hope that helps
i use xfx rx 470 and had numerous crashes with this version of Claymore, BUT after upgrading to 6.14 all Radeon cards seem to be working fine. For the last 8 hours at least.
I don't get more than 570s but at least system seems to be stable
Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 163. (Read 2145059 times)
polaris get fans bug , they run at max without reason , if you are on old driver , i mean like 16.9.2 , get 16.11.5 it get better stability and no fans bug !
lowdifficultyshare ? dont use option
i m with rx480 nitro+ 8go ... with 16.11.5 driver (1150c / 2150m) low power and miner runs for more of 30 hours now (win7)
lowdifficultyshare ? dont use option
Code:
-li
i m with rx480 nitro+ 8go ... with 16.11.5 driver (1150c / 2150m) low power and miner runs for more of 30 hours now (win7)
Why all uses this freak dwarfpool as was mentioned that this pool makes something wrong???
fyi:
https://s24.postimg.org/i4f6i93it/clay96_lowdiff.png
maybe fixed in the next version?
EDIT: also there's really weird behavior of the temps/fan speed display in EthMan - if I don't set -cclock to some value (not 0 for a single card is enough), there's no temp/fan data coming. probably has something to so with system path to amd drivers...
https://s24.postimg.org/i4f6i93it/clay96_lowdiff.png
maybe fixed in the next version?
EDIT: also there's really weird behavior of the temps/fan speed display in EthMan - if I don't set -cclock to some value (not 0 for a single card is enough), there's no temp/fan data coming. probably has something to so with system path to amd drivers...
I had the same problem today on two of four rigs :/ I have had to switch that rigs for Dwarfpool ZEC :/
take back from mem overclock
There's no mem overclock and the error itself is not the issue. The issue is disconnect/reconnect and it's not obvious to me that it should be on the pool side
Anyway I'm fine-tuning now and as each card is different may have some issues occasionally, but sometimes a single error can lead to a job timeout on dwarf and unsuccessful reconnect attempts for several minutes...
take back from mem overclock
fyi:
maybe fixed in the next version?
EDIT: also there's really weird behavior of the temps/fan speed display in EthMan - if I don't set -cclock to some value (not 0 for a single card is enough), there's no temp/fan data coming. probably has something to so with system path to amd drivers...
maybe fixed in the next version?
EDIT: also there's really weird behavior of the temps/fan speed display in EthMan - if I don't set -cclock to some value (not 0 for a single card is enough), there's no temp/fan data coming. probably has something to so with system path to amd drivers...
What hashrate on r9 390's and v9.6? 
what is wrong in my code?
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8005 -u 4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWBjZiJTcVxE7DJjTmE -p x
cannot connect I get
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlogin"}}
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8005 -u 4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWBjZiJTcVxE7DJjTmE -p x
cannot connect I get
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlogin"}}
There is nothing wrong with your code, but dwarf does not support those XMR addresses. I sent an email to support and I'm waiting for their answer.
Ah is it again a kraken adress ?
what is wrong in my code?
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8005 -u 4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWBjZiJTcVxE7DJjTmE -p x
cannot connect I get
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlogin"}}
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8005 -u 4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWBjZiJTcVxE7DJjTmE -p x
cannot connect I get
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlogin"}}
There is nothing wrong with your code, but dwarf does not support those XMR addresses. I sent an email to support and I'm waiting for their answer.
I think Claymore is sorting the stratum username mess out soon in the next update:
Please allow workernames as username, not only wallet addresses
bumping this once more
Ok I will release new version in 2-4 days, I will update many things.
what is wrong in my code?
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8005 -u 4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWBjZiJTcVxE7DJjTmE -p x
cannot connect I get
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlogin"}}
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8005 -u 4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWBjZiJTcVxE7DJjTmE -p x
cannot connect I get
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlogin"}}
There is nothing wrong with your code, but dwarf does not support those XMR addresses. I sent an email to support and I'm waiting for their answer.
what is wrong in my code?
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8005 -u 4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWBjZiJTcVxE7DJjTmE -p x
cannot connect I get
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlogin"}}
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8005 -u 4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWBjZiJTcVxE7DJjTmE -p x
cannot connect I get
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlogin"}}
if you mine to an exchange, you need to put as adress
WALLET.PAYMENTID
and not WALLET alone.
what is wrong in my code?
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8005 -u 4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWBjZiJTcVxE7DJjTmE -p x
cannot connect I get
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlogin"}}
NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8005 -u 4GdoN7NCTi8a5gZug7PrwZNKjvHFmKeV11L6pNJPgj5QNEHsN6eeX3DaAQFwZ1ufD4LYCZKArktt113 W7QjWvQ7CWBjZiJTcVxE7DJjTmE -p x
cannot connect I get
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlogin"}}
How undervolt card with watt tool for -100 MV I can not understand how I can used it for undervolt
Just use the latest AMD Crimson drivers. You can change the voltage of AMD 2xx, AMD 4xx etc. in AMD Radean Settings.
Just FYI:
'Today Kraken is launching support for trading Monero (XMR)... to deposit your XMR go to Funding > Deposit > XMR and generate a deposit address. Then send your XMR deposit to this deposit address. 15 confirmations are required before the funds are available in your account balance for trading. Kraken utilizes integrated addresses which have the payment ID embedded in the address, so you don’t need to specify a separate payment ID for your deposit.'
'Today Kraken is launching support for trading Monero (XMR)... to deposit your XMR go to Funding > Deposit > XMR and generate a deposit address. Then send your XMR deposit to this deposit address. 15 confirmations are required before the funds are available in your account balance for trading. Kraken utilizes integrated addresses which have the payment ID embedded in the address, so you don’t need to specify a separate payment ID for your deposit.'
These are great news but I can't connect to dwarf's using a Kraken address
Any ideas?
They probably need to add to the pool software a compatibility to take in account that kraken merge the wallet & payment ID.
Just FYI:
'Today Kraken is launching support for trading Monero (XMR)... to deposit your XMR go to Funding > Deposit > XMR and generate a deposit address. Then send your XMR deposit to this deposit address. 15 confirmations are required before the funds are available in your account balance for trading. Kraken utilizes integrated addresses which have the payment ID embedded in the address, so you don’t need to specify a separate payment ID for your deposit.'
'Today Kraken is launching support for trading Monero (XMR)... to deposit your XMR go to Funding > Deposit > XMR and generate a deposit address. Then send your XMR deposit to this deposit address. 15 confirmations are required before the funds are available in your account balance for trading. Kraken utilizes integrated addresses which have the payment ID embedded in the address, so you don’t need to specify a separate payment ID for your deposit.'
These are great news but I can't connect to dwarf's using a Kraken address
Any ideas?
I actually never tried that myself, not mining to exchange. But yes, can confirm, doesn't connect.
Tried with nvidia/amd , ccminer/ claymore/ wolf0, dwarf/ minexmr/ crypto-pool and none of those combinations connect.
Deposit from wallet without payment id confirmed working though.
Well, after initial good results on both my rigs with 9.6, I now have problems with both. Woke up this morning to rig #2 (6x RX 470s) crashed and all fans blasting. This happened the night before with core/clock settings of 1200/1950, so I had lowered it to 1200/1920. It ran all day fine then just a few minutes ago, I check it and I had the same "Open CL hung in thread 10 & 11" issue that had occurred the night before. Now I have it set at default 1242/1900, so we will see how that goes.
On Rig #1 that had been running 4x rx 470s for over 4 days straight at 1242/1900, it just experienced that sporadic fan blasting issue that others have encountered. So, I had to reboot and reset that one as well.
Bottom line, there definitely appear to be stability issues with the 4xx series cards, so hopefully this is something that can be addressed in the forthcoming v10.
I know this belongs on the CPU thread but I have also seen weird things going on with Claymore CPU XMR Miner 3.5. I have 3 K series i7's mining it and on 2 of my 3 PCs, the hash-rate has inexplicably dropped by about 10-15%. This is after restarting and rebooting several times and there is nothing else running CPU wise, yet for some reason it's not as effective.
Really looking forward to the GPU miner update. Thanks in advance Claymore!
On Rig #1 that had been running 4x rx 470s for over 4 days straight at 1242/1900, it just experienced that sporadic fan blasting issue that others have encountered. So, I had to reboot and reset that one as well.
Bottom line, there definitely appear to be stability issues with the 4xx series cards, so hopefully this is something that can be addressed in the forthcoming v10.
I know this belongs on the CPU thread but I have also seen weird things going on with Claymore CPU XMR Miner 3.5. I have 3 K series i7's mining it and on 2 of my 3 PCs, the hash-rate has inexplicably dropped by about 10-15%. This is after restarting and rebooting several times and there is nothing else running CPU wise, yet for some reason it's not as effective.
Really looking forward to the GPU miner update. Thanks in advance Claymore!
So... both rigs ran fine overnight with the 1242/1900 settings, but then this morning, rig #2 crashes and reboots again. Same settings, same cards, generally same setup, but rig 2 is just unstable. Got it running again but now I am getting sporadic "low difficulty shares". Does anyone know what the main causes of these are? Also, what problems do they cause? I've heard of people getting banned from dwarf for too many of these so I don't want that to happen, but don't know what to do to fix it either. Right now at least it I've only seen 2 in about 25 minutes of running but not sure what "too many" is either.
Just FYI:
'Today Kraken is launching support for trading Monero (XMR)... to deposit your XMR go to Funding > Deposit > XMR and generate a deposit address. Then send your XMR deposit to this deposit address. 15 confirmations are required before the funds are available in your account balance for trading. Kraken utilizes integrated addresses which have the payment ID embedded in the address, so you don’t need to specify a separate payment ID for your deposit.'
'Today Kraken is launching support for trading Monero (XMR)... to deposit your XMR go to Funding > Deposit > XMR and generate a deposit address. Then send your XMR deposit to this deposit address. 15 confirmations are required before the funds are available in your account balance for trading. Kraken utilizes integrated addresses which have the payment ID embedded in the address, so you don’t need to specify a separate payment ID for your deposit.'
These are great news but I can't connect to dwarf's using a Kraken address
Any ideas?
Hi
I have 4 rigs that work perfectly with Zcash (Claymore miner 9.2 no crashes whatsoever until now)
1) 7 x R7 370 ; windows 10 ; Crimson 15.12
2) 7 x R7 370 ; windows 10 ; Crimson 15.12
3) 2 x Rx480 + 4 R9 380 ; Crimson 16.9.2
4) 6 x Rx480 ; Crimson 16.9.2
Monero is quite profitable at the moment, Rigs 1 and 2 worked perfectly with monero miner 9.6.
However recurrent crashes occur with rigs 3 and 4. Sometimes after 15min, sometimes after a few hours.
I have no clue of whatever is wrong !
Maybe Crimson 16.9.2 is not what I need for monero miner??
Help.
I have 4 rigs that work perfectly with Zcash (Claymore miner 9.2 no crashes whatsoever until now)
1) 7 x R7 370 ; windows 10 ; Crimson 15.12
2) 7 x R7 370 ; windows 10 ; Crimson 15.12
3) 2 x Rx480 + 4 R9 380 ; Crimson 16.9.2
4) 6 x Rx480 ; Crimson 16.9.2
Monero is quite profitable at the moment, Rigs 1 and 2 worked perfectly with monero miner 9.6.
However recurrent crashes occur with rigs 3 and 4. Sometimes after 15min, sometimes after a few hours.
I have no clue of whatever is wrong !
Maybe Crimson 16.9.2 is not what I need for monero miner??
Help.
We are waiting for new miners, but generally pass on 9. 5 and you will have happiness!
Meantime Claymore's v9.6 6x sapphire 480 nitro+ 4GB default clocks mining without any problem for last 26h with constant speed 4480 H/s
What driver version do you use for your Rx 480 ?
Thanks.
Jump to: