Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 175. (Read 2145059 times)

hi guys,

I am just starting to mine monero.  what is the best pool to point to?

thanks

280x with a modified Bios mining with 470 h/s Default, not overclock
and another 280h with modified Bios digs with 620 h/s Defoult, not overclock
with identical Miner are ( Claymore CryptoNote GPU Miner  v9.6 Beta)
Why is that?

Hi all!

Any idea which one i should use if i have few rigs?

and can some one explain the difference

Stratum-port:8005 start diff: 10000 for GPU, CPU
Stratum-port: 8050 start diff: 10000 for GPU, CPU
Stratum-port: 8100 start diff: 10000 for high-end CPU and GPU-Rigs

Stratum-port: 9050 fixed diff: 10000
Stratum-port: 9100 fixed diff: 10000
Stratum-port: 9500 fixed diff: 10000


Thank you

On half of my machines i got this error from time to time:



Mining in Nicehash, any ideas?

 Too much OC gives you this error. Try reduce it.

how I will see the total hashing speed of 5 cards at programm???

also the miner connect automatic 5 cards
or  must write something?

Try change port to 8050 or 8100

Hi Claymore, very good job w/ all yours miners.. 

Guys Please help with RX 480 o/c in Claymore CryptoNote GPU Miner v9.6 Beta - POOL in Windows 10

I get this error:
12/27/16-11:46:55 - SHARE FOUND (target 10000) - (GPU 0 of 1)
12/27/16-11:46:58 - New job received from xmr-usa.dwarfpool.com:9050
Speed: 792 h/s, TotalHashes: 174K, DevHashes: 3K Mining time: 00:03
12/27/16-11:47:08 - SHARE FOUND (target 10000) - (GPU 0 of 1)
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
Stratum - connecting to 'xmr-usa.dwarfpool.com' <198.50.156.114> port 9050
Stratum - Connected
Pool Diff 10000
12/27/16-11:47:23 - SHARE FOUND (target 10000) - (GPU 0 of 1)
12/27/16-11:47:23 - SHARE FOUND (target 10000) - (GPU 0 of 1)
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}

many times..

I tried h 1024 and other, and tried -a 1, -a 4 and nothing
I tried other pool port in dwarf like 8050, 9100, 8800, and nothing
I tried moneropool wich have diff 25000.1 and nothing

ALL specs: Claymore CryptoNote GPU Miner  v9.6 Beta           

Cards available: 1
GPU #0: name: Ellesmere, 8192 MB available, 36 units
Total cards: 1

Catalyst 15.x is REQUIRED for best performance and compatibility
At least 16 GB of Virtual Memory is required for multi-GPU systems ---> IS ON
Make sure you defined GPU_MAX_ALLOC_PERCENT 100 ---> IS ON
Be careful with overclocking, use default clocks for first tests
Initializing...

GPU #0 recognized as RX480
GPU #0: HashCnt = 1024
POOL version
GPU #0: -a 4 mode selected
2 pools specified.
Remote monitoring is enabled on port 3333
Press "m" key for tune mode.
Stratum - connecting to 'xmr-usa.dwarfpool.com' <192.95.39.128> port 9050
Stratum - connecting to 'xmr-usa.dwarfpool.com' <192.95.39.128> port 9050
Stratum - Connected
Stratum - Connected
Pool Diff 10000
DevFee: Pool Diff 10000

Thanks for all

Oswaldo

well probably if wanted to share his knowledge he would already do it.
So you got your answer, he did not only copy lower strap times to higher freq, he modified them.

I still do not get what does custom mean here. Sry to ask but is it gonna be a secret? Or can anyone do this?

No. It's custom!

I think it must be 1500 memory strap copied in other higher timings right? is that all the changes you made?

i can haz 750-760khs on nitro 470/8gb

I could only add that it happens also mining with Claymore ZEC miner, Win 7 x64, Crimson 16.9.1. But pattern is here: Sapphire reference RX470 4GB. I was blaming till now USB riser, ordered and received new riser, but was lazy enough not to troubleshoot (exchanging cable first, than riser) because it happens only once per week or two. Card is mining, only fan is going into 100% madness.

not observed such necessity with amd cards so far on win10 v1607 , stays nicely on drivers im installing , driver update is disabled in CP tho.

I don't know about you, but I've had trouble with windows 10 auto-updating my drivers for my nvidia card, which pulls them out of compatibility (gtx on windows 10 needs drivers that are over a year old to function properly). Could eventually end up being the same issue with using older amd drivers.

If you run into this problem, try using group policy editor (windows 10 pro only). There are guides online to show how to enable a policy that prevents windows from installing a new driver for any hardware that matches the hardware IDs that you specify.

http://www.howtogeek.com/263851/how-to-prevent-windows-from-automatically-updating-specific-drivers/

It should be the drivers. I just noticed that one of my rigs has no problems and it is with 16.11.4 drivers instead of 16.9.2
So now I am switching the drivers of the problematic rigs...

so far runs ok on win10 with 16.10.3 , testing Claymore , not tried Wolf0s or Sgminer yet
p.s. it had 1 short 100% spike , but fan returned to normal state not crashed to 0% speed like with old driver.

Trying your suggestion now of using non-whql 16.10.3 drivers. Still no fan issues with this driver on your end, mo35?

If this doesn't work out, I might swap this card out for an MSI, since I still have a few days left in the return window. Any reports of this same issue for a 480 from another vendor?

yeah mine is sapphire 480 nitro+ 8gb too , with latest afterburner