Author

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 312. (Read 2145062 times)

full member
Activity: 186
Merit: 100
Monero
How soon will a Linux version be released?

I can't wait to try this out.  Tongue
legendary
Activity: 2156
Merit: 1131

Hi everyone.

I opened a new pool for duckNote :

duck.crypto-pool.fr

It is as great as monero.crypto-pool.fr because it has all improvements & fix.

The address is : stratum+tcp://duck.crypto-pool.fr:6677

Have a try Wink
full member
Activity: 173
Merit: 100
Miner shows raw rate and this value is correct. Pool shows final rate so it is always lower.
Also pool does not accept outdated shares (1-2%) though it does not return any errors about it so you don't see it in miner.
Also don't forget about "Outdated share found - skip" messages - it's about 3-5% of shares.

Thank you, you're right.
Block received: 291
Block orphans: 97
Excuse me if I offended you.
donator
Activity: 1610
Merit: 1325
Miners developer
Miner shows raw rate and this value is correct. Pool shows final rate so it is always lower.
Also pool does not accept outdated shares (1-2%) though it does not return any errors about it so you don't see it in miner.
Also don't forget about "Outdated share found - skip" messages - it's about 3-5% of shares.
full member
Activity: 266
Merit: 119
Guys, to me there is a big difference than what shows me the program and what my pool account as hash.
To you is there such a difference. It is more than 30% yield by making graphics unreasonable.

yes,i have the same problem.I mine at monero.com and gpu miner shows 1606kh/s and i should be getting  8.25xmr-% dev fee+%2 miner fee:7.6xmr  with current difficulty but i only got 6.8 xmr today.Either miner values are not correct or pool takes more than %2.

Did you account for orphans? Look at your pool and see what the percentage of orphans is. Subtract that percentage, and you probably will end up close to what you got paid.
legendary
Activity: 882
Merit: 1000
My platforms show 2.8KH.
Pool shows me 2.4KH.
Some deceive us , but who?
mines the same, supposed to have about 2950H/s but pool barely goes over 2400h/s...
sr. member
Activity: 560
Merit: 250
"Trading Platform of The Future!"
My platforms show 2.8KH.
Pool shows me 2.4KH.
Some deceive us , but who?
The pool's displayed hashrate is an estimate based on the shares you have submitted. The miner's hashrate is correct. The pool also doesn't include the devfee in your hashrate.
full member
Activity: 173
Merit: 100
My platforms show 2.8KH.
Pool shows me 2.4KH.
Some deceive us , but who?
sr. member
Activity: 378
Merit: 250
Guys, to me there is a big difference than what shows me the program and what my pool account as hash.
To you is there such a difference. It is more than 30% yield by making graphics unreasonable.

yes,i have the same problem.I mine at monero.com and gpu miner shows 1606kh/s and i should be getting  8.25xmr-% dev fee+%2 miner fee:7.6xmr  with current difficulty but i only got 6.8 xmr today.Either miner values are not correct or pool takes more than %2.
legendary
Activity: 882
Merit: 1000
Anyone who has problems with dropping hashrate after some time - send me PM with detailed description of your system (Windows, Catalyst, CPU, GPUs) and I will send you version with extended debug log for tests.
Pm'ed ya dev...
donator
Activity: 1610
Merit: 1325
Miners developer
Anyone who has problems with dropping hashrate after some time - send me PM with detailed description of your system (Windows, Catalyst, CPU, GPUs) and I will send you version with extended debug log for tests.
full member
Activity: 173
Merit: 100
Guys, to me there is a big difference than what shows me the program and what my pool account as hash.
To you is there such a difference. It is more than 30% yield by making graphics unreasonable.
legendary
Activity: 882
Merit: 1000
any news or temp fix's for gpu's randomly dropping in multi card rigs yet?
full member
Activity: 168
Merit: 100
Hello,

Today i test some state on CPU Corei7 and GPU 7970/280x  on Stock speed.

Still CPU mining is more profitable then GPU.  Correct me if i wrong.

GPU 7970

 Last Share Submitted: 9 minutes ago
 Hash Rate: 283.33 H/sec
 Total Hashes Submitted: 3046000
 Total Paid: 0.041208821681 MRO

Core i7
 Last Share Submitted: 9 minutes ago
 Hash Rate: 74.85 H/sec
 Total Hashes Submitted: 1609391
 Total Paid: 0.110083097403 XMR


GPU submitted 3046000 and get paid : 0.041208821681 MRO

CPU submitted 1609391 and get paid:  0.110083097403 MRO.


so its mean we mine for Dev only?

Again correct me if i wrong



That doesn't make sense at all.  BTW, why are you only getting 74.85 for your CPU?  That's way low.

But by your own shares, you should get a bit more then 3 times the coins for the GPU.

How do you know how much you made for each?  Do you have two wallet addresses and use a different one for each?

My suggestion only as a test would be to generate 2 new wallet addresses for a different coin you have not mined in the last day such as Quazar (QCN).  Setup and run both the CPU and GPU at the same time for that other coin for say 1 hour.  After an hour switch back to XMR and then wait until the coins come in from QCN.  This will prove exactly how much differernce there is without the chance of polluting your results since you have already been mining XMR.

OR

Just generate 2 brand new wallet addresses for XMR and use them for the test.  Just make sure you haven't used either address before.  This will give you clean results.

Carlo
full member
Activity: 289
Merit: 100
O2-Protocol.com Carbon Offset DeFi
Claymore any fix for the dropping GPU activity related to VM error?
full member
Activity: 175
Merit: 100
You can't send directly to an exchange, send you your local wallet. Then hold them and stop dumping on the exchanges plz ok thnks
sr. member
Activity: 443
Merit: 250



Example :

Type this in a command prompt or make a batch file :

setx GPU_MAX_ALLOC_PERCENT 100
C:\Path_to_miner\NsGpuCNMiner.exe -o stratum+tcp://monero.crypto-pool.fr:6666 -u your_address_here -p x





if I want it to be send direct to an exchange adress is this possible when I write the adress in the command-line or what should I do with the payment_ID?
full member
Activity: 175
Merit: 100
Running AMD driver 14.4 gets me 580 h/s.

Copying the AMD opencl files from the 13.12 driver package to the same folder as the GPU miner gets me 810h/s and less error messages, while still on 14.4 driver

Keep your new driver, download the old 13.12 driver from
http://support.amd.com/en-us/download/desktop/previous?os=Windows%207%20-%2064
and only run the first step of the installer, that unzips the files to the c:\amd folder, then exit the installation.
Then copy the amdocl* and amd_opencl* to the GPU miner folder from
c:\AMD\Support\13-12_win7_win8_64_dd_ccc_whql\Packages\Drivers\Display\WB6A_INF\B165829\

Would be nice to have the files included with the miner, but I guess there is a small copyright issue...

What cards are you using? Is that 810 h/s per card?
member
Activity: 117
Merit: 10
Hello,

Today i test some state on CPU Corei7 and GPU 7970/280x  on Stock speed.

Still CPU mining is more profitable then GPU.  Correct me if i wrong.

GPU 7970

 Last Share Submitted: 9 minutes ago
 Hash Rate: 283.33 H/sec
 Total Hashes Submitted: 3046000
 Total Paid: 0.041208821681 MRO

Core i7
 Last Share Submitted: 9 minutes ago
 Hash Rate: 74.85 H/sec
 Total Hashes Submitted: 1609391
 Total Paid: 0.110083097403 XMR


GPU submitted 3046000 and get paid : 0.041208821681 MRO

CPU submitted 1609391 and get paid:  0.110083097403 MRO.


so its mean we mine for Dev only?

Again correct me if i wrong

full member
Activity: 138
Merit: 100
Testing older AMD drivers, by putting the AMD OpenCL (amd_opencl*.dll and amdocl*.dll )files in the same folder as the miner:

13.4 - Gives out of memory errors (GPU memory allocation failed)
13.9 - Similar performance as 13.12
13.12 - Baseline
14.4 - A lot slower, about 25% and gives error codes at startup
14.6 beta - A lot slower, about 25% and complains about "bad performance mode" at startup
Jump to: