Claymore XPM GPU Miner discussion - page 35.

triton0550

newbie

Activity: 12

Merit: 0

Quote from: Strannik-74 on April 23, 2014, 11:16:41 AM

http://clip2net.com/clip/m0/thumb640/1398266105-clip-16kb.png
11ch = This is block, 10ch - do not block
(10ch это нифига не блок, а вот 11ch это уже блок))

Так у многих он и между 10ch и 11ch появляется. Он засчитывается в 10ch и соответственно пишет найден блок.
У самого вчера было 7 блоков 10ch и 1 всего засчитан. ypool имеет 95% - 97% всех решений, скорее всего они быстрее успевают решить, а у нас увы )

Strannik-74

full member

Activity: 348

Merit: 102

Croak

member

Activity: 98

Merit: 10

Quote from: aikklond on April 23, 2014, 10:54:26 AM

what advantage do you think an R9 290 vs a 280X? 50% or more?

About 25%. 200k 4ch with my 290s at 1100mhz, 140k 4ch with my 280x cards at 1200. 2 CPD vs 1.5 CPD solo rating. 75k 4ch and .8 CPD for my 270s.

aikklond

legendary

Activity: 1148

Merit: 1000

what advantage do you think an R9 290 vs a 280X? 50% or more?

triton0550

newbie

Activity: 12

Merit: 0

R9 290X Tri-x OC

══════════════════════════════════════════════════════════════════════════════
Wed Apr 23 18:02:29 2014
New Block: 507192 - Current Diff: 10.815703
Total/Valid blocks: [ 0 / 0 ] - Max diff: 10.292627
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 1620K] [ 1069] [ 95] [ 7] [ 3] [ 0] [ 0]
ch/h: [ 204102] [134.626] [ 11.964] [ 0.882] [ 0.378] [ 0.000] [ 0.000]
Estimated CPD: 2.3211, Average CPD: 9.0674, Mining time: 07:56
══════════════════════════════════════════════════════════════════════════════
sieve: 130, fermat: 83, total: 233 Total Round Time (TRT): 233
sieve: 130, fermat: 83, total: 234 Total Round Time (TRT): 234

I found none of the three units is not counted. Sad

(Ни один из найденых трех блоков не засчитался. Печалька)

slimdim

full member

Activity: 140

Merit: 100

Quote from: Croak on April 23, 2014, 08:32:46 AM

Quote from: jollyriffic on April 23, 2014, 08:28:01 AM

Quote from: slimdim on April 23, 2014, 08:04:55 AM

and has to be?

3000 or so is what a forum said.
i'm currently at 2185

Right from the wallet guys:

Code:

Generated coins must mature 3200 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.

when I found the block and the program costs - doesn't work more.and has to be? restart?
ang GPU load be 92%
but on the screen occurred nothing....

Croak

member

Activity: 98

Merit: 10

Quote from: jollyriffic on April 23, 2014, 08:28:01 AM

Quote from: slimdim on April 23, 2014, 08:04:55 AM

and has to be?

3000 or so is what a forum said.
i'm currently at 2185

Right from the wallet guys:

Code:

Generated coins must mature 3200 blocks before they can be spent. When you generated this block, it was broadcast to the network to be added to the block chain. If it fails to get into the chain, its state will change to "not accepted" and it won't be spendable. This may occasionally happen if another node generates a block within a few seconds of yours.

jollyriffic

full member

Activity: 126

Merit: 100

Quote from: slimdim on April 23, 2014, 08:04:55 AM

and has to be?

3000 or so is what a forum said.
i'm currently at 2185

slimdim

full member

Activity: 140

Merit: 100

and has to be?

SpeedDemon13

hero member

Activity: 518

Merit: 500

Quote from: liifer on April 23, 2014, 06:10:25 AM

Quote from: mafostedu on April 23, 2014, 01:56:06 AM

Quote from: jollyriffic on April 22, 2014, 07:37:48 PM

Quote from: mafostedu on April 22, 2014, 05:52:21 PM

Can anybody mining with 290 (non-x) Tri-x share their 4ch rate ?
I get only 17xxxx which is similar to reference 290 card !
Tri-x should produce more, I have read someone is getting over 2xxxxx

I run with stock rate (no OC) i.e. Core 1000 & Memory 1300

Can someone mention better core/memory combination to reach above 200k 4ch ?

core 1025 or 1000, mem 1500
on a 7950 i get 119,353 currently with 1100/1500
make sure you're setting the miner at 4 cores and higher cpu usage

Thanks for the reply, but 7950 is different from 290 Tri-x
I don't think we need to increase memory for it, rather I get better result by decreasing it upto 1000 for scrypt or heavycoin mining.
Yes, core could be increased for sure. I was getting optimum result for heavycoin mining with 1100 core & 1000 memory but
when I use the same setting for this miner, it crashes after 15-30 min.

I am using
-Motherboard : Intel DZ87KLT-75K
-Processor : Intel Core i5 4660
-PSU : Cooler Master Silent Pro 1200 Gold
-RAM : Corsair Vengeance 8GB (Single Stick)
-3x GPU : Sapphire 290 Tri-x OC edition (2 directly attached to MB & 1 on USB powered riser)

Please post your 4ch result & core/memory setting to obtain that.
As I said earlier I get only 177k with stock rate (1000/1300) & not at all satisfied with it.

BTW with the above 3 cards my Processor is using 30-35% of the resources.

I think it crashes because you have two cards on board and when you overclock them, they overheat or something.

Quote from: SpeedDemon13 on April 22, 2014, 07:54:21 PM

I know that you stated in the read me that older cards are not supported, but it would be a niche if you can update the miner to be able to use HD6xxx/HD5xxx series cards. Other miners lack that and it would be an interesting challenge too, plus an advantage.

It would be a waste of time. These card dont break even anymore. Better work on cards that really earn something.

Some of those cards are more powerful than some of the mid to low-end GCN cards, especially the 5850,5870,6950,6970,5970 and 6990.

mafostedu

full member

Activity: 171

Merit: 100

Quote from: liifer on April 23, 2014, 06:10:25 AM

Quote from: mafostedu on April 23, 2014, 01:56:06 AM

Quote from: jollyriffic on April 22, 2014, 07:37:48 PM

Quote from: mafostedu on April 22, 2014, 05:52:21 PM

Can anybody mining with 290 (non-x) Tri-x share their 4ch rate ?
I get only 17xxxx which is similar to reference 290 card !
Tri-x should produce more, I have read someone is getting over 2xxxxx

I run with stock rate (no OC) i.e. Core 1000 & Memory 1300

Can someone mention better core/memory combination to reach above 200k 4ch ?

core 1025 or 1000, mem 1500
on a 7950 i get 119,353 currently with 1100/1500
make sure you're setting the miner at 4 cores and higher cpu usage

Thanks for the reply, but 7950 is different from 290 Tri-x
I don't think we need to increase memory for it, rather I get better result by decreasing it upto 1000 for scrypt or heavycoin mining.
Yes, core could be increased for sure. I was getting optimum result for heavycoin mining with 1100 core & 1000 memory but
when I use the same setting for this miner, it crashes after 15-30 min.

I am using
-Motherboard : Intel DZ87KLT-75K
-Processor : Intel Core i5 4660
-PSU : Cooler Master Silent Pro 1200 Gold
-RAM : Corsair Vengeance 8GB (Single Stick)
-3x GPU : Sapphire 290 Tri-x OC edition (2 directly attached to MB & 1 on USB powered riser)

Please post your 4ch result & core/memory setting to obtain that.
As I said earlier I get only 177k with stock rate (1000/1300) & not at all satisfied with it.

BTW with the above 3 cards my Processor is using 30-35% of the resources.

I think it crashes because you have two cards on board and when you overclock them, they overheat or something.

No it doesn't overheat, I have all setup in a server room with A.C. always on & with fan speed at 85% I hardly get any card over 50 degrees Celsius, so I don't think it crashes because of overheating or something. I even tried with a single card loaded to 16x PCIe 3.0 slot (no riser) still it got crashed after few minutes of hitting over 190k 4ch.

I could mine well with scrypt & heavycoin miner with same overclocking without crash upto 4 cards on single 1200 W Gold PSU (2 attached to MB & 2 on 1x to 16x USB powered risers)

slimdim

full member

Activity: 140

Merit: 100

I found the block and the program costs - doesn't work more.and has to be? restart?

liifer

newbie

Activity: 34

Merit: 0

Quote from: mafostedu on April 23, 2014, 01:56:06 AM

Quote from: jollyriffic on April 22, 2014, 07:37:48 PM

Quote from: mafostedu on April 22, 2014, 05:52:21 PM

Can anybody mining with 290 (non-x) Tri-x share their 4ch rate ?
I get only 17xxxx which is similar to reference 290 card !
Tri-x should produce more, I have read someone is getting over 2xxxxx

I run with stock rate (no OC) i.e. Core 1000 & Memory 1300

Can someone mention better core/memory combination to reach above 200k 4ch ?

core 1025 or 1000, mem 1500
on a 7950 i get 119,353 currently with 1100/1500
make sure you're setting the miner at 4 cores and higher cpu usage

Thanks for the reply, but 7950 is different from 290 Tri-x
I don't think we need to increase memory for it, rather I get better result by decreasing it upto 1000 for scrypt or heavycoin mining.
Yes, core could be increased for sure. I was getting optimum result for heavycoin mining with 1100 core & 1000 memory but
when I use the same setting for this miner, it crashes after 15-30 min.

I am using
-Motherboard : Intel DZ87KLT-75K
-Processor : Intel Core i5 4660
-PSU : Cooler Master Silent Pro 1200 Gold
-RAM : Corsair Vengeance 8GB (Single Stick)
-3x GPU : Sapphire 290 Tri-x OC edition (2 directly attached to MB & 1 on USB powered riser)

Please post your 4ch result & core/memory setting to obtain that.
As I said earlier I get only 177k with stock rate (1000/1300) & not at all satisfied with it.

BTW with the above 3 cards my Processor is using 30-35% of the resources.

I think it crashes because you have two cards on board and when you overclock them, they overheat or something.

Quote from: SpeedDemon13 on April 22, 2014, 07:54:21 PM

I know that you stated in the read me that older cards are not supported, but it would be a niche if you can update the miner to be able to use HD6xxx/HD5xxx series cards. Other miners lack that and it would be an interesting challenge too, plus an advantage.

It would be a waste of time. These card dont break even anymore. Better work on cards that really earn something.

Croak

member

Activity: 98

Merit: 10

With 15 cards (4x 290, 4x 280x, 7x 270) I found 4 blocks in less than 4 hours yesterday, then nothing for 16 hours, but then two more blocks in an hour this morning. Been mining solo for 22 hours now.

https://www.dropbox.com/s/lb7wb51zrm2i9ag/6blocks.JPG

That's only a little better than I would have earned in 24 hours on ypool based on my average for the last week. There's two hours to go for a full 24 though, could get lucky still.

Interestingly enough, each card type has found 2 blocks...2 blocks for the 290s, 2 blocks for the 280x, and 2 blocks for the 270s.

jollyriffic

full member

Activity: 126

Merit: 100

if you can do 1100/1500 go for those clocks.
then restart your mining.

roughly you should land around
190,964 if not higher.
my 7950 was just a reference, not too hard to figure out what your card should do in comparison.

Quote from: antonio8 on April 23, 2014, 02:07:23 AM

Just curious.

How long does it take a block to mature once in your wallet?

i'm waiting 2 days now and its still not mature.

antonio8

legendary

Activity: 1400

Merit: 1000

Just curious.

How long does it take a block to mature once in your wallet?

mafostedu

full member

Activity: 171

Merit: 100

Quote from: jollyriffic on April 22, 2014, 07:37:48 PM

Quote from: mafostedu on April 22, 2014, 05:52:21 PM

Can anybody mining with 290 (non-x) Tri-x share their 4ch rate ?
I get only 17xxxx which is similar to reference 290 card !
Tri-x should produce more, I have read someone is getting over 2xxxxx

I run with stock rate (no OC) i.e. Core 1000 & Memory 1300

Can someone mention better core/memory combination to reach above 200k 4ch ?

core 1025 or 1000, mem 1500
on a 7950 i get 119,353 currently with 1100/1500
make sure you're setting the miner at 4 cores and higher cpu usage

Thanks for the reply, but 7950 is different from 290 Tri-x
I don't think we need to increase memory for it, rather I get better result by decreasing it upto 1000 for scrypt or heavycoin mining.
Yes, core could be increased for sure. I was getting optimum result for heavycoin mining with 1100 core & 1000 memory but
when I use the same setting for this miner, it crashes after 15-30 min.

I am using
-Motherboard : Intel DZ87KLT-75K
-Processor : Intel Core i5 4660
-PSU : Cooler Master Silent Pro 1200 Gold
-RAM : Corsair Vengeance 8GB (Single Stick)
-3x GPU : Sapphire 290 Tri-x OC edition (2 directly attached to MB & 1 on USB powered riser)

Please post your 4ch result & core/memory setting to obtain that.
As I said earlier I get only 177k with stock rate (1000/1300) & not at all satisfied with it.

BTW with the above 3 cards my Processor is using 30-35% of the resources.

slimdim

full member

Activity: 140

Merit: 100

16 hours solo
2*280x cards
no block.... Angry

antonio8

legendary

Activity: 1400

Merit: 1000

Not a full day of mining but wanted to say how I am doing. Both only running for about 14 hours solo.

R9 280x: Estimated CPD: 1.4795 Avg. CPD: 3.2926
R9 270: Estimated CPD: 0.7186 Avg. CPD: 3.3287

Tried to post pic but don't know how to insert it.

SpeedDemon13

hero member

Activity: 518

Merit: 500

I know that you stated in the read me that older cards are not supported, but it would be a niche if you can update the miner to be able to use HD6xxx/HD5xxx series cards. Other miners lack that and it would be an interesting challenge too, plus an advantage.

Topic: Claymore XPM GPU Miner discussion - page 35. (Read 142100 times)