Topic: Claymore&#039;s CryptoNote AMD GPU Miner v11.3 - page 311. (Read 2145062 times)

Quote from: pinoyminer1977 on June 10, 2014, 01:12:41 AM

Hi,

I have these warnings when I start my miner, can somebody help me, what is wrong?
..
..
..
Is this this an issue of my GPU driver?

I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?

You are using some variation of non-13.12 driver. I've actually had a rig or 2 working on the 14.4s with clPTS before.. so it still may work for you (but slower).

Either way, 800 h/s is low for 4 7950s. Each 7950 is capable of 300h/s+. All of my 5 card 7950 rigs do 1.3k+ @ 1100/1500, but they are also on the 13.12s.

THANK YOU for the replies, let me install 13.12 and add 1100/1500.

Ok, so I have installed 13.12 Catalyst on my 4-MSI 7950 and my settings below:

setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -o stratum+tcp://mine.moneropool.org:80 -u (address) -p x --gpu-engine 1000 --gpu-memclock 1500

This setting gives me a total of 1100 h/s .......and 275 h/s each, can I still push this to 300 h/s? I don't know how....

Also for 3 - R9 290s are getting a total of 1280 h/s with settings below:

setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -o stratum+tcp://mine.moneropool.org:80 -u (address) -p x

Actually no memclock and gpu engine settings, please post your settings here if you can get higher than mine.

With 3 290s I'm getting just shy of 1600h/s with 1200/1500. I guess this miner is not pushing the cards so much in its current state as I can't get anywhere near this high of an overclock usually.

Are you running 290's or 290x? I can't get mine stable at those clocks, driver crashes and system locks up. I'm running mine at 1100/1300 and getting 450h/s

Durgar

newbie

Activity: 17

Merit: 0

To me something seems off with either the profit calculator estimates, pools, the miner, or everything combined. Since I'm hashing at 1600h/s, yet every day I receive 30% less than what is supposed to be. Even with the miner fee and pool fee + lost shares, that can't be 30-35% less? Also it seems stock elpida 280x cards suffer from poor hashrate (260~ vs 364 hynix) that is a considerable loss, just like in scrypt coins, and overcloking the elpida cards doesn't seem to bring more than 30h/s more, still far off from a otherwise identical 280x with hynix vram. You can OC the gpu's considerably higher than say scrypt coins, yet overclocking seems to have very little effect to hash rate and power consumption on a 280x & 290. Seems like some parts of the cards are hardly utilized at all.

tc61

hero member

Activity: 494

Merit: 500

any nvida support ??

Casu

full member

Activity: 154

Merit: 100

Quote from: pinoyminer1977 on June 10, 2014, 05:34:26 AM

Quote from: pinoyminer1977 on June 10, 2014, 05:09:37 AM

Quote from: pinoyminer1977 on June 10, 2014, 01:12:41 AM

Hi,

I have these warnings when I start my miner, can somebody help me, what is wrong?
..
..
..
Is this this an issue of my GPU driver?

I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?

You are using some variation of non-13.12 driver. I've actually had a rig or 2 working on the 14.4s with clPTS before.. so it still may work for you (but slower).

Either way, 800 h/s is low for 4 7950s. Each 7950 is capable of 300h/s+. All of my 5 card 7950 rigs do 1.3k+ @ 1100/1500, but they are also on the 13.12s.

THANK YOU for the replies, let me install 13.12 and add 1100/1500.

Ok, so I have installed 13.12 Catalyst on my 4-MSI 7950 and my settings below:

setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -o stratum+tcp://mine.moneropool.org:80 -u (address) -p x --gpu-engine 1000 --gpu-memclock 1500

This setting gives me a total of 1100 h/s .......and 275 h/s each, can I still push this to 300 h/s? I don't know how....

Also for 3 - R9 290s are getting a total of 1280 h/s with settings below:

setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -o stratum+tcp://mine.moneropool.org:80 -u (address) -p x

Actually no memclock and gpu engine settings, please post your settings here if you can get higher than mine.

With 3 290s I'm getting just shy of 1600h/s with 1200/1500. I guess this miner is not pushing the cards so much in its current state as I can't get anywhere near this high of an overclock usually.

nrg_wolf

legendary

Activity: 882

Merit: 1000

Quote from: pinoyminer1977 on June 10, 2014, 05:34:26 AM

Quote from: pinoyminer1977 on June 10, 2014, 05:09:37 AM

Quote from: pinoyminer1977 on June 10, 2014, 01:12:41 AM

Hi,

I have these warnings when I start my miner, can somebody help me, what is wrong?
..
..
..
Is this this an issue of my GPU driver?

I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?

You are using some variation of non-13.12 driver. I've actually had a rig or 2 working on the 14.4s with clPTS before.. so it still may work for you (but slower).

Either way, 800 h/s is low for 4 7950s. Each 7950 is capable of 300h/s+. All of my 5 card 7950 rigs do 1.3k+ @ 1100/1500, but they are also on the 13.12s.

THANK YOU for the replies, let me install 13.12 and add 1100/1500.

Ok, so I have installed 13.12 Catalyst on my 4-MSI 7950 and my settings below:

setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -o stratum+tcp://mine.moneropool.org:80 -u (address) -p x --gpu-engine 1000 --gpu-memclock 1500

This setting gives me a total of 1100 h/s .......and 275 h/s each, can I still push this to 300 h/s? I don't know how....

Also for 3 - R9 290s are getting a total of 1280 h/s with settings below:

setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -o stratum+tcp://mine.moneropool.org:80 -u (address) -p x

Actually no memclock and gpu engine settings, please post your settings here if you can get higher than mine.

for the 7950's set 1140/1250 and that will wield about 302.5H/s per card, depending card quality and brand etc...

pinoyminer1977

member

Activity: 77

Merit: 10

Quote from: pinoyminer1977 on June 10, 2014, 05:09:37 AM

Quote from: pinoyminer1977 on June 10, 2014, 01:12:41 AM

Hi,

I have these warnings when I start my miner, can somebody help me, what is wrong?
..
..
..
Is this this an issue of my GPU driver?

I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?

You are using some variation of non-13.12 driver. I've actually had a rig or 2 working on the 14.4s with clPTS before.. so it still may work for you (but slower).

Either way, 800 h/s is low for 4 7950s. Each 7950 is capable of 300h/s+. All of my 5 card 7950 rigs do 1.3k+ @ 1100/1500, but they are also on the 13.12s.

THANK YOU for the replies, let me install 13.12 and add 1100/1500.

Ok, so I have installed 13.12 Catalyst on my 4-MSI 7950 and my settings below:

setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -o stratum+tcp://mine.moneropool.org:80 -u (address) -p x --gpu-engine 1000 --gpu-memclock 1500

This setting gives me a total of 1100 h/s .......and 275 h/s each, can I still push this to 300 h/s? I don't know how....

Also for 3 - R9 290s are getting a total of 1280 h/s with settings below:

setx GPU_MAX_ALLOC_PERCENT 100
NsGpuCNMiner.exe -o stratum+tcp://mine.moneropool.org:80 -u (address) -p x

Actually no memclock and gpu engine settings, please post your settings here if you can get higher than mine.

nrg_wolf

legendary

Activity: 882

Merit: 1000

gigabyte WF3 280x seem to be very terrible at this algo..... barley do 300 which i believe is odd as my asus 280x's can do 360h/s easy...... wonder if it has something to do with the cards being voltage locked from factory, which leaves very little OC room....

pinoyminer1977

member

Activity: 77

Merit: 10

Quote from: pinoyminer1977 on June 10, 2014, 01:12:41 AM

Hi,

I have these warnings when I start my miner, can somebody help me, what is wrong?
..
..
..
Is this this an issue of my GPU driver?

I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?

You are using some variation of non-13.12 driver. I've actually had a rig or 2 working on the 14.4s with clPTS before.. so it still may work for you (but slower).

Either way, 800 h/s is low for 4 7950s. Each 7950 is capable of 300h/s+. All of my 5 card 7950 rigs do 1.3k+ @ 1100/1500, but they are also on the 13.12s.

THANK YOU for the replies, let me install 13.12 and add 1100/1500.

atp1916

legendary

Activity: 854

Merit: 1000

Quote from: pinoyminer1977 on June 10, 2014, 01:12:41 AM

Hi,

I have these warnings when I start my miner, can somebody help me, what is wrong?
..
..
..
Is this this an issue of my GPU driver?

I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?

You are using some variation of non-13.12 driver. I've actually had a rig or 2 working on the 14.4s with clPTS before.. so it still may work for you (but slower).

Either way, 800 h/s is low for 4 7950s. Each 7950 is capable of 300h/s+. All of my 5 card 7950 rigs do 1.3k+ @ 1100/1500, but they are also on the 13.12s.

nrg_wolf

legendary

Activity: 882

Merit: 1000

Quote from: MrJay on June 10, 2014, 04:09:55 AM

Quote from: nrg_wolf on June 10, 2014, 03:40:20 AM

Quote from: MrJay on June 10, 2014, 03:21:44 AM

Quote from: pinoyminer1977 on June 10, 2014, 01:12:41 AM

Hi,

Is this this an issue of my GPU driver?

I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?

I have a 4x msi 7950 rig as well and mine appears to be hashing around 1066h/s, core clocks between 1070 - 1100, looks like mem clock is not used as it is sitting at 1000mhz.

my 2 alone get 605H/s, they can break 300 each easy and stable.

What clocks are you running then?

1140/1250

Thanks, now lets see how stable this is - Speed: 1207 h/s

i also have the undervolt bios at 0.975 and no issues

MrJay

member

Activity: 115

Merit: 10

Quote from: nrg_wolf on June 10, 2014, 03:40:20 AM

Quote from: MrJay on June 10, 2014, 03:21:44 AM

Quote from: pinoyminer1977 on June 10, 2014, 01:12:41 AM

Hi,

Is this this an issue of my GPU driver?

I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?

I have a 4x msi 7950 rig as well and mine appears to be hashing around 1066h/s, core clocks between 1070 - 1100, looks like mem clock is not used as it is sitting at 1000mhz.

my 2 alone get 605H/s, they can break 300 each easy and stable.

What clocks are you running then?

1140/1250

Thanks, now lets see how stable this is - Speed: 1207 h/s

nrg_wolf

legendary

Activity: 882

Merit: 1000

Quote from: MrJay on June 10, 2014, 03:21:44 AM

Quote from: pinoyminer1977 on June 10, 2014, 01:12:41 AM

Hi,

Is this this an issue of my GPU driver?

I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?

I have a 4x msi 7950 rig as well and mine appears to be hashing around 1066h/s, core clocks between 1070 - 1100, looks like mem clock is not used as it is sitting at 1000mhz.

my 2 alone get 605H/s, they can break 300 each easy and stable.

What clocks are you running then?

1140/1250

MrJay

member

Activity: 115

Merit: 10

Quote from: pinoyminer1977 on June 10, 2014, 01:12:41 AM

Hi,

Is this this an issue of my GPU driver?

I am using MSI 7950 Twin Frozr and I think the speed of the 4 GPU's is 800 h/s, is this normal or low for 4 cards?

I have a 4x msi 7950 rig as well and mine appears to be hashing around 1066h/s, core clocks between 1070 - 1100, looks like mem clock is not used as it is sitting at 1000mhz.

my 2 alone get 605H/s, they can break 300 each easy and stable.

What clocks are you running then?

nrg_wolf

legendary

Activity: 882

Merit: 1000