Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 179. (Read 2145041 times)
ah ok... sounds like default -h of 1024 is the way to go then. and 735 for a modded 480 seems about right compared to the 690 i got from my modded 470... in the ballpark at least. What I can't figure out is how 800 is possible on a 470 as Wolf mentioned in this or another thread. But I dont remember seeing anyone else claiming anywhere close to that high so who knows. Will be interesting to see what kind of bump the 4xx series gets from Claymore's next rev of this miner. Unfortunately, I think it will be delayed a bit as he mentioned on the ZEC thread that he finally caved and will be doing a linux miner for ZEC after all. Not sure why the demand to ZEC miners is still so high given that both XMR and ETH are currently considerably more profitable to mine. I guess a lot of people still hoping ZEC prices will go through the roof.
5 x RX480:
XMR: GPU0 788 h/s, GPU1 783 h/s, GPU2 791 h/s, GPU3 786 h/s, GPU4 789 h/s
XMR: GPU0 788 h/s, GPU1 783 h/s, GPU2 791 h/s, GPU3 786 h/s, GPU4 789 h/s
Can you please share your clock settings ; bios mod details, power draw?
Thank you
Yes, I would appreciate that as well. In addition, would you mind sharing your "-a" and "-h" settings within Claymore .bat file? Since he made this before the 470/480's came out, they are not mentioned anywhere in the readme file. I think that -a 2 is probably best but anything I do with the -h value seems to reduce the hash-rate of my 470's. I assume that -h value will at least be similar for 480s and 470s.
For my rx480 I am finding that default -h of 1024 and -a 4 works the best ! Surprising that -a 4 is working better than -a 2
In addition, would you mind sharing your "-a" and "-h" settings within Claymore .bat file?
In my case (RX 480) these parameters does not play any role. Modded card has 735 H/s with default -a and -h
Has anyone using MoneroPool.com seen any productivity issues the last few days? I was going along fine at pretty close to their own profit calculator as well as the major external ones, then about 3 days ago it dropped dramatically. For instance, my last 2 payouts of .5 XMR took 30 hours each (.4 XMR/day). My previous 5 payouts were averaging .67 XMR/day, which is very close to the calculators but now it has dropped almost 40%. Yes, I understand that difficulty went up a bit the last few days but now it has actually dropped back down again. Has anyone else had this issue on this pool? I'm highly considering trying dwarfoool since this really seems to be a pool issue.
Does anyone have hash rate and power consumption numbers for R9 380 4GB cards for XMR using this miner (ballpark)? I 380 cards a decent choice for mining XMR?
606 with 1070/1600 and modded BIOS, not sure on power consumption though
5 x RX480:
XMR: GPU0 788 h/s, GPU1 783 h/s, GPU2 791 h/s, GPU3 786 h/s, GPU4 789 h/s
XMR: GPU0 788 h/s, GPU1 783 h/s, GPU2 791 h/s, GPU3 786 h/s, GPU4 789 h/s
Can you please share your clock settings ; bios mod details, power draw?
Thank you
Yes, I would appreciate that as well. In addition, would you mind sharing your "-a" and "-h" settings within Claymore .bat file? Since he made this before the 470/480's came out, they are not mentioned anywhere in the readme file. I think that -a 2 is probably best but anything I do with the -h value seems to reduce the hash-rate of my 470's. I assume that -h value will at least be similar for 480s and 470s.
5 x RX480:
XMR: GPU0 788 h/s, GPU1 783 h/s, GPU2 791 h/s, GPU3 786 h/s, GPU4 789 h/s
XMR: GPU0 788 h/s, GPU1 783 h/s, GPU2 791 h/s, GPU3 786 h/s, GPU4 789 h/s
Can you please share your clock settings ; bios mod details, power draw?
Thank you
Why this miner is working for dev most of time?
Quote from: pehoko on December 20, 2016, 08:12:56 PMWhy this miner is working for dev most of time?
I haven't saw "nofee" option ... all good now.
This question has been answered before. The difficulty level of the dev fee is lower so there's more accepted shares, but they are worth less.
The difficulty of your own shares is higher, so they are worth more, so you get paid more but you need to have less accepted shares.
Hotmetal is absolutely correct. Just watching the miner results window can be deceiving so ignore that. If you read the readme file, you will see that enabling the nofee option will reduce your speed by 5%, so what you have done is not only cut Claymore out of the fee he deserves and you are netting 2.5% less overall, so a lose-lose situation.
Does anyone have hash rate and power consumption numbers for R9 380 4GB cards for XMR using this miner (ballpark)? I 380 cards a decent choice for mining XMR?
@Claymore
If you make a new version is it possible to include reboot.bat under -r option?
thank you.
If you make a new version is it possible to include reboot.bat under -r option?
thank you.
Can someone tell how much a 7950 and 280X hash with the latest version?
Thanks.
Thanks.
550-598 for 280x at 1000/1500 undervolted to 1094, likely depends on memory type
572 for 7950 at 1080/1500 undervolted to 1125 (Black Edition, Elpida)
all with modded ROMs as described in the modded BIOS thread: https://bitcointalksearch.org/topic/hacked-modified-memory-strap-bios-database-for-zec-mining-1676474
Why this miner is working for dev most of time?
This question has been answered before. The difficulty level of the dev fee is lower so there's more accepted shares, but they are worth less.
The difficulty of your own shares is higher, so they are worth more, so you get paid more but you need to have less accepted shares.
Why this miner is working for dev most of time?
I haven't saw "nofee" option ... all good now.
5 x RX480:
XMR: GPU0 788 h/s, GPU1 783 h/s, GPU2 791 h/s, GPU3 786 h/s, GPU4 789 h/s
XMR: GPU0 788 h/s, GPU1 783 h/s, GPU2 791 h/s, GPU3 786 h/s, GPU4 789 h/s
Can someone tell how much a 7950 and 280X hash with the latest version?
Thanks.
Thanks.
what hashing speed of each 480 card for monero?
735 H/s746 H/s 1300/2100 - stable. If higher frequency memory - disconnect. Power consumption does not interest)) 130 in General, 130 watt card))
Im too chicken to mod my FXF rx480 referenced. what is your power usage?
Modding reference is so simple - just download one of the roms.
6x cards mining ETH 176MH/s gave 930W from the wall
what hashing speed of each 480 card for monero?
735 H/s
Can't you share your set up? I used stock set up, only got 640~ ea
Card: RX 480 Nitro+
I'm using custom mod made for effective ETH mining. It has 1150/2150 Hz settings.
Im too chicken to mod my FXF rx480 referenced. what is your power usage?
what hashing speed of each 480 card for monero?
735 H/s
Can't you share your set up? I used stock set up, only got 640~ ea
Card: RX 480 Nitro+
I'm using custom mod made for effective ETH mining. It has 1150/2150 Hz settings.
what hashing speed of each 480 card for monero?
735 H/s
Can't you share your set up? I used stock set up, only got 640~ ea
Jump to: