Looks like the link to download v4.0 doesn't work. THe mirror doesn't have it either. Did dev remove it on purpose due to bugs?
its working on my side try Mega.co.nz
https://mega.co.nz/#F!Hg4g1bLT!4Upg8GNiEZYCaZ04XVh_yg
https://imgur.com/a/jCE6ZuM
Topic: Claymore's CryptoNote Windows CPU Miner v4.0 - page 3. (Read 565399 times)
its working on my side try Mega.co.nz
https://mega.co.nz/#F!Hg4g1bLT!4Upg8GNiEZYCaZ04XVh_yg
https://imgur.com/a/jCE6ZuM
Hi ,
Sorry for my English , I'm new here.
For all the people with this error :
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
Download and install : microsoft visual c++ redistributable
restart and try again .
Sorry for my English , I'm new here.
For all the people with this error :
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
Download and install : microsoft visual c++ redistributable
restart and try again .
Oчeнь интepecнo, бyдy пpoбoвaть.
Google translate：Very interesting, I will try.
Oчeнь интepecнo, бyдy пpoбoвaть.
IPBC finally forked. I had been using Claymore CryptoNote CPU miner before but it's not working now, even with the -pow7 1 command. Error is the same across a few pools and for the GPU version.
Is this software still viable for IPBC? I prefer Claymore's miners because the bat-file command documentation is very clear. User interface is similar across the many algos.
Thanks for the help.
Quote
04/16/18-16:09:45 - SHARE FOUND (target 20000) - (THR 1 of 4)
Share rejected (172 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
Share rejected (172 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
Is this software still viable for IPBC? I prefer Claymore's miners because the bat-file command documentation is very clear. User interface is similar across the many algos.
Thanks for the help.
anyone getting really inconsistent speed? im running 4770k which should be around 270h/s according to claymore. however, i can only hit it very rarely. most of it time, it hovers around 160-200 h/s which is significantly lower than 270...
running on supportxmr
running on supportxmr
Me too. i7-8700k before hard fork 280-380 h/s, now 180. Very annoying...
update: i try to start the miner again and again, and ohlala, the magic 380 h/s. But i need restart about 10-20 times :-/
How much system ram do you have? How much virtual memory do you have set?
Try adding more system memory and see if it improves this slowdown. I get a similiar issue with GPUs on systems with too little ram.
anyone getting really inconsistent speed? im running 4770k which should be around 270h/s according to claymore. however, i can only hit it very rarely. most of it time, it hovers around 160-200 h/s which is significantly lower than 270...
running on supportxmr
running on supportxmr
Me too. i7-8700k before hard fork 280-380 h/s, now 180. Very annoying...
update: i try to start the miner again and again, and ohlala, the magic 380 h/s. But i need restart about 10-20 times :-/
I have given up and will wait for Claymore's upgrade. I simply can't figure out how to configure the other miners.
What other miner would you suugst to replace Claymore for the time being?
[/quote]
For CPU mining
XMRig AMD 2.6.0 - https://github.com/xmrig/xmrig-amd/
XMR-STAK - https://github.com/fireice-uk/xmr-stak
Thread started by Mattthev Kudos to him
https://bitcointalksearch.org/topic/guideamdnvidiacpuxmrhow-to-mine-moneroryo-miners-downloads-2126975
[/quote]
Thanks a lot for the info.
[/quote]
For CPU mining
XMRig AMD 2.6.0 - https://github.com/xmrig/xmrig-amd/
XMR-STAK - https://github.com/fireice-uk/xmr-stak
Thread started by Mattthev Kudos to him
https://bitcointalksearch.org/topic/guideamdnvidiacpuxmrhow-to-mine-moneroryo-miners-downloads-2126975
[/quote]
Thanks a lot for the info.
Thanks your v4.0! Even let it be free!
It's a good news for person who don't know how to compile at WIN, just like me.
It's a good news for person who don't know how to compile at WIN, just like me.
Hi, I have 2 questions
1- Since about a week ago I can't mine sumo, error message says sumo changed algo, use xmr ver 2.*
Is there any way to use claymore's like before?
2- I have no problem with dev fee, so how to enable it or donate to claymore?
1- Since about a week ago I can't mine sumo, error message says sumo changed algo, use xmr ver 2.*
Is there any way to use claymore's like before?
2- I have no problem with dev fee, so how to enable it or donate to claymore?
Unfortunately no, Unless Claymore revised his miner to support Cryptonight-Heavy Algo you cant mine Sumo with it.
my advise, use other miner out there
What other miner would you suugst to replace Claymore for the time being?
For CPU mining
XMRig AMD 2.6.0 - https://github.com/xmrig/xmrig-amd/
XMR-STAK - https://github.com/fireice-uk/xmr-stak
Thread started by Mattthev Kudos to him
https://bitcointalksearch.org/topic/guideamdnvidiacpuxmrhow-to-mine-moneroryo-miners-downloads-2126975
Hi, I have 2 questions
1- Since about a week ago I can't mine sumo, error message says sumo changed algo, use xmr ver 2.*
Is there any way to use claymore's like before?
2- I have no problem with dev fee, so how to enable it or donate to claymore?
1- Since about a week ago I can't mine sumo, error message says sumo changed algo, use xmr ver 2.*
Is there any way to use claymore's like before?
2- I have no problem with dev fee, so how to enable it or donate to claymore?
Unfortunately no, Unless Claymore revised his miner to support Cryptonight-Heavy Algo you cant mine Sumo with it.
my advise, use other miner out there
What other miner would you suugst to replace Claymore for the time being?
Hi, I have 2 questions
1- Since about a week ago I can't mine sumo, error message says sumo changed algo, use xmr ver 2.*
Is there any way to use claymore's like before?
2- I have no problem with dev fee, so how to enable it or donate to claymore?
1- Since about a week ago I can't mine sumo, error message says sumo changed algo, use xmr ver 2.*
Is there any way to use claymore's like before?
2- I have no problem with dev fee, so how to enable it or donate to claymore?
Unfortunately no, Unless Claymore revised his miner to support Cryptonight-Heavy Algo you cant mine Sumo with it.
my advise, use other miner out there
Hi, I have 2 questions
1- Since about a week ago I can't mine sumo, error message says sumo changed algo, use xmr ver 2.*
Is there any way to use claymore's like before?
2- I have no problem with dev fee, so how to enable it or donate to claymore?
1- Since about a week ago I can't mine sumo, error message says sumo changed algo, use xmr ver 2.*
Is there any way to use claymore's like before?
2- I have no problem with dev fee, so how to enable it or donate to claymore?
how to configure Miner to use both dual xeon 2697 v4 
Could anyone help me find out what the problem is? I'm using Windows 7 (64-bit).
V4.0 freezes with the prompt
FAST MODE ENABLED
Press "S"key for statistics.
After disabling Symantec anti-virus,
The program shows
Speed: 0 h/s, TotalHashes: OK, Mining time:
V4.0 freezes with the prompt
FAST MODE ENABLED
Press "S"key for statistics.
After disabling Symantec anti-virus,
The program shows
Speed: 0 h/s, TotalHashes: OK, Mining time:
I'm getting this error from the pool (when using the new "-pow7 1" in v4.0):
04/04/18-15:09:15 - SHARE FOUND (target 35000) - (THR 3 of 10)
Share rejected (47 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
04/04/18-15:09:29 - New job received from pool.minexmr.com:7777
Speed: 341 h/s, TotalHashes: 10K, Mining time: 00:00
04/04/18-15:09:58 - SHARE FOUND (target 35000) - (THR 9 of 10)
Share rejected (62 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
04/04/18-15:11:09 - SHARE FOUND (target 35000) - (THR 5 of 10)
Share rejected (47 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
04/04/18-15:12:53 - New job received from pool.minexmr.com:7777
Speed: 315 h/s, TotalHashes: 80K, Mining time: 00:03
04/04/18-15:12:59 - SHARE FOUND (target 35000) - (THR 4 of 10)
Share rejected (47 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
- What's the problem?
- It's all ok if I don't use the -pow7.
(The pool says "Switch to new PoW now! - Before April 6:th")
EDIT: I'm using minexmr.com on port 7777.
04/04/18-15:09:15 - SHARE FOUND (target 35000) - (THR 3 of 10)
Share rejected (47 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
04/04/18-15:09:29 - New job received from pool.minexmr.com:7777
Speed: 341 h/s, TotalHashes: 10K, Mining time: 00:00
04/04/18-15:09:58 - SHARE FOUND (target 35000) - (THR 9 of 10)
Share rejected (62 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
04/04/18-15:11:09 - SHARE FOUND (target 35000) - (THR 5 of 10)
Share rejected (47 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
04/04/18-15:12:53 - New job received from pool.minexmr.com:7777
Speed: 315 h/s, TotalHashes: 80K, Mining time: 00:03
04/04/18-15:12:59 - SHARE FOUND (target 35000) - (THR 4 of 10)
Share rejected (47 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
- What's the problem?
- It's all ok if I don't use the -pow7.
(The pool says "Switch to new PoW now! - Before April 6:th")
EDIT: I'm using minexmr.com on port 7777.
I also have. =( Maybe problem in pool proxy.
I just found out why this is:
- CPU Miner v4.0 does apparently not auto sense when to switch to the new PoW7.
You have to run it without the "-pow7 1" flag until it's time. Then restart it with the "-pow7 1" flag.
** The switch to PoW-7 will occur at block-height: 1,546,000 **
Block 1,546,000 is due to occur sometime during 6 april 2018.
You can check the current block-height at https://chainradar.com/xmr/blocks or other block explorers.
Confirmed this workaround, well works, mining away happily, now to reset because of stupid slow mode memory issue with the miner. like 32gb RAM and 128GB VM not enough for it.
Oh no, after restart its now not connecting to pool.
Im getting these same errors aswell. Hardly getting any shares at all. Its constantly looking to connect to the pool. Woth or without the -pow7 flag. Any ideas?
@Claymore please can you add -pow7 support to the v3.4 version?? or if any know a CPU miner supporting the pow7 for Windows x86.
Thanks in advance
Thanks in advance
I guess, its time to upgrade your OS, almost all miners are x64 already, its not only the miner choices that you could easily get but also to get most hash out of it
@Claymore please can you add -pow7 support to the v3.4 version?? or if any know a CPU miner supporting the pow7 for Windows x86.
Thanks in advance
Thanks in advance
I'm getting this error from the pool (when using the new "-pow7 1" in v4.0):
04/04/18-15:09:15 - SHARE FOUND (target 35000) - (THR 3 of 10)
Share rejected (47 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
04/04/18-15:09:29 - New job received from pool.minexmr.com:7777
Speed: 341 h/s, TotalHashes: 10K, Mining time: 00:00
04/04/18-15:09:58 - SHARE FOUND (target 35000) - (THR 9 of 10)
Share rejected (62 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
04/04/18-15:11:09 - SHARE FOUND (target 35000) - (THR 5 of 10)
Share rejected (47 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
04/04/18-15:12:53 - New job received from pool.minexmr.com:7777
Speed: 315 h/s, TotalHashes: 80K, Mining time: 00:03
04/04/18-15:12:59 - SHARE FOUND (target 35000) - (THR 4 of 10)
Share rejected (47 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
- What's the problem?
- It's all ok if I don't use the -pow7.
(The pool says "Switch to new PoW now! - Before April 6:th")
EDIT: I'm using minexmr.com on port 7777.
04/04/18-15:09:15 - SHARE FOUND (target 35000) - (THR 3 of 10)
Share rejected (47 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
04/04/18-15:09:29 - New job received from pool.minexmr.com:7777
Speed: 341 h/s, TotalHashes: 10K, Mining time: 00:00
04/04/18-15:09:58 - SHARE FOUND (target 35000) - (THR 9 of 10)
Share rejected (62 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
04/04/18-15:11:09 - SHARE FOUND (target 35000) - (THR 5 of 10)
Share rejected (47 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
04/04/18-15:12:53 - New job received from pool.minexmr.com:7777
Speed: 315 h/s, TotalHashes: 80K, Mining time: 00:03
04/04/18-15:12:59 - SHARE FOUND (target 35000) - (THR 4 of 10)
Share rejected (47 ms)!
{"id":4,"jsonrpc":"2.0","error":{"code":-1,"message":"Lowdifficultyshare"}}
- What's the problem?
- It's all ok if I don't use the -pow7.
(The pool says "Switch to new PoW now! - Before April 6:th")
EDIT: I'm using minexmr.com on port 7777.
I also have. =( Maybe problem in pool proxy.
I just found out why this is:
- CPU Miner v4.0 does apparently not auto sense when to switch to the new PoW7.
You have to run it without the "-pow7 1" flag until it's time. Then restart it with the "-pow7 1" flag.
** The switch to PoW-7 will occur at block-height: 1,546,000 **
Block 1,546,000 is due to occur sometime during 6 april 2018.
You can check the current block-height at https://chainradar.com/xmr/blocks or other block explorers.
Confirmed this workaround, well works, mining away happily, now to reset because of stupid slow mode memory issue with the miner. like 32gb RAM and 128GB VM not enough for it.
Oh no, after restart its now not connecting to pool.
Jump to: