try 14.7 version
Same issues .... With phoenix miner doesnt give me that issues . 
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 107. (Read 6590757 times)
June 29, 2019, 06:20:01 PM
June 29, 2019, 04:05:18 PM
i found a bug in your miner ... https://imgur.com/a/k5Nw9k3 and he still staying like this , i have to go to the rig and reset manually ...
June 29, 2019, 02:26:33 PM
fminer thread hangs
today in all my rigs any ideas?
today in all my rigs any ideas?
June 29, 2019, 08:46:53 AM
CLAYMORE STUCK AFTER START
Who is the magic wizard that can help me out,
I have been going to all posts, but I cant get a suitable solution for my problem with Claymore 12.0. Tried everything.
Later versions of claymore give me the Can not create DAG file, problem. Which is said to be a virt mem problem. (i ve put the virt mem to even 50GB, and even tried 80GB) went throught the CHKDSK /f /r solutions and sata AHCI controller driver solutions.
Or I get a video TDR failure, which should be a driver issue.
I cant figure out why half of my miners suddenly are stuck... and the rest are working fine... ? exactelly same BIOS setup, same CPU, same DDR. Both miners are in every way: an exact clone.
Throuble shooting:
swapped all risers with GPUs from the working one to the one that stucks.
i went through BIOS, 4G is on. tried GEN1 and GEN2....GEN AUTO (the working miner is actually even on GEN AUTO)
But...
So when i swap the SSD only from the working RIG to the exact same RIG, that isnt working... claymore gets stuck again....
Tried to restart / reload windows 6 times.
With first having 1 GPU, and adding everytime an extra one.
I have a 6 GPU 1080TI card, with the latest Nvidia drivers installed, (used DDU, took the Latest Nvidea driver, and as well tried 425.1 and 430.86)
Asrock BTC pro 2.0 board latest Bios update with the 4g decoding option which is ON) , with 16GB DDR, intel i5 4core processor. 256 samsung EVO SSD.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0xc20ca97592ecfbd89a86df556b7784376a672e30.miner1 -epsw x -dpool stratum+tcp://lbry.suprnova.cc:6256 -dwal my.miner1 1 -dpsw x -dcoin lbc
what on earth can it be? what am i over seeing wrong for the last weeks?
wont make sence why same hardware works with one miner and not with the other one. I tried swappin SSD, or cloning an IMG file.
additional info:
Thanks a lot for the reply,
I am Running on windows
I have not (yet) any afterburner installed. i am not overclocking and have the full power (1600W ) available
Claymore 12.0
When i run claymore 12.0 , its finds the pool and after create DAG for each GPU, the screen freezes, and i have to manually (swich of power) restart
when i wait longer i get the blue windows screen DPC watchdog violation
Claymore 14.7
When i run claymore 14.7 , its is running bit better, One of the GPU s (sometime GPU4 and somethimes GPU 3) is on 0
NVML: can not get current temperature error 15.
then it reboots with one GPU less.
Any help Would be Appreciated, and rewarded from my side!!
thanks in advance
Who is the magic wizard that can help me out,
I have been going to all posts, but I cant get a suitable solution for my problem with Claymore 12.0. Tried everything.
Later versions of claymore give me the Can not create DAG file, problem. Which is said to be a virt mem problem. (i ve put the virt mem to even 50GB, and even tried 80GB) went throught the CHKDSK /f /r solutions and sata AHCI controller driver solutions.
Or I get a video TDR failure, which should be a driver issue.
I cant figure out why half of my miners suddenly are stuck... and the rest are working fine... ? exactelly same BIOS setup, same CPU, same DDR. Both miners are in every way: an exact clone.
Throuble shooting:
swapped all risers with GPUs from the working one to the one that stucks.
i went through BIOS, 4G is on. tried GEN1 and GEN2....GEN AUTO (the working miner is actually even on GEN AUTO)
But...
So when i swap the SSD only from the working RIG to the exact same RIG, that isnt working... claymore gets stuck again....
Tried to restart / reload windows 6 times.
With first having 1 GPU, and adding everytime an extra one.
I have a 6 GPU 1080TI card, with the latest Nvidia drivers installed, (used DDU, took the Latest Nvidea driver, and as well tried 425.1 and 430.86)
Asrock BTC pro 2.0 board latest Bios update with the 4g decoding option which is ON) , with 16GB DDR, intel i5 4core processor. 256 samsung EVO SSD.
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0xc20ca97592ecfbd89a86df556b7784376a672e30.miner1 -epsw x -dpool stratum+tcp://lbry.suprnova.cc:6256 -dwal my.miner1 1 -dpsw x -dcoin lbc
what on earth can it be? what am i over seeing wrong for the last weeks?
wont make sence why same hardware works with one miner and not with the other one. I tried swappin SSD, or cloning an IMG file.
additional info:
Thanks a lot for the reply,
I am Running on windows
I have not (yet) any afterburner installed. i am not overclocking and have the full power (1600W ) available
Claymore 12.0
When i run claymore 12.0 , its finds the pool and after create DAG for each GPU, the screen freezes, and i have to manually (swich of power) restart
when i wait longer i get the blue windows screen DPC watchdog violation
Claymore 14.7
When i run claymore 14.7 , its is running bit better, One of the GPU s (sometime GPU4 and somethimes GPU 3) is on 0
NVML: can not get current temperature error 15.
then it reboots with one GPU less.
Any help Would be Appreciated, and rewarded from my side!!
thanks in advance
I have almost same problem. My rig was worked fine about 1week. Later something went wrong... I started search why my pc don't see only 6gpu of 7. Started to check cables, and found that cable which goes from psu to riser burned one contactor of six. Ok I thought maybe it's because I using cable for more then one year. I plug it to other psu place and turned on with -starp 1. Again my rig started work well but only about one hour and again it started to restart and again one gpu lost. Again checked cable and again same problem. Then I tried again to change in psu cable place and turned on rig without -strap function and currently everything is ok. I am not sure but I think something not so good with that -strap function. My rig working on two psu which is corsair RM850X. Have someone same issue?
Thank a lot!
June 29, 2019, 08:25:43 AM
this happening today in all my rigs exactly 20 min loop and restart again...
clay 14.7 and 11.7 failing too
08:54:30:936 da0 ETH: 06/29/19-08:54:30 - New job from us1.ethermine.org:4444
08:54:30:937 da0 target: 0x0000000112e0be82 (diff: 4000MH), epoch 268(3.09GB)
08:54:30:938 da0 ETH - Total Speed: 23.959 Mh/s, Total Shares: 9, Rejected: 0, Time: 00:20
08:54:30:939 da0 ETH: GPU0 23.959 Mh/s
08:54:31:419 16b8 watchdog - fminer thread hangs
08:54:31:420 16b8 em hbt: 0, fm hbt: 182125,
08:54:31:421 16b8 Miner thread hangs, need to restart miner!
08:54:31:422 16b8 Rebooting
08:54:31:423 1c40 server: accept failed with error: 10004
08:54:31:523 da0 buf: {"id":0,"jsonrpc":"2.0","result":["0x65dd927ad6b578a31bcf50ce59333b0a80dd840ca0ba370b765a617422223c08","0xb7781db17c162df6a1ec6a368fe9f1","0x0000000112e02e62d01511f12a60693e70e52ba","0x7ae0c5"]}
08:54:31:524 da0 ETH: 06/29/19-08:54:31 - New job from us1.ethermine.org:4444
08:54:31:524 da0 target: 0x0000000112e0be82 (diff: 4000MH), epoch 268(3.09GB)
08:54:31:525 da0 ETH - Total Speed: 23.959 Mh/s, Total Shares: 9, Rejected: 0, Time: 00:20
08:54:31:526 da0 ETH: GPU0 23.959 Mh/s
08:54:31:635 da0 buf: {"id":0,"jsonrpc":"2.0","result":["0x3e57bdcc57631e4e667dd4aec7c8adc9936585f79bc3378c11e2acd6adac605","0xb7781db17c1dd439b3c01679985ff68fe9f1","0x0000000112e0be826d694b2e62d01511f12a601fbaec8bc02357593e70e52ba","0x7ae0c5"]}
08:54:31:636 da0 ETH: 06/29/19-08:54:31 - New job from us1.ethermine.org:4444
08:54:31:636 da0 target: 0x0000000112e0be82 (diff: 4000MH), epoch 268(3.09GB)
08:54:31:637 da0 ETH - Total Speed: 23.959 Mh/s, Total Shares: 9, Rejected: 0, Time: 00:20
08:54:31:638 da0 ETH: GPU0 23.959 Mh/s
08:54:31:825 23d4 Quit, please wait...
clay 14.7 and 11.7 failing too
08:54:30:936 da0 ETH: 06/29/19-08:54:30 - New job from us1.ethermine.org:4444
08:54:30:937 da0 target: 0x0000000112e0be82 (diff: 4000MH), epoch 268(3.09GB)
08:54:30:938 da0 ETH - Total Speed: 23.959 Mh/s, Total Shares: 9, Rejected: 0, Time: 00:20
08:54:30:939 da0 ETH: GPU0 23.959 Mh/s
08:54:31:419 16b8 watchdog - fminer thread hangs
08:54:31:420 16b8 em hbt: 0, fm hbt: 182125,
08:54:31:421 16b8 Miner thread hangs, need to restart miner!
08:54:31:422 16b8 Rebooting
08:54:31:423 1c40 server: accept failed with error: 10004
08:54:31:523 da0 buf: {"id":0,"jsonrpc":"2.0","result":["0x65dd927ad6b578a31bcf50ce59333b0a80dd840ca0ba370b765a617422223c08","0xb7781db17c162df6a1ec6a368fe9f1","0x0000000112e02e62d01511f12a60693e70e52ba","0x7ae0c5"]}
08:54:31:524 da0 ETH: 06/29/19-08:54:31 - New job from us1.ethermine.org:4444
08:54:31:524 da0 target: 0x0000000112e0be82 (diff: 4000MH), epoch 268(3.09GB)
08:54:31:525 da0 ETH - Total Speed: 23.959 Mh/s, Total Shares: 9, Rejected: 0, Time: 00:20
08:54:31:526 da0 ETH: GPU0 23.959 Mh/s
08:54:31:635 da0 buf: {"id":0,"jsonrpc":"2.0","result":["0x3e57bdcc57631e4e667dd4aec7c8adc9936585f79bc3378c11e2acd6adac605","0xb7781db17c1dd439b3c01679985ff68fe9f1","0x0000000112e0be826d694b2e62d01511f12a601fbaec8bc02357593e70e52ba","0x7ae0c5"]}
08:54:31:636 da0 ETH: 06/29/19-08:54:31 - New job from us1.ethermine.org:4444
08:54:31:636 da0 target: 0x0000000112e0be82 (diff: 4000MH), epoch 268(3.09GB)
08:54:31:637 da0 ETH - Total Speed: 23.959 Mh/s, Total Shares: 9, Rejected: 0, Time: 00:20
08:54:31:638 da0 ETH: GPU0 23.959 Mh/s
08:54:31:825 23d4 Quit, please wait...
June 29, 2019, 05:46:37 AM
under linux: why cant my 2080 mine ethash under claymore? see error in screenshot. i tried 2 2080 and 3 different linux os all of them have same error
https://ibb.co/VvNmLbT
https://ibb.co/VvNmLbT
June 29, 2019, 04:08:45 AM
Using -strap results in the following error and straps not being applied:
Wrong driver version, trying to uninstall it and install correct version...
The boot configuration data store could not be opened.
Acces is denied.
Failed, you must run miner with admin rights.
When I run claymore as admin I get the following error:
ethdcrminer64.exe' is not recognized as an internal or external command
Miner works just fine when ran normaly except that I cant use -strap / -rxboost.
Installed latest gpu drivers but it still doesnt work.
Wrong driver version, trying to uninstall it and install correct version...
The boot configuration data store could not be opened.
Acces is denied.
Failed, you must run miner with admin rights.
When I run claymore as admin I get the following error:
ethdcrminer64.exe' is not recognized as an internal or external command
Miner works just fine when ran normaly except that I cant use -strap / -rxboost.
Installed latest gpu drivers but it still doesnt work.
right click claymore exe
then properties
and tick run as administrator
now execute the bat file and it should run without any problems
June 29, 2019, 01:51:45 AM
Using -strap results in the following error and straps not being applied:
Wrong driver version, trying to uninstall it and install correct version...
The boot configuration data store could not be opened.
Acces is denied.
Failed, you must run miner with admin rights.
When I run claymore as admin I get the following error:
ethdcrminer64.exe' is not recognized as an internal or external command
Miner works just fine when ran normaly except that I cant use -strap / -rxboost.
Installed latest gpu drivers but it still doesnt work.
Wrong driver version, trying to uninstall it and install correct version...
The boot configuration data store could not be opened.
Acces is denied.
Failed, you must run miner with admin rights.
When I run claymore as admin I get the following error:
ethdcrminer64.exe' is not recognized as an internal or external command
Miner works just fine when ran normaly except that I cant use -strap / -rxboost.
Installed latest gpu drivers but it still doesnt work.
right click claymore exe
then properties
and tick run as administrator
now execute the bat file and it should run without any problems
June 28, 2019, 07:51:01 PM
Hi guys,
I've been using Claymore for a number of years through various versions. But I have recently noticed with the recent releases that after a day or so of mining my effective rate starts to drops off (the reported hashrate is fine). The effective is often around 10% lower than reported. If I restart the miner my effective rate promptly shoots back up to reported quickly until another day or so then drops off. The recovery is almost immediate.
I get the recovery if I just restart Claymore but a computer restart also does it (i.e. it is a restart of Claymore that is fixing it, not the computer restart).
Has anyone encountered this?
I'm running 14.6, a bunch of RXs, Win10, latest Radeon drivers, compute mode, using my own straps (I couldn't get any better using the rxboost, etc.). Nothing is running too hot.
Thanks
I've been using Claymore for a number of years through various versions. But I have recently noticed with the recent releases that after a day or so of mining my effective rate starts to drops off (the reported hashrate is fine). The effective is often around 10% lower than reported. If I restart the miner my effective rate promptly shoots back up to reported quickly until another day or so then drops off. The recovery is almost immediate.
I get the recovery if I just restart Claymore but a computer restart also does it (i.e. it is a restart of Claymore that is fixing it, not the computer restart).
Has anyone encountered this?
I'm running 14.6, a bunch of RXs, Win10, latest Radeon drivers, compute mode, using my own straps (I couldn't get any better using the rxboost, etc.). Nothing is running too hot.
Thanks
June 28, 2019, 03:08:07 PM
Testing 12* rx 580 xfx on asrock h110 btc pro+
I have same configurations asrocks with xfx 580, 570 and sapphire 580. all *12. and they are crashing. I'm using on these rigs rxboost
on asus z270p with p106-100*8 strap works, but I have another problem on that rig. i can use Nvidia driver 382.53 and miner 10.6, when i upgrade drivers or miners to 11.x or 14.x - mining stops after 10-20 minutes
June 28, 2019, 12:48:12 PM
Using -strap results in the following error and straps not being applied:
Wrong driver version, trying to uninstall it and install correct version...
The boot configuration data store could not be opened.
Acces is denied.
Failed, you must run miner with admin rights.
When I run claymore as admin I get the following error:
ethdcrminer64.exe' is not recognized as an internal or external command
Miner works just fine when ran normaly except that I cant use -strap / -rxboost.
Installed latest gpu drivers but it still doesnt work.
Wrong driver version, trying to uninstall it and install correct version...
The boot configuration data store could not be opened.
Acces is denied.
Failed, you must run miner with admin rights.
When I run claymore as admin I get the following error:
ethdcrminer64.exe' is not recognized as an internal or external command
Miner works just fine when ran normaly except that I cant use -strap / -rxboost.
Installed latest gpu drivers but it still doesnt work.
June 28, 2019, 02:12:57 AM
I got some improve on my hash rate speed. Before it usually used to work at 177Mh/s and now 188Mh/s.
I did the same config for the 3 rigs I have and the total gain was 30Mh/s it is like I have gotten another GPU
However I'm gonna monitor my graph on the pool and see if I really had some gain... Let's see!!
- 17 Cards are Asus Radeon RX 580 OC 4GB - samsung memory
- 1 Card is Asus Radeon RX 580 OC 4GB - elpida memory
For me -strap and -rxboost were waste of time. They really increased the hash rate, but I was getting too much:
"GPU #0 got incorrect share. If you see this warning often, make sure you did not overclock it too much!"
So the hash rate reported by the pool decreased a little.
I was using:
-strap 2
-rxboost 21
And undervolting and overclocking with OverDriveNTool
-cvddc 870
-mvddc 850
-cclock 1170
-mclock 2010
I did the same config for the 3 rigs I have and the total gain was 30Mh/s it is like I have gotten another GPU
However I'm gonna monitor my graph on the pool and see if I really had some gain... Let's see!!
- 17 Cards are Asus Radeon RX 580 OC 4GB - samsung memory
- 1 Card is Asus Radeon RX 580 OC 4GB - elpida memory
For me -strap and -rxboost were waste of time. They really increased the hash rate, but I was getting too much:
"GPU #0 got incorrect share. If you see this warning often, make sure you did not overclock it too much!"
So the hash rate reported by the pool decreased a little.
I was using:
-strap 2
-rxboost 21
And undervolting and overclocking with OverDriveNTool
-cvddc 870
-mvddc 850
-cclock 1170
-mclock 2010
your vents won't last long on ~100% fan speed
it's better to install some additional vents for a decent airflow on your rig
something like this ->
June 28, 2019, 12:08:36 AM
So do I.
My rig with Asrock h110 btc pro+ does get stuck and reboot when claymore try to apply mem strap to 3rd gpu.
However, rig with Asus BTC+ 19 pcie works fine with strap.
I had the same.issue..didn't solve it - went another route, but the documentation says that some straps at higher memory.clocks crash. Did you try low clocks on failing cards with each of the different straps? If not, try that and work your way up till crash.
Yes i tried stock memory clock i tried another gpu bios i tried stock bios i tried all the straps - strap 1 2 3 4 5 6 seem to be when the miner is identifying the card for example
I see the line
POL8S1
POL8S2
And crash
Seem to be a problem with the motherboard because i have another rigs with the same gpu but the motherboard is asus And works perfect i tried upgrading the motherboard bios And the same issue, however without the - strap works perfect
Testing 12* rx 580 xfx on asrock h110 btc pro+
My rig with Asrock h110 btc pro+ does get stuck and reboot when claymore try to apply mem strap to 3rd gpu.
However, rig with Asus BTC+ 19 pcie works fine with strap.
Hi guys i have a issue with my 13 gpus rig running claymore 14.7, when i apply -strap to the 1st and 2nd card everything fine but when i tried to apply to the 3rd or any next windows crash bsod "system service exception" i tried everything i tested the gpus on another rig i have a asrock h110 btc pro, i tried new drivers new windows please help
I had the same.issue..didn't solve it - went another route, but the documentation says that some straps at higher memory.clocks crash. Did you try low clocks on failing cards with each of the different straps? If not, try that and work your way up till crash.
Yes i tried stock memory clock i tried another gpu bios i tried stock bios i tried all the straps - strap 1 2 3 4 5 6 seem to be when the miner is identifying the card for example
I see the line
POL8S1
POL8S2
And crash
Seem to be a problem with the motherboard because i have another rigs with the same gpu but the motherboard is asus And works perfect i tried upgrading the motherboard bios And the same issue, however without the - strap works perfect
Testing 12* rx 580 xfx on asrock h110 btc pro+
June 27, 2019, 06:59:23 PM
Hi guys i have a issue with my 13 gpus rig running claymore 14.7, when i apply -strap to the 1st and 2nd card everything fine but when i tried to apply to the 3rd or any next windows crash bsod "system service exception" i tried everything i tested the gpus on another rig i have a asrock h110 btc pro, i tried new drivers new windows please help
I had the same.issue..didn't solve it - went another route, but the documentation says that some straps at higher memory.clocks crash. Did you try low clocks on failing cards with each of the different straps? If not, try that and work your way up till crash.
Yes i tried stock memory clock i tried another gpu bios i tried stock bios i tried all the straps - strap 1 2 3 4 5 6 seem to be when the miner is identifying the card for example
I see the line
POL8S1
POL8S2
And crash
Seem to be a problem with the motherboard because i have another rigs with the same gpu but the motherboard is asus And works perfect i tried upgrading the motherboard bios And the same issue, however without the - strap works perfect
Testing 12* rx 580 xfx on asrock h110 btc pro+
June 27, 2019, 12:57:22 PM
Hi guys i have a issue with my 13 gpus rig running claymore 14.7, when i apply -strap to the 1st and 2nd card everything fine but when i tried to apply to the 3rd or any next windows crash bsod "system service exception" i tried everything i tested the gpus on another rig i have a asrock h110 btc pro, i tried new drivers new windows please help
I had the same.issue..didn't solve it - went another route, but the documentation says that some straps at higher memory.clocks crash. Did you try low clocks on failing cards with each of the different straps? If not, try that and work your way up till crash.
June 27, 2019, 12:49:57 PM
Hi guys i have a issue with my 13 gpus rig running claymore 14.7, when i apply -strap to the 1st and 2nd card everything fine but when i tried to apply to the 3rd or any next windows crash bsod "system service exception" i tried everything i tested the gpus on another rig i have a asrock h110 btc pro, i tried new drivers new windows please help
June 27, 2019, 09:36:58 AM
Hi all, geting about 11-13 mh , 488 card letest drivers , any idea ?
Press "Y" key during mining and than restart computer. June 27, 2019, 09:18:38 AM
Hi all, geting about 11-13 mh , 488 card letest drivers , any idea ?
June 27, 2019, 08:26:49 AM
I got some improve on my hash rate speed. Before it usually used to work at 177Mh/s and now 188Mh/s.
I did the same config for the 3 rigs I have and the total gain was 30Mh/s it is like I have gotten another GPU
However I'm gonna monitor my graph on the pool and see if I really had some gain... Let's see!!
- 17 Cards are Asus Radeon RX 580 OC 4GB - samsung memory
- 1 Card is Asus Radeon RX 580 OC 4GB - elpida memory
I did the same config for the 3 rigs I have and the total gain was 30Mh/s it is like I have gotten another GPU
However I'm gonna monitor my graph on the pool and see if I really had some gain... Let's see!!
- 17 Cards are Asus Radeon RX 580 OC 4GB - samsung memory
- 1 Card is Asus Radeon RX 580 OC 4GB - elpida memory
For me -strap and -rxboost were waste of time. They really increased the hash rate, but I was getting too much:
"GPU #0 got incorrect share. If you see this warning often, make sure you did not overclock it too much!"
So the hash rate reported by the pool decreased a little.
I was using:
-strap 2
-rxboost 21
And undervolting and overclocking with OverDriveNTool
-cvddc 870
-mvddc 850
-cclock 1170
-mclock 2010
Too much undervolt for memory... dont touch memory voltage at all
He needs try to raise both voltages a bit.
F.e., 1st try to set cvddc 900 and leave mvddc 850. If incorrect shares stays than try to set cvddc - 875 and mvddc 875.
P.S. 870mV - not correct voltage. As I know on RX cards cvddc must be step by 6 or 7 mV (25/4). Correct voltages are 800, 806, 812, 818, 825, 831, 837, 843, 850, 856, 863, 868, 875, etc. Memory voltages is step by 25 - 800, 825, 850, 875. etc.
I tried to set other values for cvddc but all monitoring utils shows close voltages to setted.
If set 870 mV - it will be 868 or 875 but not 870.
June 27, 2019, 07:09:33 AM
Hi,
What is the latest Dev fee for v14.7?
This miner is free-to-use, however, current developer fee is 1%, every hour the miner mines for 36 seconds for developer.What is the latest Dev fee for v14.7?
For all 2GB cards and 3GB cards devfee is 0%, so on these cards you can mine all ETH forks without devfee, this miner is completely free in this case.
If some cards are 2...3GB and some >3GB, 2...3GB cards still mine for you during devfee time, only cards that have more than 3GB memory will be used for devfee mining. Miner displays appropriate messages during startup.
Second coin (Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak) is mined without developer fee.
So the developer fee is 0...1%, if you don't agree with the dev fee - don't use this miner, or use "-nofee" option.
Attempts to cheat and remove dev fee will cause a bit slower mining speed (same as "-nofee 1") though miner will show same hashrate.
Miner cannot just stop if cheat is detected because creators of cheats would know that the cheat does not work and they would find new tricks. If miner does not show any errors or slowdowns, they are happy.
Thank you
Jump to: