Hey Claymore,
can you integrate usernames instead of only allowing -u WALLET ?
I've got a pool up:
https://xmr.suprnova.cc
and people would like to mine with your miner, but it seems it doesn't support -u suprnova.1 for example
Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 190. (Read 2145041 times)
Hello,
Will there be a solo version of mining CryptoNote GPU Miner?
I know that it works with a pool-software. I would like e.g. node-crypto note-pool install, but this is too complicated.
Will there be a solo version of mining CryptoNote GPU Miner?
I know that it works with a pool-software. I would like e.g. node-crypto note-pool install, but this is too complicated.
Hi! How can I use this miner to mine on a pool which requires user id and pass to connect? When i set "-u user.id -p pass" the miner shows error invalid address. Thanks for the great miner and keep up the good work!
Can you share details on which pool you are mining ? It would make it easire to assist that way. Or you could switch to more "simple" pool like moneropool.com and
use -u yourXMRwallet -p x
Im having the same issue
its krb.suprnova.cc
Its standard the standard cryptonote algo but cant get it to mine this specific currency either by using the wallet address and a 'simpler' pool, or by username password at suprnova. Any help would be appreciated.
i registered there and tried it out. it seams that the miner rejects anything that isnt "valid" address of supported coins. The only logical thing would be to register account using supported
coin address as a name, but they dont allow such long usernames on your pool.. I'll try to find a workaround for this , but the best option would be to ask op to add support for it. Some1 correct me if im wrong.
cheers
I would like a flag to by-pass the address check. for instance if you want to mine thru mining rig rentals, user has to be the rig name. here is the result of an MRR call:
Code:
07:19:01:709 d10
07:19:01:709 d10 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
07:19:01:709 d10 º Claymore CryptoNote GPU Miner v9.3 Beta º
07:19:01:709 d10 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
07:19:01:909 d10 Wrong wallet address jimbit.32939 - XMR/QCN/BCN/FCN/Aeon/Duck/Dash/OEC/MCN/ORION addresses are supported only.
07:19:01:909 d10 Pool us-east01.miningrigrentals.com removed from the list
07:19:01:909 d10 Wrong wallet address jimbit.32939 - XMR/QCN/BCN/FCN/Aeon/Duck/Dash/OEC/MCN/ORION addresses are supported only.
07:19:01:909 d10 Pool monerohash.com removed from the list
07:19:01:909 d10 No pools specified! Specify at least one pool in "pools.txt" file or in "-o" parameter.
07:19:01:709 d10 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
07:19:01:709 d10 º Claymore CryptoNote GPU Miner v9.3 Beta º
07:19:01:709 d10 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
07:19:01:909 d10 Wrong wallet address jimbit.32939 - XMR/QCN/BCN/FCN/Aeon/Duck/Dash/OEC/MCN/ORION addresses are supported only.
07:19:01:909 d10 Pool us-east01.miningrigrentals.com removed from the list
07:19:01:909 d10 Wrong wallet address jimbit.32939 - XMR/QCN/BCN/FCN/Aeon/Duck/Dash/OEC/MCN/ORION addresses are supported only.
07:19:01:909 d10 Pool monerohash.com removed from the list
07:19:01:909 d10 No pools specified! Specify at least one pool in "pools.txt" file or in "-o" parameter.
claymore please release a version that will bypass the address check.
jimbit
Best value -h for 390? With auto selection i was getting 840 h/s -h 1280.
press "m" key while mining,select card (0,1..etc) and use "+" and "-" to change -h "on the fly" - thats the fastest way to determine what -h value is best for individual
cases,because you can see it reflecting on your mining speed in real time.
cheers
Best value -h for 390? With auto selection i was getting 840 h/s -h 1280.
Please release an updated Linux version Sir Claymore! We will make you rich with moar hash power!
Hi! How can I use this miner to mine on a pool which requires user id and pass to connect? When i set "-u user.id -p pass" the miner shows error invalid address. Thanks for the great miner and keep up the good work!
Can you share details on which pool you are mining ? It would make it easire to assist that way. Or you could switch to more "simple" pool like moneropool.com and
use -u yourXMRwallet -p x
Im having the same issue
its krb.suprnova.cc
Its standard the standard cryptonote algo but cant get it to mine this specific currency either by using the wallet address and a 'simpler' pool, or by username password at suprnova. Any help would be appreciated.
i registered there and tried it out. it seams that the miner rejects anything that isnt "valid" address of supported coins. The only logical thing would be to register account using supported
coin address as a name, but they dont allow such long usernames on your pool.. I'll try to find a workaround for this , but the best option would be to ask op to add support for it. Some1 correct me if im wrong.
cheers
Hi! How can I use this miner to mine on a pool which requires user id and pass to connect? When i set "-u user.id -p pass" the miner shows error invalid address. Thanks for the great miner and keep up the good work!
Can you share details on which pool you are mining ? It would make it easire to assist that way. Or you could switch to more "simple" pool like moneropool.com and
use -u yourXMRwallet -p x
Im having the same issue
its krb.suprnova.cc
Its standard the standard cryptonote algo but cant get it to mine this specific currency either by using the wallet address and a 'simpler' pool, or by username password at suprnova. Any help would be appreciated.
Hi! How can I use this miner to mine on a pool which requires user id and pass to connect? When i set "-u user.id -p pass" the miner shows error invalid address. Thanks for the great miner and keep up the good work!
Can you share details on which pool you are mining ? It would make it easire to assist that way. Or you could switch to more "simple" pool like moneropool.com and
use -u yourXMRwallet -p x
Hi! How can I use this miner to mine on a pool which requires user id and pass to connect? When i set "-u user.id -p pass" the miner shows error invalid address. Thanks for the great miner and keep up the good work!
Claymore could you make something like "GPU-reordering" command, so that the GPU number in miner and in GPU-Z are synchronized? Both for ETH and XMR miner.
Use "-di" option for that, see readme for Dual miner for detailed explanations.
Claymore could you make something like "GPU-reordering" command, so that the GPU number in miner and in GPU-Z are synchronized? Both for ETH and XMR miner.
.
RADEON RX 470 4GB connected via "Razer Core" eGPU (USB3.1c/Thunderbolt3/40Gbps) produces 550 h/s.
Is there anything I can do, other than OC, to increase h/s in Windows? Since I value power efficiency, I use -a 2 and No-OC; however, even though I tested several -a # settings, they all produce 550 h/s. I am using the latest Catalyst beta drivers. I assume cryptocurrency mining consumes little bandwidth or memory? So, PCIe splitters and low-memory GPUs should be cost-effective and have little effect on h/s? Finally, just as a brand/miner comparison, I swapped in a GTX 1080 FE to test with ccminer and it only produced 350 h/s.
RADEON RX 470 4GB connected via "Razer Core" eGPU (USB3.1c/Thunderbolt3/40Gbps) produces 550 h/s.
Is there anything I can do, other than OC, to increase h/s in Windows? Since I value power efficiency, I use -a 2 and No-OC; however, even though I tested several -a # settings, they all produce 550 h/s. I am using the latest Catalyst beta drivers. I assume cryptocurrency mining consumes little bandwidth or memory? So, PCIe splitters and low-memory GPUs should be cost-effective and have little effect on h/s? Finally, just as a brand/miner comparison, I swapped in a GTX 1080 FE to test with ccminer and it only produced 350 h/s.
Hashrates of mine, some overclocked:
Visiontek 5850 1GB: 180h/s (rlly OCd)
MSI R 7770 PMD1GD5 1GB: 180h/s
Sapphire HD 5830 1GB: 230 - 250h/s
Gigabyte 6850 GV-R685D5-1GD 1GB: 235h/s
Gigabyte R9 270x 4GB: 445h/s
Club R9 270x 2GB: 458h/s
XFX R9 390 8GB: 772h/s
If you want more details ask.
Soon I'll update with wattage info..
Visiontek 5850 1GB: 180h/s (rlly OCd)
MSI R 7770 PMD1GD5 1GB: 180h/s
Sapphire HD 5830 1GB: 230 - 250h/s
Gigabyte 6850 GV-R685D5-1GD 1GB: 235h/s
Gigabyte R9 270x 4GB: 445h/s
Club R9 270x 2GB: 458h/s
XFX R9 390 8GB: 772h/s
If you want more details ask.
Soon I'll update with wattage info..
5850 gives me 230 with no OC. whats your settings? OC'd should put out 250 or even more,depending on how far u push it.
Efficiency is another thing tho..
I think there's something wrong with it, doesn't seem to improve much over 900/1000, runs super hot. 90-100c
According my my gauge it takes ~200w.
I'll probably put it in a family computer as it's not at all profitable.
Claymore, Can you tell me why this hard locks PC everytime? I have to manually power off / on and it drives me insane lol
System is unstable for some reason, GPU #1 fails. Check hardware.
for the -cclock and -mclock ; i can't get it to work.
Start miner for 5 minutes and PM me the log file.
Claymore, Can you tell me why this hard locks PC everytime? I have to manually power off / on and it drives me insane lol
Code:
00:14:01:382 fb0 Round
00:14:01:397 de0 GPU 0: HashCnt = 832, time = 1451 ms, hashrate = 573 h/s
00:14:01:407 de0 Round
00:14:02:862 dd4 GPU 2: HashCnt = 832, time = 1451 ms, hashrate = 573 h/s
00:14:02:867 dd4 Round
00:14:02:882 de4 GPU 0: HashCnt = 832, time = 1451 ms, hashrate = 573 h/s
00:14:02:887 de4 Round
00:14:04:343 fb0 GPU 2: HashCnt = 832, time = 1451 ms, hashrate = 573 h/s
00:14:04:353 fb0 Round
00:14:04:368 de0 GPU 0: HashCnt = 832, time = 1451 ms, hashrate = 573 h/s
00:14:04:373 de0 Round
00:14:05:498 dcc watchdog - thread 0, hb time 2609
00:14:05:498 dcc watchdog - thread 1, hb time 1125
00:14:05:498 dcc watchdog - thread 2, hb time 61109
00:14:05:503 dcc WATCHDOG: Thread 2 hangs in OpenCL call, you need to restart miner :(
00:14:05:503 dcc watchdog - thread 3, hb time 59609
00:14:05:503 dcc watchdog - thread 4, hb time 2625
00:14:05:508 dcc watchdog - thread 5, hb time 1140
00:14:05:508 dcc WATCHDOG: GPU memory error, you need to restart miner :(
00:14:05:513 dcc Restarting OK, exit...
00:14:05:758 dd4 Job changed, drop current round
00:14:05:784 de4 Job changed, drop current round
00:14:01:397 de0 GPU 0: HashCnt = 832, time = 1451 ms, hashrate = 573 h/s
00:14:01:407 de0 Round
00:14:02:862 dd4 GPU 2: HashCnt = 832, time = 1451 ms, hashrate = 573 h/s
00:14:02:867 dd4 Round
00:14:02:882 de4 GPU 0: HashCnt = 832, time = 1451 ms, hashrate = 573 h/s
00:14:02:887 de4 Round
00:14:04:343 fb0 GPU 2: HashCnt = 832, time = 1451 ms, hashrate = 573 h/s
00:14:04:353 fb0 Round
00:14:04:368 de0 GPU 0: HashCnt = 832, time = 1451 ms, hashrate = 573 h/s
00:14:04:373 de0 Round
00:14:05:498 dcc watchdog - thread 0, hb time 2609
00:14:05:498 dcc watchdog - thread 1, hb time 1125
00:14:05:498 dcc watchdog - thread 2, hb time 61109
00:14:05:503 dcc WATCHDOG: Thread 2 hangs in OpenCL call, you need to restart miner :(
00:14:05:503 dcc watchdog - thread 3, hb time 59609
00:14:05:503 dcc watchdog - thread 4, hb time 2625
00:14:05:508 dcc watchdog - thread 5, hb time 1140
00:14:05:508 dcc WATCHDOG: GPU memory error, you need to restart miner :(
00:14:05:513 dcc Restarting OK, exit...
00:14:05:758 dd4 Job changed, drop current round
00:14:05:784 de4 Job changed, drop current round
@claymore
Don't know if you care of not but I thought I would let you know that your miner works with intel iGPU's as well they must meet Intel's Opencl reqirements.
I tried it on an Intel compute stick which has a z3735f chip and a Pentium G3258.
Don't know if you care of not but I thought I would let you know that your miner works with intel iGPU's as well they must meet Intel's Opencl reqirements.
I tried it on an Intel compute stick which has a z3735f chip and a Pentium G3258.
amazing that an Intel stick could mine - may I ask how many hash do you get from the compute stick?
@claymore
Don't know if you care of not but I thought I would let you know that your miner works with intel iGPU's as well they must meet Intel's Opencl reqirements.
I tried it on an Intel compute stick which has a z3735f chip and a Pentium G3258.
Don't know if you care of not but I thought I would let you know that your miner works with intel iGPU's as well they must meet Intel's Opencl reqirements.
I tried it on an Intel compute stick which has a z3735f chip and a Pentium G3258.
So, will the FCN MM ports on minergate work with 3.2 fine? Or is even MM working with this new miner version?
Solve my issue with making sure the -u was needed to put the email account for minergate in the bat file. Thanks for the no help crypto world....
On to a new issue: My 7970 isn't doing 450 h/s, but 370 h/s. I did gpu allocate at 100%. What settings are optimal to run is close to 450 h/s?
Jump to: