpayment of twice what I paid for it. Yes ANTEC is a great company with fantastic service.
good to know. I'll be buying corsair. or the cheap lepa, so if it breaks not too soon I just throw it.
WTF!
Well since my great antec hcp-1300 died and it has a 7 year warranty I get a replacement free? Not. Antec's great rma services..it may be a month before I get a new one free oooo I have to pay for shipping on there free replacement. There process of getting a rma is fantastic ... 2 hrs before someone answers the phone that's great. And if I speed up the process they want a downpayment of twice what I paid for it. Yes ANTEC is a great company with fantastic service.
That's brilliant! You should market it. A space heater that pays for itself.
No market tnx... I have a job allready
It is and it will be just for fun. I guess there won't be any profit with the gpus probably loosing price badly in 2016.
you do it because it's fun :-)
and what's behind, is that a heater? I assume you won't need it, then :-D
Yeah i am a computer geek and i like to mine, hopefully i can stack some btc up and sell some at 1000+ later on and what's behind, is that a heater? I assume you won't need it, then :-D
Gpu:s are pretty are atleast easy to sell if things going south for real.
Yup its a heater behind the rig, it is not used
I can understand You very well
That's my ~1kW maxwell heater btw:
Great build !
That's my ~1kW maxwell heater btw:
That's brilliant! You should market it. A space heater that pays for itself.
you do it because it's fun :-)
and what's behind, is that a heater? I assume you won't need it, then :-D
Yeah i am a computer geek and i like to mine, hopefully i can stack some btc up and sell some at 1000+ later on and what's behind, is that a heater? I assume you won't need it, then :-D
Gpu:s are pretty are atleast easy to sell if things going south for real.
Yup its a heater behind the rig, it is not used
I can understand You very well
That's my ~1kW maxwell heater btw:
you do it because it's fun :-)
and what's behind, is that a heater? I assume you won't need it, then :-D
Yeah i am a computer geek and i like to mine, hopefully i can stack some btc up and sell some at 1000+ later on and what's behind, is that a heater? I assume you won't need it, then :-D
Gpu:s are pretty are atleast easy to sell if things going south for real.
Yup its a heater behind the rig, it is not used
you do it because it's fun :-)
and what's behind, is that a heater? I assume you won't need it, then :-D
and what's behind, is that a heater? I assume you won't need it, then :-D
Jump to: