Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 186. (Read 2145059 times)
Does anyone know of any cryptonote miners that work well for nvidia cards?
this one is using less power than ether right ?
because today i was mining with cryptonote and have an rx470 what burn (smell lot), power riser looks ok
computer crash, i tested again it fail on cryptonote but still mining on ether, i tested couple of minutes before i remove
i put back original bios, it was moded, gonna sent it back
last week i burn the 4x 270 ring (not sure what it was mining) , powersupply burns, connector to motherboard and 2 risers
i think it started with riser than no power from riser, the power had to come via the pcie but there are only 2x 12v to the motherboard so
it get overheat, maybe 1 was already burn before but when 2nd burn it was to much for the motherboard
i repair the risers, just melt 2 wire from the power connector to the pci connector, 1 at each side, so i m sure it has enough power
i think the r9270 use more than 75w on the pci slot
i also repair the motherboard, sold 2 wire at backside of the connector of motherboard, and got a new powersupply , was on warranty
because today i was mining with cryptonote and have an rx470 what burn (smell lot), power riser looks ok
computer crash, i tested again it fail on cryptonote but still mining on ether, i tested couple of minutes before i remove
i put back original bios, it was moded, gonna sent it back
last week i burn the 4x 270 ring (not sure what it was mining) , powersupply burns, connector to motherboard and 2 risers
i think it started with riser than no power from riser, the power had to come via the pcie but there are only 2x 12v to the motherboard so
it get overheat, maybe 1 was already burn before but when 2nd burn it was to much for the motherboard
i repair the risers, just melt 2 wire from the power connector to the pci connector, 1 at each side, so i m sure it has enough power
i think the r9270 use more than 75w on the pci slot
i also repair the motherboard, sold 2 wire at backside of the connector of motherboard, and got a new powersupply , was on warranty
r9 270 = 510
RX480 with mod. bios speed up to ~800 (@1950 mem) 850 (@2050 mem) H\S (2050 on my card very unstable - is 4Gb model, low speed memory (1750 stock). On 8Gb models stock is 2000Mhz (overclock up to 2200 + modding timings), It should be fastest.
Using what powerdraw?
It works with -nofee 1 .
It does, but I would be happy to enable the dev fee if claymore released a fixed version with the correct username for dev mining! This is one of the few miners worth using my old card for.
RX480 with mod. bios speed up to ~800 (@1950 mem) 850 (@2050 mem) H\S (2050 on my card very unstable - is 4Gb model, low speed memory (1750 stock). On 8Gb models stock is 2000Mhz (overclock up to 2200 + modding timings), It should be fastest.
Print please your cofig file for miner 9.6
Can anyone advice, how come after I restart my computer and rerun the NsGpuCNMiner.exe, it mention that my IP BAN? what have happened.Thnks
RX480 with mod. bios speed up to ~800 (@1950 mem) 850 (@2050 mem) H\S (2050 on my card very unstable - is 4Gb model, low speed memory (1750 stock). On 8Gb models stock is 2000Mhz (overclock up to 2200 + modding timings), It should be fastest.
Thanks !! miner very good!
can i dual mine ether + XMR or ether + DASH ?
No. There are very few algorithms that allow dual mining.
can i dual mine ether + XMR or ether + DASH ?
645 when
Still ETH is more profitable - that you!
Still ETH is more profitable - that you!
What is hash rate with rx 480 8Gb one can expect?
630 h/s
try option -h 2048.. it may improve the hashrate...
I just get a bunch of low difficulty errors.
I thought it was just me.... I use rx 470 8gb actually .. at first with -h 2048 option I got very high hashrate around 1190s (almost 1200) with no error.. it was unbeliavable.. then after a while i got also many low difficulty errors... it's strange.....then i switched back to -h 1024 & had to mod my bios to get the higher rate than stock bios.. with the modded bios 1750 strap (copy the 1750 timing to 2000 using polaris bios editor) i got around 740 H/s with -h 1024 option..
645 with rx470 4G (690 when it start but drop to stable 645)
What is hash rate with rx 480 8Gb one can expect?
630 h/s
try option -h 2048.. it may improve the hashrate...
I just get a bunch of low difficulty errors.
What is hash rate with rx 480 8Gb one can expect?
630 h/s
try option -h 2048.. it may improve the hashrate...
What is hash rate with rx 480 8Gb one can expect?
630 h/s
What is hash rate with rx 480 8Gb one can expect?
It works with -nofee 1 .
yes i have that too
i think it s because def fees are not working
i hope claymore gonna release a new version with some more speed like on zcash
because i think the gpu can do better
i think it s because def fees are not working
i hope claymore gonna release a new version with some more speed like on zcash
because i think the gpu can do better
Jump to: