Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 188. (Read 2145059 times)

Claymore, what would it take to get support for Bipcoin (BIP) addresses?

https://bitcointalksearch.org/topic/moved-bipcoin-mineable-cryptonote-bipcot-nogov-licensed-1662140

None of my GPU cards will fit into it due to the 1x slot's back end stopper, so may it be cut out so the 16x card will fit into the slot?

On of my friends use server psu to power GPUs.. 2000 or 2500W it has
USB 3.0 PCIe 1 to 3 Converter Card little cheaper is here: https://www.fasttech.com/products/1/10021847/4736200-usb-3-0-pcie-1-to-3-converter-card

1600w 80+ Plantinum:  https://smile.amazon.com/dp/B00R33ZBQU/  
or, get 2nd PSU then short green to black:  https://smile.amazon.com/gp/product/B01C7Q4MJY/  

https://www.aliexpress.com/item/PCI-e-Express-1X-to-3-Port-1X-Switch-Multiplier-HUB-Riser-Card-USB-Cable-Drop/32688639286.html

Windows can go up to 7 x GPUs, Linux can go up to 8 x GPUs. Can go higher with registry hacks and drivers, I was told.

This is on my test rig - I don't think I will use this for production use because you can only use low power GPUs like 370s if you want to setup multi-GPU rig and you have to use a big PSU.

What 3-to-1 PCI multi-plex card do you use citronick ?

I have one rig that has 7 x R7-370s, using standard H81 BTC Pro mobo and 3-to-1 PCI multi-plex card.

It started as an experiment but I ended up keeping it as a one of my test systems for EthOS and also Claymore.

R7-370 runs only about 14.5Mhs per card and its not a fast card, however its very cool and not power hungry. So this is good card for this rig. In order to use higher end cards for 7/8 GPU rig, prepare to tinker on multi PSU setups.

In conclusion, I will never do multi GPU rig like this again because, it requires expensive 1600w PSU, larger than usual open cage rig, plenty of USB risers and many hours of tickering, only Linux/Ubuntu can drive more than 8 x GPUs - higher learning curve because you need to install AMD drivers separately in Ubuntu 16.04, for Windows... I think limited to 7-8 or more GPUs and requires special hacks.

To consider a 8 or more x PCI slot mobo and PCI expansion sub-board; similar to deep learning multi GPU computers... for mining, its not worth it - it will be too expensive.

The 7 PCIE slot motherboard are the high end ones. They are much more expensive. Not worth the mining.

very nice! i love that 4-5U expansion case! but 3600+ $ US is so expensive.

a motherboard I got but wasn't aware of a detail which makes my solution not viable for now, is the msi krait gaming 3x z170a board. it's got 3 x16/x8 slots with 4 x1. the problem at the moment are the skylake cpus, they only have 16 pcie lanes. so hopefully intel releases better skylake processor. All that to say only 4 RX 480 works on my current board, when i add a 5th i get an error message stating there isn't enough free resources code 12.

otherwise i would suggest the Asus X99-E WS/USB 3.1 , it's got 7 x16/x8 slots. I'm looking at this one, because i got some Xeon processors at home.
and i use pcie risers with usb3 cables

Any, plus  
http://cyclone.com/products/expansion_systems/600-2710.php  
($3600 internals; $4600 complete case+pws) plus      
https://smile.amazon.com/gp/product/B01CEKN5VO/  

What is a good 7 GPU motherboard?  And case with enough space for air intake between the graphics cards?

Which motherboard and CPU will you use for 8 cards?
i know for 7 but didn't find any possibilities for 8+

Tested GTX 1080 Founders Ed. with everything overclocked (with MSI Afterburner) to maximum possible without errors and it tops out at 451 h/s with average ~425 h/s (with ccminer); 'also elevate priority of miner task to ABOVENORMAL to mitigate intermittent slowing from Windows system background tasks that run at NORMAL priority, such as the TiWorker update task.  'anxiously await Linux Claymore so we can run eight AMD GPUs instead of the Windows max. of six.

hello
i m testing the miner but i getting error, and  disconnected ?

i tried on 2 pool


C:\cgminer_skein\Claymore CryptoNote>"C:\cgminer_skein\Claymore CryptoNote\NsGpu
CNMiner.exe" -o stratum+tcp://xci.acidminer.org:3003 -u 1G8X27mhjoqASRkK2pELYCVf
twqXYjRJo7LDCdoWgsD96otte77vbfBSVpuwcpDERyM2pPbt8BixxDQ4siw1bXzX4T13L5y -p x
Main pool is xci.acidminer.org

╔════════════════════════════════════════════════════════════════╗
║            Claymore CryptoNote GPU Miner  v9.6 Beta            ║
╚════════════════════════════════════════════════════════════════╝

Cards available: 1
GPU #0: name: Ellesmere, 4096 MB available, 32 units
Total cards: 1

Catalyst 15.x is REQUIRED for best performance and compatibility
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Initializing...

GPU #0: HashCnt = 1024
POOL version
GPU #0: -a 1 mode selected
1 pool specified.
Remote monitoring is enabled on port 3333
Press "m" key for tune mode.
Stratum - connecting to 'xci.acidminer.org' <84.39.97.125> port 3003
Stratum - connecting to 'xci.acidminer.org' <84.39.97.125> port 3003
Stratum - Connected
Stratum - Connected
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlog
in"}}
Pool Diff 10000
10/23/16-00:14:09 - New job received from xci.acidminer.org:3003
Speed: 261 h/s, TotalHashes: 1K, DevHashes: 0K Mining time: 00:00
10/23/16-00:14:23 - SHARE FOUND (target 10000) - (GPU 0 of 1)
10/23/16-00:14:25 - SHARE FOUND (target 10000) - (GPU 0 of 1)
10/23/16-00:14:29 - New job received from xci.acidminer.org:3003
Speed: 565 h/s, TotalHashes: 13K, DevHashes: 0K Mining time: 00:00
Job timeout, disconnect, retry in 20 sec...
10/23/16-00:14:38 - SHARE FOUND (target 20000) - (GPU 0 of 1)
10/23/16-00:14:42 - New job received from xci.acidminer.org:3003
Speed: 550 h/s, TotalHashes: 19K, DevHashes: 0K Mining time: 00:00
Stratum - connecting to 'xci.acidminer.org' <84.39.97.125> port 3003
Stratum - Connected
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlog
in"}}
10/23/16-00:14:59 - New job received from xci.acidminer.org:3003
Speed: 570 h/s, TotalHashes: 30K, DevHashes: 0K Mining time: 00:00
10/23/16-00:15:22 - New job received from xci.acidminer.org:3003
Speed: 569 h/s, TotalHashes: 43K, DevHashes: 0K Mining time: 00:01
Job timeout, disconnect, retry in 20 sec...
10/23/16-00:15:39 - New job received from xci.acidminer.org:3003
Stratum - connecting to 'xci.acidminer.org' <84.39.97.125> port 3003
Speed: 569 h/s, TotalHashes: 55K, DevHashes: 0K Mining time: 00:01
Stratum - Connected
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlog
in"}}
Job timeout, disconnect, retry in 20 sec...
Stratum - connecting to 'xci.acidminer.org' <84.39.97.125> port 3003
Stratum - Connected
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlog
in"}}
10/23/16-00:16:59 - New job received from xci.acidminer.org:3003
Speed: 573 h/s, TotalHashes: 97K, DevHashes: 0K Mining time: 00:02
Job timeout, disconnect, retry in 20 sec...

*****************

C:\cgminer_skein\Claymore CryptoNote>setx GPU_MAX_ALLOC_PERCENT 100

RÉUSSITE : la valeur spécifiée a été enregistrée.

C:\cgminer_skein\Claymore CryptoNote>"C:\cgminer_skein\Claymore CryptoNote\NsGpu
CNMiner.exe" -o stratum+tcp://gorillapool.org:7777 -u 1G8X27mhjoqASRkK2pELYCVftw
qXYjRJo7LDCdoWgsD96otte77vbfBSVpuwcpDERyM2pPbt8BixxDQ4siw1bXzX4T13L5y -p x
Main pool is gorillapool.org

╔════════════════════════════════════════════════════════════════╗
║            Claymore CryptoNote GPU Miner  v9.6 Beta            ║
╚════════════════════════════════════════════════════════════════╝

Cards available: 1
GPU #0: name: Ellesmere, 4096 MB available, 32 units
Total cards: 1

Catalyst 15.x is REQUIRED for best performance and compatibility
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Initializing...

GPU #0: HashCnt = 1024
POOL version
GPU #0: -a 1 mode selected
1 pool specified.
Remote monitoring is enabled on port 3333
Press "m" key for tune mode.
Stratum - connecting to 'gorillapool.org' <146.185.145.175> port 7777
Stratum - connecting to 'gorillapool.org' <146.185.145.175> port 7777
Stratum - Connected
Stratum - Connected
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlog
in"}}
Pool Diff 25000.1
10/23/16-00:20:46 - SHARE FOUND (target 25000) - (GPU 0 of 1)
Job timeout, disconnect, retry in 20 sec...
10/23/16-00:21:11 - SHARE FOUND (target 25000) - (GPU 0 of 1)
10/23/16-00:21:15 - New job received from gorillapool.org:7777
Speed: 564 h/s, TotalHashes: 20K, DevHashes: 0K Mining time: 00:00
10/23/16-00:21:25 - New job received from gorillapool.org:7777
Speed: 555 h/s, TotalHashes: 25K, DevHashes: 0K Mining time: 00:00
Stratum - connecting to 'gorillapool.org' <146.185.145.175> port 7777
Stratum - Connected
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlog
in"}}

Same here, at least for  some rigs of three people, willing to start mining XMR, with Linux and...cuda, so Nvidea, thinking GTX1080..

Close to 780h/s!


I'm getting this errors alot on both CPU & GPU.

someone may indicate an ideal hascount for the RX 470 8gb. (I'm using a Shapire RX 470 8gb Nitro)?

I get this error a lot, any ideas on how to fix it?

08:02:46:259   1b2c   GPU 0: HashCnt = 864, time = 1635 ms, hashrate = 528 h/s
08:02:46:259   1b2c   Round
08:02:47:041   ec4   10/19/16-08:02:42 - SHARE FOUND (target 4862) - (GPU 0 of 1)
08:02:47:244   ec4   got 63 bytes
08:02:47:244   ec4   buf: {"jsonrpc":"2.0","result":{"status":"OK"},"id":1,"error":null}

08:02:47:244   ec4   parse packet: 63
08:02:47:244   ec4   Share accepted
08:02:47:244   ec4   new buf size: 0
08:02:47:931   1ef4   GPU 0: HashCnt = 864, time = 1642 ms, hashrate = 526 h/s


Gigabyte R9 390
i7 4790K
16 Gbyte of ram
Windows 10 pro
Crimson 16.9.2 driver


Getting 509 H/s now with Claymore, another 150 H/s from the CPU via Minergate, is this all I can get out of it?
How can I fix the error stated above?

I'm new at this but trying hard to learn

Thanks

Yes I get 810h/s on 290x hynix in Windows 7 and Catalyst 15.12.

helllo , i think im getting very bad score .. what is happening ?

290X - hynix - 1150 / 1400  780h/s  XMR

even at stock same score or so .

you claim that hynix memory get 810 score :/

https://i.imgur.com/TwBaXqn.png

I think you mistakenly posted this in Claymore's Cryptonote thread.... you may want to post CDM questions at https://bitcointalksearch.org/topic/m.14501372