Claymore XPM GPU Miner discussion - page 37.

jgle

member

Activity: 85

Merit: 10

Quote from: jgle on April 22, 2014, 10:20:45 AM

Quote from: Croak on April 22, 2014, 10:18:01 AM

Quote from: jgle on April 22, 2014, 10:08:33 AM

How is this? 3X280X is close to 13 hours has found the block. Generate false for this reason?

It's all .

I've hit 4 blocks in 5 hours with 15 cards running:

https://www.dropbox.com/s/cdy21vktr8zhiy7/4blocks.JPG

Gratifying! Ha-ha. How do you set? Give your settings?

https://www.dropbox.com/s/xwtso0djwfdf8pd/20140422225023.jpg
https://www.dropbox.com/s/syxl4t7nk56o2e6/20140422225405.jpg

jgle

member

Activity: 85

Merit: 10

Quote from: Croak on April 22, 2014, 10:18:01 AM

Quote from: jgle on April 22, 2014, 10:08:33 AM

How is this? 3X280X is close to 13 hours has found the block. Generate false for this reason?

It's all .

I've hit 4 blocks in 5 hours with 15 cards running:

https://www.dropbox.com/s/cdy21vktr8zhiy7/4blocks.JPG

Gratifying! Ha-ha. How do you set? Give your settings?

Croak

member

Activity: 98

Merit: 10

Quote from: jgle on April 22, 2014, 10:08:33 AM

How is this? 3X280X is close to 13 hours has not found the block. Generate false for this reason?

It's all luck.

I've hit 4 blocks in 5 hours with 15 cards running:

https://www.dropbox.com/s/cdy21vktr8zhiy7/4blocks.JPG

jgle

member

Activity: 85

Merit: 10

How is this? 3X280X is close to 13 hours has not found the block. Generate false for this reason?

Strannik-74

full member

Activity: 348

Merit: 102

Quote from: antonio8 on April 22, 2014, 08:44:47 AM

When changing settings, how long should we wait to see 4ch before trying a new setting? 15 mins, 30 mins, hours?

15 min after restart a new setting

antonio8

legendary

Activity: 1400

Merit: 1000

When changing settings, how long should we wait to see 4ch before trying a new setting? 15 mins, 30 mins, hours?

aikklond

legendary

Activity: 1148

Merit: 1000

I have 2*7950 + 1* 7870, do you people think I should go solo or ypool?

with this config I will need 2 days for getting a block or less?

Croak

member

Activity: 98

Merit: 10

Quote from: Strannik-74 on April 22, 2014, 08:26:58 AM

5x7950 104k 4ch/h 8hour Solo= 0 XPM What am I doing wrong?

Nothing. Your numbers look good. It's all up to luck.

Raiden

newbie

Activity: 17

Merit: 0

Quote from: Croak on April 22, 2014, 08:21:39 AM

Been lucky so far solo today, 3 blocks in less than 3 hours:

2 blocks on one card (290):

https://www.dropbox.com/s/1q80t4xlvg82o1k/2blocks.JPG

1 block on another (280x):

https://www.dropbox.com/s/z2jvj3si2dlu0mc/3blocks.JPG

！！You are so lucky...

Strannik-74

full member

Activity: 348

Merit: 102

5x7950 104k 4ch/h 8hour Solo= 0 XPM What am I doing wrong?

Croak

member

Activity: 98

Merit: 10

Been lucky so far solo today, 3 blocks in less than 3 hours:

2 blocks on one card (290):

https://www.dropbox.com/s/1q80t4xlvg82o1k/2blocks.JPG

1 block on another (280x):

https://www.dropbox.com/s/z2jvj3si2dlu0mc/3blocks.JPG

ozzy1926

sr. member

Activity: 378

Merit: 250

Quote from: Claymore on April 22, 2014, 07:35:05 AM

Quote from: ozzy1926 on April 22, 2014, 07:15:05 AM

Quote from: Judgment on April 22, 2014, 06:45:57 AM

Quote from: slimdim on April 22, 2014, 06:42:01 AM

Quote from: Judgment on April 22, 2014, 06:21:36 AM

Ok I'm seeing 21 active connections now on my wallet, here's how:

Keeping the port closed when starting the wallet, open it after 5 mins or so. In couple hours, the connections shoot up.

what port number?

9911, the one most used by primecoin network.

should we change rpcport=7332 to 9911 in the .conf file?

Don't do it. "rpcport" port is used for the miner only, not for primecoin network.

then should we just open the port 9911 from router than leave everything default?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: ozzy1926 on April 22, 2014, 07:15:05 AM

Quote from: Judgment on April 22, 2014, 06:45:57 AM

Quote from: slimdim on April 22, 2014, 06:42:01 AM

Quote from: Judgment on April 22, 2014, 06:21:36 AM

Ok I'm seeing 21 active connections now on my wallet, here's how:

Keeping the port closed when starting the wallet, open it after 5 mins or so. In couple hours, the connections shoot up.

what port number?

9911, the one most used by primecoin network.

should we change rpcport=7332 to 9911 in the .conf file?

Don't do it. "rpcport" port is used for the miner only, not for primecoin network.

ozzy1926

sr. member

Activity: 378

Merit: 250

Quote from: Judgment on April 22, 2014, 06:45:57 AM

Quote from: slimdim on April 22, 2014, 06:42:01 AM

Quote from: Judgment on April 22, 2014, 06:21:36 AM

Ok I'm seeing 21 active connections now on my wallet, here's how:

Keeping the port closed when starting the wallet, open it after 5 mins or so. In couple hours, the connections shoot up.

what port number?

9911, the one most used by primecoin network.

should we change rpcport=7332 to 9911 in the .conf file?

Judgment

newbie

Activity: 26

Merit: 0

Quote from: slimdim on April 22, 2014, 06:42:01 AM

Quote from: Judgment on April 22, 2014, 06:21:36 AM

Ok I'm seeing 21 active connections now on my wallet, here's how:

Keeping the port closed when starting the wallet, open it after 5 mins or so. In couple hours, the connections shoot up.

what port number?

9911, the one most used by primecoin network.

slimdim

full member

Activity: 140

Merit: 100

Quote from: Judgment on April 22, 2014, 06:21:36 AM

Ok I'm seeing 21 active connections now on my wallet, here's how:

Keeping the port closed when starting the wallet, open it after 5 mins or so. In couple hours, the connections shoot up.

what port number?

Judgment

newbie

Activity: 26

Merit: 0

Ok I'm seeing 21 active connections now on my wallet, here's how:

Keeping the port closed when starting the wallet, open it after 5 mins or so. In couple hours, the connections shoot up.

jgle

member

Activity: 85

Merit: 10

8 hours 3X280X 4CH 134 -ss 2 -t 5 -sd 1 so far found no piece of bad luck! Embarrassed

aistto

legendary

Activity: 1001

Merit: 1005

Quote from: Claymore on April 22, 2014, 03:50:17 AM

Quote from: aistto on April 22, 2014, 03:32:48 AM

readme says -ss 1 and 2 available
-ss 0 disalable for miner v3.0?

what about -t ? any advice to use it? (6 GPU on athlone x2 x250)

Try "-ss 2 -t 8" if your CPU is slow. It's a good idea to test different values and see changes in 4ch/h.

Thanks, but I want to know about ~~incriment~~ increment of -t

ozzy1926

sr. member

Activity: 378

Merit: 250

Quote from: Claymore on April 22, 2014, 03:50:17 AM

Quote from: aistto on April 22, 2014, 03:32:48 AM

readme says -ss 1 and 2 available
-ss 0 disalable for miner v3.0?

what about -t ? any advice to use it? (6 GPU on athlone x2 x250)

Try "-ss 2 -t 8" if your CPU is slow. It's a good idea to test different values and see changes in 4ch/h.

is there any guide to increase the wallet connection up from 8?

Topic: Claymore XPM GPU Miner discussion - page 37. (Read 142112 times)