I think the gpu-miner should have a feature to choose chain length for solo-mining. Finding 7ch, 8ch, 9ch is useless. We need only 10ch for solo.
sub 10 chains are byproduct. you need to test for them before testing 10.
Topic: Claymore XPM GPU Miner discussion - page 38. (Read 142120 times)
sub 10 chains are byproduct. you need to test for them before testing 10.
readme says -ss 1 and 2 available
-ss 0 disalable for miner v3.0?
what about -t ? any advice to use it? (6 GPU on athlone x2 x250)
-ss 0 disalable for miner v3.0?
what about -t ? any advice to use it? (6 GPU on athlone x2 x250)
Try "-ss 2 -t 8" if your CPU is slow. It's a good idea to test different values and see changes in 4ch/h.
readme says -ss 1 and 2 available
-ss 0 disalable for miner v3.0?
what about -t ? any advice to use it? (6 GPU on athlone x2 x250)
-ss 0 disalable for miner v3.0?
what about -t ? any advice to use it? (6 GPU on athlone x2 x250)
I think the gpu-miner should have a feature to choose chain length for solo-mining. Finding 7ch, 8ch, 9ch is useless. We need only 10ch for solo.
turn on upnp in your router, the wallet should make use of upnp to forward the incoming connections automatically.
If that doesn't work to increase your connection count, you could do manual forwarding but I suspect it may not help much...
@Slimdim, Claymore did say solo and pool similar results
If that doesn't work to increase your connection count, you could do manual forwarding but I suspect it may not help much...
@Slimdim, Claymore did say solo and pool similar results
R9 290Х Tri-x OC
sieve: 124, fermat: 77, total: 228 Total Round Time (TRT): 228
sieve: 123, fermat: 78, total: 220 Total Round Time (TRT): 220
══════════════════════════════════════════════════════════════════════════════
Tue Apr 22 11:27:05 2014
New Block: 505235 - Current Diff: 10.810908
Total/Valid blocks: [ 0 / 0 ] - Max diff: 10.540777
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 283K] [ 201] [ 22] [ 1] [ 1] [ 0] [ 0]
ch/h: [ 209187] [148.437] [ 16.247] [ 0.738] [ 0.738] [ 0.000] [ 0.000]
Estimated CPD: 2.5593, Average CPD: 17.7238, Mining time: 01:21
══════════════════════════════════════════════════════════════════════════════
sieve: 124, fermat: 77, total: 228 Total Round Time (TRT): 228
sieve: 123, fermat: 78, total: 220 Total Round Time (TRT): 220
══════════════════════════════════════════════════════════════════════════════
Tue Apr 22 11:27:05 2014
New Block: 505235 - Current Diff: 10.810908
Total/Valid blocks: [ 0 / 0 ] - Max diff: 10.540777
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 283K] [ 201] [ 22] [ 1] [ 1] [ 0] [ 0]
ch/h: [ 209187] [148.437] [ 16.247] [ 0.738] [ 0.738] [ 0.000] [ 0.000]
Estimated CPD: 2.5593, Average CPD: 17.7238, Mining time: 01:21
══════════════════════════════════════════════════════════════════════════════
Bah I'm confused with the nodes thing.
Started solo mining, reached 8 connections in an instant. Read the guide, says having 8 connections is bad and I need more. Couple hours of tinkering with my linux router and opening port 9911 for both TCP and UDP => getting 6 connections now. Tried adding some nodes to the primecoin.conf file, doesn't seem to help. Keeping the port closed gets me more connections, any tips?
Here's the peerinfo from debug window: http://tny.cz/ce42f425
I find it strange that from all the peers I'm connected to, none has "IPV4address:9911"
Started solo mining, reached 8 connections in an instant. Read the guide, says having 8 connections is bad and I need more. Couple hours of tinkering with my linux router and opening port 9911 for both TCP and UDP => getting 6 connections now. Tried adding some nodes to the primecoin.conf file, doesn't seem to help. Keeping the port closed gets me more connections, any tips?
Here's the peerinfo from debug window: http://tny.cz/ce42f425
I find it strange that from all the peers I'm connected to, none has "IPV4address:9911"
i think we should know the exact port number
edit:what ever i try i couldnt pass 8
you have to forward the port that primecoin wallet uses (when upnp doesnt work)
whats theport number that primecoin wallet uses?
5x7950 Solo
(5x7950 Соло) =))
(5x7950 Соло) =))
2x280X MSI
══════════════════════════════════════════════════════════════════════════════
Tue Apr 22 12:55:18 2014
New Block: 505202 - Current Diff: 10.810872
Total/Valid shares: [ 560 / 539 ] - Max diff: 9.337728
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 795K] [ 515] [ 43] [ 2] [ 0] [ 0] [ 0]
ch/h: [ 143722] [ 93.096] [ 7.773] [ 0.362] [ 0.000] [ 0.000] [ 0.000]
Estimated CPD: 1.6051, Average CPD: 0.0000, Mining time: 05:31
══════════════════════════════════════════════════════════════════════════════
══════════════════════════════════════════════════════════════════════════════
Tue Apr 22 13:02:34 2014
New Block: 505213 - Current Diff: 10.810956
Total/Valid shares: [ 606 / 586 ] - Max diff: 10.924097
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 816K] [ 558] [ 42] [ 4] [ 2] [ 0] [ 0]
ch/h: [ 143981] [ 98.402] [ 7.407] [ 0.705] [ 0.353] [ 0.000] [ 0.000]
Estimated CPD: 1.6966, Average CPD: 8.4647, Mining time: 05:40
══════════════════════════════════════════════════════════════════════════════
══════════════════════════════════════════════════════════════════════════════
Tue Apr 22 12:55:18 2014
New Block: 505202 - Current Diff: 10.810872
Total/Valid shares: [ 560 / 539 ] - Max diff: 9.337728
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 795K] [ 515] [ 43] [ 2] [ 0] [ 0] [ 0]
ch/h: [ 143722] [ 93.096] [ 7.773] [ 0.362] [ 0.000] [ 0.000] [ 0.000]
Estimated CPD: 1.6051, Average CPD: 0.0000, Mining time: 05:31
══════════════════════════════════════════════════════════════════════════════
══════════════════════════════════════════════════════════════════════════════
Tue Apr 22 13:02:34 2014
New Block: 505213 - Current Diff: 10.810956
Total/Valid shares: [ 606 / 586 ] - Max diff: 10.924097
[ 4ch] [ 7ch] [ 8ch] [ 9ch] [ 10ch] [ 11ch] [ 12ch]
Total: [ 816K] [ 558] [ 42] [ 4] [ 2] [ 0] [ 0]
ch/h: [ 143981] [ 98.402] [ 7.407] [ 0.705] [ 0.353] [ 0.000] [ 0.000]
Estimated CPD: 1.6966, Average CPD: 8.4647, Mining time: 05:40
══════════════════════════════════════════════════════════════════════════════
2*280x cards
Estimated CPD: 1.6543, Average CPD: 0.0000, Mining time: 00:23
Estimated CPD: 1.2546, Average CPD: 0.0000, Mining time: 00:23
ch/h 4: 120922
ch/h 4: 120416
sieve: 179, fermat: 147, total: 358 Total Round Time (TRT): 358
sieve: 180, fermat: 150, total: 364 Total Round Time (TRT): 364
and 8 active connections....it is impossible to make more
Estimated CPD: 1.6543, Average CPD: 0.0000, Mining time: 00:23
Estimated CPD: 1.2546, Average CPD: 0.0000, Mining time: 00:23
ch/h 4: 120922
ch/h 4: 120416
sieve: 179, fermat: 147, total: 358 Total Round Time (TRT): 358
sieve: 180, fermat: 150, total: 364 Total Round Time (TRT): 364
and 8 active connections....it is impossible to make more
How's everyone's results with the solo miner? (Per card model and setup)
Bah I'm confused with the nodes thing.
Started solo mining, reached 8 connections in an instant. Read the guide, says having 8 connections is bad and I need more. Couple hours of tinkering with my linux router and opening port 9911 for both TCP and UDP => getting 6 connections now. Tried adding some nodes to the primecoin.conf file, doesn't seem to help. Keeping the port closed gets me more connections, any tips?
Here's the peerinfo from debug window: http://tny.cz/ce42f425
I find it strange that from all the peers I'm connected to, none has "IPV4address:9911"
Started solo mining, reached 8 connections in an instant. Read the guide, says having 8 connections is bad and I need more. Couple hours of tinkering with my linux router and opening port 9911 for both TCP and UDP => getting 6 connections now. Tried adding some nodes to the primecoin.conf file, doesn't seem to help. Keeping the port closed gets me more connections, any tips?
Here's the peerinfo from debug window: http://tny.cz/ce42f425
I find it strange that from all the peers I'm connected to, none has "IPV4address:9911"
i think we should know the exact port number
edit:what ever i try i couldnt pass 8
you have to forward the port that primecoin wallet uses (when upnp doesnt work)
Bah I'm confused with the nodes thing.
Started solo mining, reached 8 connections in an instant. Read the guide, says having 8 connections is bad and I need more. Couple hours of tinkering with my linux router and opening port 9911 for both TCP and UDP => getting 6 connections now. Tried adding some nodes to the primecoin.conf file, doesn't seem to help. Keeping the port closed gets me more connections, any tips?
Here's the peerinfo from debug window: http://tny.cz/ce42f425
I find it strange that from all the peers I'm connected to, none has "IPV4address:9911"
Started solo mining, reached 8 connections in an instant. Read the guide, says having 8 connections is bad and I need more. Couple hours of tinkering with my linux router and opening port 9911 for both TCP and UDP => getting 6 connections now. Tried adding some nodes to the primecoin.conf file, doesn't seem to help. Keeping the port closed gets me more connections, any tips?
Here's the peerinfo from debug window: http://tny.cz/ce42f425
I find it strange that from all the peers I'm connected to, none has "IPV4address:9911"
i think we should know the exact port number
edit:what ever i try i couldnt pass 8
Bah I'm confused with the nodes thing.
Started solo mining, reached 8 connections in an instant. Read the guide, says having 8 connections is bad and I need more. Couple hours of tinkering with my linux router and opening port 9911 for both TCP and UDP => getting 6 connections now. Tried adding some nodes to the primecoin.conf file, doesn't seem to help. Keeping the port closed gets me more connections, any tips?
Here's the peerinfo from debug window: http://tny.cz/ce42f425
I find it strange that from all the peers I'm connected to, none has "IPV4address:9911"
Started solo mining, reached 8 connections in an instant. Read the guide, says having 8 connections is bad and I need more. Couple hours of tinkering with my linux router and opening port 9911 for both TCP and UDP => getting 6 connections now. Tried adding some nodes to the primecoin.conf file, doesn't seem to help. Keeping the port closed gets me more connections, any tips?
Here's the peerinfo from debug window: http://tny.cz/ce42f425
I find it strange that from all the peers I'm connected to, none has "IPV4address:9911"
same here, i had 21 connections before i added the nodes.
i didnt do anything with my router.
now i'm down to 9 connections
Bah I'm confused with the nodes thing.
Started solo mining, reached 8 connections in an instant. Read the guide, says having 8 connections is bad and I need more. Couple hours of tinkering with my linux router and opening port 9911 for both TCP and UDP => getting 6 connections now. Tried adding some nodes to the primecoin.conf file, doesn't seem to help. Keeping the port closed gets me more connections, any tips?
Here's the peerinfo from debug window: http://tny.cz/ce42f425
I find it strange that from all the peers I'm connected to, none has "IPV4address:9911"
Edit: here's the getpeerinfo with port closed, very different looking peers: http://tny.cz/2ecf7789
Started solo mining, reached 8 connections in an instant. Read the guide, says having 8 connections is bad and I need more. Couple hours of tinkering with my linux router and opening port 9911 for both TCP and UDP => getting 6 connections now. Tried adding some nodes to the primecoin.conf file, doesn't seem to help. Keeping the port closed gets me more connections, any tips?
Here's the peerinfo from debug window: http://tny.cz/ce42f425
I find it strange that from all the peers I'm connected to, none has "IPV4address:9911"
Edit: here's the getpeerinfo with port closed, very different looking peers: http://tny.cz/2ecf7789
Can i run 2 cards with 1 bat on SOLO?
The miner says GPU Device: 1
I have this in my bat: di 1,2 -ss 0 -t 4 -sd 0 -hc 512
The miner says GPU Device: 1
I have this in my bat: di 1,2 -ss 0 -t 4 -sd 0 -hc 512
he previously said to run each card on its own bat. so i'm guessing its not supported
Can i run 2 cards with 1 bat on SOLO?
The miner says GPU Device: 1
I have this in my bat: di 1,2 -ss 0 -t 4 -sd 0 -hc 512
The miner says GPU Device: 1
I have this in my bat: di 1,2 -ss 0 -t 4 -sd 0 -hc 512
It is very important to have a lot of connections in Primecoin wallet, otherwise you will have many orphaned blocks.
So if you have only 8 active connections, you need to allow incoming connections, check related topics about it.
you guys know how to increase this connection ?
i'm thinking maybe this has to do with adding peers
did some searching and you can do a command called getpeerinfo
it will spit out a file that includes ip addresses
from that you take the ip addresses and format them like this in your config
addnode=210.44.211.16:9911
addnode=206.217.128.2:9911
addnode=144.76.194.77:9911
addnode=66.41.100.146:9911
addnode=66.31.220.87:9911
addnode=190.151.124.146:9911
addnode=81.47.171.163:23539
addnode=213.21.33.13:8805
addnode=46.231.209.170:1644
addnode=15.185.126.29:63565
addnode=91.185.48.133:58444
addnode=192.182.137.8:50346
addnode=101.77.75.7:62136
addnode=203.189.24.21:11635
addnode=173.203.101.6:9911
addnode=31.42.188.194:63898
addnode=88.247.45.201:58138
addnode=201.22.6.178:58306
addnode=220.82.236.221:55290
these are the peers i pulled.
if you have any others that i don't hit me with your list
Thats some good numbers
Jump to: