I clicked >log towards the bottom of the overview screen and it goes to a box with information. Nothing stood out but I wasn't sure what all I was looking at either. Is there something I should look for in this information? Retrying different pool information and waiting at least 30 minutes has not been yielding success.
show the log here I will post log on my dead 1041
{'STATUS':[{'STATUS':'S','When':0,'Code':11,'Msg':'Summary','Description':'cgminer 4.11.1'}],'SUMMARY':[{'Elapsed':179,'MHS av':0.00,}
{'MHS 30s':0.00,'MHS 1m':0.00,'MHS 5m':0.00,'MHS 15m':0.00,'Found Blocks':0,'Getworks':5,'Accepted':0,'Rejected':0,'Hardware Errors':0,'Utility':0.00,'Discarded':0,'Stale':0,'Get Failures':0,'Local Work':1,}
{'Remote Failures':0,'Network Blocks':1,'Total MH':0.0000,'Work Utility':0.00,'Difficulty Accepted':0.00000000,'Difficulty Rejected':0.00000000,'Difficulty Stale':0.00000000,'Best Share':0,'Device Hardware%':0.0000,'Device Rejected%':0.0000,'Pool Rejected%':0.0000,'Pool Stale%':0.0000,'Last getwork':0}
{'STATUS':[{'STATUS':'S','When':0,'Code':70,'Msg':'CGMiner stats','Description':'cgminer 4.11.1'}],
{'STATS':[{'STATS':0,'ID':'AVA100','Elapsed':179,'Calls':0,'Wait':0.000000,'Max':0.000000,'Min':99999999.000000,'MM ID0':'Ver[1041-19092901_cc801a3_3f2e3c6] DNA[020100000cf881b5] NETFAIL[0 0 0 0 0 0 0 0] SYSTEMSTATU[Work: In Work, Hash Board: 0] Elapsed[181] }
{MW[0 0] LW[0] MH[0 0] HW[0] DH[0.000%] Temp[32] TMax[32] TAvg[32] Fan1[5652] Fan2[5832] FanR[100%] Vo[2] PS[16 1202 11 9 0 1340] PLL0[0 0 0 0] PLL1[0 0 0 0] GHSmm[0.00] GHSavg[0.00] WU[0.00] Freq[0.00] Led[0] MGHS[0.00 0.00] MTmax[-40 -40] MTavg[0 32] TA[0] ECHU[131073 131073]
ECMM[1] SF0[500 550 575 587] SF1[500 550 575 587] PVT_T0[-40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40
-40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40
-40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40
-40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40
-40 -40 -40]
PVT_T1[-40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40]
PVT_V0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
PVT_V1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0]
MW0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
I know those 0's are wrong and the psu puts out 0 volts
I not sure what is wrong as my connections look good.
Dead as a door nail for the moment. Not sure what to reset or clear to get psu to turn on.
[/quote]
[/quote]
The psu is shorted out. And so are the two hash boards.
I have 3 a1041's
2 good 1 bad the log above is bad unit.