Claymore's CryptoNote AMD GPU Miner v11.3 - page 93.

swampfighter

newbie

Activity: 9

Merit: 0

Quote from: infojunkiePHD on October 02, 2017, 07:22:41 AM

Quote from: ser_ator on October 02, 2017, 03:35:15 AM

Quote from: infojunkiePHD on October 01, 2017, 05:12:04 PM

Claymore - Possible bug.

With 10.2 Beta I am getting incorrect shares on my two Gigabyte 270 OC (Pitcairn) (non X)

I'm using the stock settings (-h 512) on non-overclocked cards. 9.7 did/does not give incorrect shares.

For me, this miner, for the old cards type 7850(1,2gb), 270(x), 280(x) is totally unusable, unfortunately. 15-30% less hash from clay9.7 version and too manny low diff share.

I spend 40 hours of my life trying to install it properly that at least I get at least the same hash rate, but , it's not worth it. 7850 with 1 GB of memory and 7950 remain on clay9.7, the rest on kachur miner

My two 270s get 422 and 456h/s respectively when I engage the overclock settings. No other miner provides me with anything near that.

I have the same gigabyte cards.

9.7 provides me with better hashrates. 860h/s between my two 270 versus 840h/s with 10.2. I'm not running blockchain drivers though on this particular computer, I use this workstation for photo/video editing and I don't know how much the blockchain drivers will affect performance for that.

treanski

full member

Activity: 364

Merit: 106

ONe Social Network.

Quote from: deadsix on October 02, 2017, 09:26:42 AM

Quote from: UnclWish on October 02, 2017, 05:34:07 AM

Quote from: doktor83 on October 02, 2017, 05:19:00 AM

Quote from: UnclWish on October 02, 2017, 04:56:31 AM

Quote from: CryptoPeter on October 02, 2017, 03:42:34 AM

I'm able to get about 760-790 h/s with 10.2 on my cards. Mix of RX 570s/580s 4GB.

On a 580 8GB I have it gets slightly above 800 h/s but thats about the best I can get so far.

If anyone has gotten higher and have any tips let me know.

Thanks

On my RX 580 8Gb(hynix) 1380/2200 I can reach 840-850 h/s -h 1800 -dmem 1
There is some peoples have 1k+ h/s on 480... I don't know how.

with ubermix 3.1 straps and samsung mem

I didn't rtied ubermix straps on my hynix memory. It's possible that they are will work on hynix memory?

No, please do not try to use memory straps from SAMSUNG memory on HYNIX because you risk breaking your card.

bullshit...

deadsix

hero member

Activity: 751

Merit: 517

Fail to plan, and you plan to fail.

Quote from: UnclWish on October 02, 2017, 05:34:07 AM

Quote from: doktor83 on October 02, 2017, 05:19:00 AM

Quote from: UnclWish on October 02, 2017, 04:56:31 AM

Quote from: CryptoPeter on October 02, 2017, 03:42:34 AM

I'm able to get about 760-790 h/s with 10.2 on my cards. Mix of RX 570s/580s 4GB.

On a 580 8GB I have it gets slightly above 800 h/s but thats about the best I can get so far.

If anyone has gotten higher and have any tips let me know.

Thanks

On my RX 580 8Gb(hynix) 1380/2200 I can reach 840-850 h/s -h 1800 -dmem 1
There is some peoples have 1k+ h/s on 480... I don't know how.

with ubermix 3.1 straps and samsung mem

I didn't rtied ubermix straps on my hynix memory. It's possible that they are will work on hynix memory?

No, please do not try to use memory straps from SAMSUNG memory on HYNIX because you risk breaking your card.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: UnclWish on October 02, 2017, 05:34:07 AM

Quote from: doktor83 on October 02, 2017, 05:19:00 AM

Quote from: UnclWish on October 02, 2017, 04:56:31 AM

Quote from: CryptoPeter on October 02, 2017, 03:42:34 AM

I'm able to get about 760-790 h/s with 10.2 on my cards. Mix of RX 570s/580s 4GB.

On a 580 8GB I have it gets slightly above 800 h/s but thats about the best I can get so far.

If anyone has gotten higher and have any tips let me know.

Thanks

On my RX 580 8Gb(hynix) 1380/2200 I can reach 840-850 h/s -h 1800 -dmem 1
There is some peoples have 1k+ h/s on 480... I don't know how.

with ubermix 3.1 straps and samsung mem

I didn't rtied ubermix straps on my hynix memory. It's possible that they are will work on hynix memory?

i don't know, but you asked how some people have 1k+ on 480, and i gave you an answer

infojunkiePHD

newbie

Activity: 49

Merit: 0

Quote from: ser_ator on October 02, 2017, 03:35:15 AM

Quote from: infojunkiePHD on October 01, 2017, 05:12:04 PM

Claymore - Possible bug.

With 10.2 Beta I am getting incorrect shares on my two Gigabyte 270 OC (Pitcairn) (non X)

I'm using the stock settings (-h 512) on non-overclocked cards. 9.7 did/does not give incorrect shares.

For me, this miner, for the old cards type 7850(1,2gb), 270(x), 280(x) is totally unusable, unfortunately. 15-30% less hash from clay9.7 version and too manny low diff share.

I spend 40 hours of my life trying to install it properly that at least I get at least the same hash rate, but , it's not worth it. 7850 with 1 GB of memory and 7950 remain on clay9.7, the rest on kachur miner

My two 270s get 422 and 456h/s respectively when I engage the overclock settings. No other miner provides me with anything near that.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: doktor83 on October 02, 2017, 05:19:00 AM

Quote from: UnclWish on October 02, 2017, 04:56:31 AM

Quote from: CryptoPeter on October 02, 2017, 03:42:34 AM

I'm able to get about 760-790 h/s with 10.2 on my cards. Mix of RX 570s/580s 4GB.

On a 580 8GB I have it gets slightly above 800 h/s but thats about the best I can get so far.

If anyone has gotten higher and have any tips let me know.

Thanks

On my RX 580 8Gb(hynix) 1380/2200 I can reach 840-850 h/s -h 1800 -dmem 1
There is some peoples have 1k+ h/s on 480... I don't know how.

with ubermix 3.1 straps and samsung mem

I didn't rtied ubermix straps on my hynix memory. It's possible that they are will work on hynix memory?

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: UnclWish on October 02, 2017, 04:56:31 AM

Quote from: CryptoPeter on October 02, 2017, 03:42:34 AM

I'm able to get about 760-790 h/s with 10.2 on my cards. Mix of RX 570s/580s 4GB.

On a 580 8GB I have it gets slightly above 800 h/s but thats about the best I can get so far.

If anyone has gotten higher and have any tips let me know.

Thanks

On my RX 580 8Gb(hynix) 1380/2200 I can reach 840-850 h/s -h 1800 -dmem 1
There is some peoples have 1k+ h/s on 480... I don't know how.

with ubermix 3.1 straps and samsung mem

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: CryptoPeter on October 02, 2017, 03:42:34 AM

I'm able to get about 760-790 h/s with 10.2 on my cards. Mix of RX 570s/580s 4GB.

On a 580 8GB I have it gets slightly above 800 h/s but thats about the best I can get so far.

If anyone has gotten higher and have any tips let me know.

Thanks

On my RX 580 8Gb(hynix) 1380/2200 I can reach 840-850 h/s -h 1800 -dmem 1
There is some peoples have 1k+ h/s on 480... I don't know how.

CryptoPeter

newbie

Activity: 19

Merit: 0

I'm able to get about 760-790 h/s with 10.2 on my cards. Mix of RX 570s/580s 4GB.

On a 580 8GB I have it gets slightly above 800 h/s but thats about the best I can get so far.

If anyone has gotten higher and have any tips let me know.

Thanks

ser_ator

newbie

Activity: 19

Merit: 0

Quote from: infojunkiePHD on October 01, 2017, 05:12:04 PM

Claymore - Possible bug.

With 10.2 Beta I am getting incorrect shares on my two Gigabyte 270 OC (Pitcairn) (non X)

I'm using the stock settings (-h 512) on non-overclocked cards. 9.7 did/does not give incorrect shares.

For me, this miner, for the old cards type 7850(1,2gb), 270(x), 280(x) is totally unusable, unfortunately. 15-30% less hash from clay9.7 version and too manny low diff share.

I spend 40 hours of my life trying to install it properly that at least I get at least the same hash rate, but , it's not worth it. 7850 with 1 GB of memory and 7950 remain on clay9.7, the rest on kachur miner

infojunkiePHD

newbie

Activity: 49

Merit: 0

Claymore - Possible bug.

With 10.2 Beta I am getting incorrect shares on my two Gigabyte 270 OC (Pitcairn) (non X)

I'm using the stock settings (-h 512) on non-overclocked cards. 9.7 did/does not give incorrect shares.

ManeBjorn

legendary

Activity: 1288

Merit: 1004

What settings are you using? My Vega 64 is stuck at 980. If I enable 8gb memory it goes down to 570.
Really weird.

Quote from: anadventureisu on October 01, 2017, 02:33:31 PM

Quote from: Jackkyy on October 01, 2017, 11:21:11 AM

Whats your HashRate with Vega Huh

i see only with rx 480 / rx 580

Thanks

Currently getting 1120 H/s with vega64. Not using the blockchain drivers yet. RAM 1100, GPU 1500.

anadventureisu

newbie

Activity: 11

Merit: 0

Quote from: Jackkyy on October 01, 2017, 11:21:11 AM

Whats your HashRate with Vega Huh

i see only with rx 480 / rx 580

Thanks

Currently getting 1120 H/s with vega64. Not using the blockchain drivers yet. RAM 1100, GPU 1500.

Grinner888

newbie

Activity: 20

Merit: 0

Hi, has anyone encountered the cannot find block data/cannot convert blob data error? has anyone experienced the GPU0 is mining significantly slower than the other GPUs in multi GPU setup? using 10.1 miner with AMD blockchain drivers on RX470. will appreciate any feedback.

candymonkey

full member

Activity: 210

Merit: 100

I haven't installed the blockchain drivers yet what is the comparison from what some ppl say you only gain a few mh but uses more power is this true just asking I"m thinking of switching also what gpu utilities work best

MikeHenderson

jr. member

Activity: 51

Merit: 1

Quote from: ?? on ??

Quote from: UnclWish on September 30, 2017, 06:53:34 PM

Quote from: ?? on ??

Quote from: SmileyBob on September 30, 2017, 06:21:56 PM

Wolf0 congrats, people says your miner is faster than Claymore!

Meh, it is in some cases, but only a bit. If I wanted to have a contest, I wouldn't hand the competitor my entry, duh. Tongue

Are you share your miner version?

My public one is on Github! Or in SGMiner-GM.

Hey wolf, thank you for all your work. Have you done any testing with the vega frontier? Any clue of optimal settings? 4 threads possible/better?

Kumic

full member

Activity: 533

Merit: 100

Quote from: doktor83 on October 01, 2017, 03:41:37 AM

Quote from: ?? on ??

Quote from: doktor83 on October 01, 2017, 03:19:17 AM

Quote from: SmileyBob on September 30, 2017, 07:09:51 PM

Quote from: UnclWish on September 30, 2017, 06:53:34 PM

Quote from: ?? on ??

Quote from: SmileyBob on September 30, 2017, 06:21:56 PM

Wolf0 congrats, people says your miner is faster than Claymore!

Meh, it is in some cases, but only a bit. If I wanted to have a contest, I wouldn't hand the competitor my entry, duh. Tongue

Are you share your miner version?

Wolf0 miner is opensource, meaning the code is free; so anyone could make it faster or do whatever they want with it.

miner is opensource, but he has a fancy kernel that works only for $$$ Cheesy

Nope. I don't plan on selling/releasing any CN code - at least atm.

what's the point of being good/best if nobody knows about it? Tongue

I'm sure you have a goddamnly good optimised kernel and you keeping it just for yourself Cheesy

Maybe he has a big mine with lots of rigs and with the faster miner, he has an advantage. In another word, he is earning money with his skills.

Jackkyy

full member

Activity: 252

Merit: 100

Whats your HashRate with Vega Huh

i see only with rx 480 / rx 580

Thanks

FFI2013

hero member

Activity: 906

Merit: 507

I have a few msi rx470 8gb micron memory 1850/1150 the higher the h the slower it goes for exp claymore sets it auto at 1800 I get 300 i tried 1500 I get 500 if I set it at 900 I get 630 which is the highest I can get them 1750 straps which happens to be the highest I get my msi rx470 4gb every time I try hight than 1850 clock they crash

Hurtman

full member

Activity: 180

Merit: 100

Quote from: garytheasshole on October 01, 2017, 09:34:01 AM

Quote from: Spill on October 01, 2017, 09:30:31 AM

Hi Claymore, any chance you can make this compatible with minergate's email address pool, like 9.7 was i'm tired of making different
blockchain wallets . Cry

They skim hashes and eat babies, shady fuckers, choose a more sane pool.

LOL!!!

Topic: Claymore's CryptoNote AMD GPU Miner v11.3 - page 93. (Read 2145056 times)