Topic: Claymore's CryptoNote Windows CPU Miner v4.0 - page 8. (Read 565436 times)

Hi I went thru quite a few resources here and still unsure of the optimum -t config for my CPU.
I tried between 4, 6, 8, 16 and 33 threads but -t 4 seems to give me the highest at around 176 h/s on xmr


╔════════════════════════════════════════════════════════════════╗
║              Claymore CryptoNote CPU Miner v3.9                ║
╚════════════════════════════════════════════════════════════════╝
XMR: 1 pool is specified
Main pool is fcn-xmr.pool.minergate.com:45590
64-bit version
CPU supports AES-NI - faster mining!
Logical CPU cores: 4
Using 4 threads
scfg: 1
FAST MODE ENABLED!
1 pool specified.
Remote management (READ-ONLY MODE) is enabled on port 3333
Press "s" key for statistics.
DevFee: Stratum - connecting to 'cryptonight.usa.nicehash.com' <198.11.220.44> port 3355 (unsecure)
Stratum - connecting to 'fcn-xmr.pool.minergate.com' <138.201.124.177> port 45590 (unsecure)
Stratum - Connected (unsecure)
DevFee: Pool Diff 200008
Stratum - Connected (unsecure)
Pool Diff 1063
12/31/17-11:04:10 - SHARE FOUND (target 1063) - (THR 2 of 4)
12/31/17-11:04:10 - SHARE FOUND (target 1063) - (THR 1 of 4)
Share accepted (188 ms)!
12/31/17-11:04:17 - SHARE FOUND (target 1063) - (THR 2 of 4)
Share accepted (171 ms)!
12/31/17-11:04:19 - SHARE FOUND (target 1063) - (THR 2 of 4)
Share accepted (204 ms)!
12/31/17-11:04:24 - SHARE FOUND (target 1063) - (THR 0 of 4)
Share accepted (234 ms)!
12/31/17-11:04:27 - SHARE FOUND (target 1063) - (THR 0 of 4)
Share accepted (250 ms)!
12/31/17-11:04:43 - SHARE FOUND (target 1063) - (THR 2 of 4)
Share accepted (250 ms)!
12/31/17-11:04:53 - SHARE FOUND (target 1063) - (THR 0 of 4)
Share accepted (235 ms)!
Speed: 176 h/s, TotalHashes: 8K, DevHashes: 0K Mining time: 00:00
12/31/17-11:04:58 - SHARE FOUND (target 1063) - (THR 1 of 4)
Share accepted (235 ms)!

I'm running the Xeon Platinum 8186 (skylake) @270GHz
L2 cache 2 x 1MB 16-way
L3 cache 2 x33MB 11-way


Anyone can advise how many threads I should ideally use?


many thanks

Are there any additional drivers require? I tried to run it on various processors from i3 to i7 HQ , neither of them is doing over 110 h/s.

This is a Cryptonote miner...not ETHash

Try to use -t 4  param. I have i7-4720HQ and 16Gb RAM, which mines at about 150-200 and goes down to 110-120 when I use my computer for work (business needs, not heavy load like 3d rendering or so). So your speed is abnormal.
35-50H/s is ok for old i5-3xxx but not for your CPU

Is it possible to use this miner for solo mining?

You could up the amount of processing power you are giving. Let it run at 80-90% and youll see higher H/s rates. Wouldnt expect the world out of it though as the benchmarks ive seen show 150-200 H/s

Are you sure that "my ether wallet" is equal to "your MONERO" wallet?
Do you know that Etherium and Monero are different and use different wallets?
Or you think you can mine any crypto using one wallet?

I don't understand which wallet address to use. My command line is

NsCpuCNMiner64.exe -o stratum+tcp://mine.moneropool.com:3333 -u 449TGay4WWJPwsXrWZfkMoPtDbJp8xoSzFuyjRt3iaM4bRHdzw4qoDu26FdcGx67BMDS1r2bnp7f5hF 6xdPWWrD3Q3Wf7G6 -p x -t 3

And it works fine. But I think that I am mining for the developer. If I change the "449TGay..." key for my address on "my ether wallet" the program returns an error of "invalidaddressusedforlogin".

It returns the same error on other pools using my address, but works fine with the 449TGay... address.

Please let me know what I am doing wrong.

Thanks for your help

I am asking about exact model, but not GHz. Like i7-7700K etc.

Well, I've tried 3 other pools all with the same result.  (US West Nanopool, us-east.cryptonight-hub.miningpoolhub.com, stratum+tcp://mine.moneropool.org)  Still nothing.

EDIT: Just tried "us-east.cryptonight-hub.miningpoolhub.com:20580", but I get the error:

Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidusernameusedforlogin"}}
Stratum - reading socket failed 10038, disconnect
 Job timeout, disconnect, retry in 10 sec...


2nd EDIT: Reading through this thread from beginning to end (only 1/4th the way thus far), I found that I can mine Monero using the server mine.moneropool.com:3334

However, I want to mine Ethereum and can't seem to connect to the nanopool servers to mine.  

Is anyone using Claymore CPU to mine ethereum and if so, what are your settings?

Looks like it is a pool issue. Try another pool to see if you can connect.

Having problems, wondering if someone might help.  If I try to run the .bat file as an administrator, the command prompt window opens and then shuts immediately. 

If I run the .bat file normally, the output I receive is:

04:39:23:736   24ac   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
04:39:23:736   24ac   º              Claymore CryptoNote CPU Miner v3.9                º
04:39:23:736   24ac   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
04:39:23:983   24ac   XMR: 1 pool is specified
04:39:23:983   24ac   Main pool is eth-us-east1.nanopool.org:9999
04:39:23:983   24ac   64-bit version
04:39:23:998   24ac   CPU supports AES-NI - faster mining!
04:39:23:998   24ac   Logical CPU cores: 8
04:39:23:998   24ac   Using 4 threads
04:39:24:014   24ac   scfg: 0
04:39:39:026   24ac   No AMD cards in the list, ADL library will not be used.
04:39:39:056   24ac   1 pool specified.
04:39:39:061   24ac   Remote management (READ-ONLY MODE) is enabled on port 3333
04:39:39:066   24ac   Press "s" key for statistics.
04:39:39:129   15ec   Stratum - connecting to 'eth-us-east1.nanopool.org' <142.44.242.100> port 9999 (unsecure)
04:39:39:149   5c0   DevFee: Stratum - connecting to 'xmr.suprnova.cc' <145.239.65.23> port 5222 (unsecure)
04:39:39:223   15ec   send: {"method": "login", "params": {"login": "[my public wallet address]", "pass": "x", "agent": "xmr/1.0"}, "id": 1}
04:39:39:229   15ec   Stratum - Connected (unsecure)
04:39:39:234   15ec   New connection: reset total hashes counters
04:39:39:316   5c0   send: {"method": "login", "params": {"login": "claymore.cnfee", "pass": "x", "agent": "xmr/1.0"}, "id": 1}
04:39:39:321   5c0   Stratum - Connected (unsecure)
04:39:39:479   15ec   socket was closed remotely
04:39:39:484   15ec    Job timeout, disconnect, retry in 20 sec...


Bat file text is:
NsCpuCNMiner64.exe -t 4 -o eth-us-east1.nanopool.org:9999 -u [public wallet address] -p x -allpools 1

Any ideas?

Reboot your PC before starting miner...you probably got miner crashed, tried to restart, but
monitoring port stayed bound to previous attempt

When i start cpu miner i keep getting this red lines and i dont understand it
https://ibb.co/gOXbvR

Maybe your AV software stops it (windows defender, maybe)? It happened to me on some GPU miners

I'm wondering what is wattage usage when you mine monero with CPU? Is it profitable at 0.13 cents per kw?

You probably made a mistake in your configuration. Can u please post your config?

hi
i used ver 3.8 for few days and it worked fine and suddenly i get this error every time i try to use it
i tried ver 3.9 and it still not working (i use it for etn farming)
https://ibb.co/fJWos6

Hi,

I try this new version, that should be better than the older, but I loose more or less 100H/s. I'm working on XMR.

I use the nanopool 10.2 beta version for now, and I can reach better performances with my R9 390. Someone had this issue? Some stuff to set?

Thx !

Intel i5, 3rd Gen, states 1.7ghz, with "Turbo Boost" to 2.6ghz.