I've been mining Monero with v5.0 and even though I've got 14.6 drivers installed I was using the 13.12 version. Today I changed to the latest 5.1 version for 14.6 drivers and it is actually fractionally slower!
A 3 x 270 miner marginally overclocked with the latest version matched to the drivers is giving me 1086 h/s. The older version that doesn't match the AMD drivers was giving me 1089 h/s. Huh?
Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 254. (Read 2145040 times)
Hi, can anyone help me please? I cannot get it to start... my .bat file says:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
NsGpuCNMiner.exe -o stratum+tcp://pool.cryptoescrow.eu:3333 -u 44nmakZmwW... -p x
but all I'm getting is this error message in the log: "Missed required command line options!"
AMD 290, Win 8, Catalyst 13.12.
Yes,I have the same problem！Can anyone tell us what's wrong with it？setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
NsGpuCNMiner.exe -o stratum+tcp://pool.cryptoescrow.eu:3333 -u 44nmakZmwW... -p x
but all I'm getting is this error message in the log: "Missed required command line options!"
AMD 290, Win 8, Catalyst 13.12.
win7 64,Catalyst 14.6,AMD 7970
Take pool.bat as start point, start it to check that it works, then change only pool and wallet addresses.
Last time I saw this problem when some guy specified long hyphen instead of short one.
Hi, can anyone help me please? I cannot get it to start... my .bat file says:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
NsGpuCNMiner.exe -o stratum+tcp://pool.cryptoescrow.eu:3333 -u 44nmakZmwW... -p x
but all I'm getting is this error message in the log: "Missed required command line options!"
AMD 290, Win 8, Catalyst 13.12.
Yes,I have the same problem！Can anyone tell us what's wrong with it？setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
NsGpuCNMiner.exe -o stratum+tcp://pool.cryptoescrow.eu:3333 -u 44nmakZmwW... -p x
but all I'm getting is this error message in the log: "Missed required command line options!"
AMD 290, Win 8, Catalyst 13.12.
win7 64,Catalyst 14.6,AMD 7970
Hi, can anyone help me please? I cannot get it to start... my .bat file says:
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
NsGpuCNMiner.exe -o stratum+tcp://pool.cryptoescrow.eu:3333 -u 44nmakZmwW... -p x
but all I'm getting is this error message in the log: "Missed required command line options!"
AMD 290, Win 8, Catalyst 13.12.
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_USE_SYNC_OBJECTS 1
NsGpuCNMiner.exe -o stratum+tcp://pool.cryptoescrow.eu:3333 -u 44nmakZmwW... -p x
but all I'm getting is this error message in the log: "Missed required command line options!"
AMD 290, Win 8, Catalyst 13.12.
"unknown stratum packet: error 32700 parserror" message:
Minergate has a problem with stratum support, they told me that they are working on it. It's not a bug of the miner.
"outdated share found" message - it's ok, it's not error.
>Also the miner stops mining after some time.
It must restart itself then.
But other soft works fine (wolf`s cpu-miner and ccminer - no disconnects at that time). Minergate has a problem with stratum support, they told me that they are working on it. It's not a bug of the miner.
"outdated share found" message - it's ok, it's not error.
>Also the miner stops mining after some time.
It must restart itself then.
it seems miner 5.0 wants to start openCl thread hang issue with my Hynix cards......
Try "-li 1" option.
it appears to have slowed down the issue, how ever thread hanging is still happening even with new 5.1 miner. useing windows 7 13.12 drivers. have tried on windows 8 with both 13.12 and 14.6 drivers as well and had the same issue...
Cheers! Will do! 
Wow! Fastest answer I got ever! 
Thanks. But do I need to do something so it restarts? In .bat? I know there is a command of some sort but never used it, didn't need it.
And I saw that last "SHARE FOUND" was half an hour ago before I manually restarted it?
Thanks. But do I need to do something so it restarts? In .bat? I know there is a command of some sort but never used it, didn't need it.
And I saw that last "SHARE FOUND" was half an hour ago before I manually restarted it?
Check readme file, "-r" option. By default miner restarts itself automatically if it detects any problem. If it does not work for you, send me log file so I can check the reason.
Wow! Fastest answer I got ever!
Thanks. But do I need to do something so it restarts? In .bat? I know there is a command of some sort but never used it, didn't need it.
And I saw that last "SHARE FOUND" was half an hour ago before I manually restarted it?
Thanks. But do I need to do something so it restarts? In .bat? I know there is a command of some sort but never used it, didn't need it.
And I saw that last "SHARE FOUND" was half an hour ago before I manually restarted it?
"unknown stratum packet: error 32700 parserror" message:
Minergate has a problem with stratum support, they told me that they are working on it. It's not a bug of the miner.
"outdated share found" message - it's ok, it's not error.
>Also the miner stops mining after some time.
It must restart itself then.
Minergate has a problem with stratum support, they told me that they are working on it. It's not a bug of the miner.
"outdated share found" message - it's ok, it's not error.
>Also the miner stops mining after some time.
It must restart itself then.
I'm having an issue with 5.1 miner, well as with older ones, tried them too.
So, W7 x64 with 270 card, miner 5.1 for 14.6 drivers; wanted to MM on minergate FCN/BCN pair. Anyway I got a lot of share found messages and occasionally "outdated share found" (sometimes even few of those in a roll) and then "unknown stratum packet: error 32700 parserror ..."
Friend from another forum advised me to use miner for 13.12 drivers in combination with 14.4 drivers so I did... But then, still talking about mining on minergate, I still have "outdated share found" messages and some others, looks like this:
Also the miner stops mining after some time. What am I doing wrong?
Non-merged mining is also affected with "outdated shares" and the rest, on minergate.
Other pools work as intended and with this combo of 14.4 and 5.1 miner with 13.12 drivers and those two files (forgot to mention them earlier).
Bat file looks like this:
GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -a 1 -o stratum+tcp://bcn.extremepool.org:7777 -u 23HY3RYpFxyS9WCBKx9fX8LRmhsuvxXazaKKwYi83cBV5wzLcaqtwP6NVnxpvbDzXeX1Qsy5W8ZnpdG Wrw2pG4C6EDv9EXU -p x
So, W7 x64 with 270 card, miner 5.1 for 14.6 drivers; wanted to MM on minergate FCN/BCN pair. Anyway I got a lot of share found messages and occasionally "outdated share found" (sometimes even few of those in a roll) and then "unknown stratum packet: error 32700 parserror ..."
Friend from another forum advised me to use miner for 13.12 drivers in combination with 14.4 drivers so I did... But then, still talking about mining on minergate, I still have "outdated share found" messages and some others, looks like this:
Code:
07/16/14-19:07:25 - New job received from mcn-bcn.pool.minergate.com:45650
Speed: 328 h/s, TotalHashes: 592K, DevHashes: 28K Mining time: 00:30
07/16/14-19:07:28 - SHARE FOUND (target 1630) - (GPU 0 of 1)
DevFee: 07/16/14-19:07:34 - SHARE FOUND (target 444) - (GPU 0 of 1)
DevFee: 07/16/14-19:07:34 - SHARE FOUND (target 444) - (GPU 0 of 1)
07/16/14-19:07:36 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:07:38 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:07:38 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:07:49 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:07:51 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:07:57 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:07:59 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:08:01 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:08:01 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:08:03 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:08:05 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:08:07 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:08:17 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:08:26 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:08:26 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:08:36 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:08:36 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:08:40 - SHARE FOUND (target 1630) - (GPU 0 of 1)
cannot find block data:
{"error":"Blockexpired","id":1,"jsonrpc":"2.0","result":null}
cannot convert blob data
cannot find block data:
{"error":"Blockexpired","id":1,"jsonrpc":"2.0","result":null}
cannot convert target data
cannot find block data:
{"error":"Blockexpired","id":1,"jsonrpc":"2.0","result":null}
cannot convert jobid
07/16/14-19:08:40 - New job received from mcn-bcn.pool.minergate.com:45650
Speed: 328 h/s, TotalHashes: 617K, DevHashes: 30K Mining time: 00:31
07/16/14-19:08:40 - New job received from mcn-bcn.pool.minergate.com:45650
Speed: 328 h/s, TotalHashes: 617K, DevHashes: 30K Mining time: 00:31
Outdated share found - skip
07/16/14-19:08:48 - SHARE FOUND (target 1630) - (GPU 0 of 1)
07/16/14-19:08:50 - New job received from mcn-bcn.pool.minergate.com:45650
Speed: 328 h/s, TotalHashes: 620K, DevHashes: 30K Mining time: 00:31
DevFee: Outdated share found - skip
Also the miner stops mining after some time. What am I doing wrong?
Non-merged mining is also affected with "outdated shares" and the rest, on minergate.
Other pools work as intended and with this combo of 14.4 and 5.1 miner with 13.12 drivers and those two files (forgot to mention them earlier).
Bat file looks like this:
GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -a 1 -o stratum+tcp://bcn.extremepool.org:7777 -u 23HY3RYpFxyS9WCBKx9fX8LRmhsuvxXazaKKwYi83cBV5wzLcaqtwP6NVnxpvbDzXeX1Qsy5W8ZnpdG Wrw2pG4C6EDv9EXU -p x
it seems miner 5.0 wants to start openCl thread hang issue with my Hynix cards......
Try "-li 1" option.
6 KH/s Sent! keep it comin guys
OH MY GAWD...
ducknote.crypto-pool.fr offer 50% reward bonus ??* Seriously ??
- Are you fucking kidding me ?
- Damn I'm not fucking kidding ! Get your hash on that pool right n000w !!!
* for the next 100 blocks, starting now.
ducknote.crypto-pool.fr offer 50% reward bonus ??* Seriously ??
- Are you fucking kidding me ?
- Damn I'm not fucking kidding ! Get your hash on that pool right n000w !!!
* for the next 100 blocks, starting now.
it seems miner 5.0 wants to start openCl thread hang issue with my Hynix cards......
I have that issue too
OH too cool and more hash rate
how much of voltage? and asus 280x series? (dc2t -i think this- / dc2t v2 / matrix / other)
my asus dc2t clock 1120 can do only 485h/s fan speed higher and temp heat more than you
how much of voltage? and asus 280x series? (dc2t -i think this- / dc2t v2 / matrix / other)
my asus dc2t clock 1120 can do only 485h/s fan speed higher and temp heat more than you
ASUS Radeon R9 280, R9280-DC2T-3GD5 1150/1500/1093mV - 515h/s - 175W (215W rig)
it seems miner 5.0 wants to start openCl thread hang issue with my Hynix cards......
OH too cool and more hash rate
how much of voltage? and asus 280x series? (dc2t -i think this- / dc2t v2 / matrix / other)
my asus dc2t clock 1120 can do only 485h/s fan speed higher and temp heat more than you
how much of voltage? and asus 280x series? (dc2t -i think this- / dc2t v2 / matrix / other)
my asus dc2t clock 1120 can do only 485h/s fan speed higher and temp heat more than you
ASUS Radeon R9 280, R9280-DC2T-3GD5 1150/1500/1093mV - 515h/s - 175W (215W rig)
OH too cool and more hash rate
how much of voltage? and asus 280x series? (dc2t -i think this- / dc2t v2 / matrix / other)
my asus dc2t clock 1120 can do only 485h/s fan speed higher and temp heat more than you
Jump to: