Hi, guys,
Am I the only one that gets lots of "Incorrect ETH shares" (that message in the red).
The strange think is that it happens to 1 or 2 cards on a rig with 7 identical cards. Totally on 6 cards in 4 rigs.
And even stranger is that on 11.0/11.9 (previous versions I used) - there is no such problem. I haven't changed anything but the miner (clocks remain the same).
Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 110. (Read 6590565 times)
June 20, 2019, 08:46:55 AM
June 19, 2019, 09:16:56 PM
Can current graphics cards with 3G Vram mine ETC (EthereumClassic) (GTX 1060 3G , p106-090 3G,v.v...)
Thank you.
Thank you.
June 19, 2019, 06:50:10 PM
I have a request, it is possible to make the display of statistics on hashes and watts in a column by pressing S. Very much inconvenient list is all.
http://i.piccy.info/i9/38a1b48fde6c3c6812014e686ba37bab/1560985244/85539/1296793/Screenshot_4.png
http://i.piccy.info/i9/38a1b48fde6c3c6812014e686ba37bab/1560985244/85539/1296793/Screenshot_4.png
June 19, 2019, 03:34:22 PM
Hi.
Having an issue on 14.7. Miner crashes after a few second and now just down to testing one card at the time. Mix rig Vega and RX580. Windows. The hashrate on the RX580 is 32+ for a few seconds and then down to zero. Using -rxboost and -strap. Tried different straps (1,2,3 etc.) but still the same. Anyone?
Having an issue on 14.7. Miner crashes after a few second and now just down to testing one card at the time. Mix rig Vega and RX580. Windows. The hashrate on the RX580 is 32+ for a few seconds and then down to zero. Using -rxboost and -strap. Tried different straps (1,2,3 etc.) but still the same. Anyone?
Code:
21:28:05:858 19fc ETH: 06/19/19-21:28:05 - New job from eu1.ethermine.org:5555
21:28:05:863 19fc target: 0x0000000112e0be82 (diff: 4000MH), epoch 266(3.08GB)
21:28:05:869 19fc ETH - Total Speed: 32.430 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
21:28:05:875 19fc ETH: GPU0 32.430 Mh/s
21:28:06:755 1774 GPU 0 temp = 54, old fan speed = 0, new fan speed = 70
21:28:09:716 19fc buf: {"id":0,"jsonrpc":"2.0","result":["0x7711ece86dabe9d808907d5f38bc0bc1f3efde64d2fe6997b285419dfe051903","0xec84f29d37543c5182d1151bd4ca723031ba8134071799e201c0ed2ff14295fd","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x79ed50"]}
21:28:09:724 19fc ETH: 06/19/19-21:28:09 - New job from eu1.ethermine.org:5555
21:28:09:729 19fc target: 0x0000000112e0be82 (diff: 4000MH), epoch 266(3.08GB)
21:28:09:734 19fc ETH - Total Speed: 32.430 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
21:28:09:740 19fc ETH: GPU0 32.430 Mh/s
21:28:09:767 1774 GPU 0 temp = 54, old fan speed = 0, new fan speed = 70
21:28:12:785 1774 GPU 0 temp = 53, old fan speed = 0, new fan speed = 70
21:28:13:321 19fc ETH: checking pool connection...
21:28:13:325 19fc sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
21:28:13:383 19fc buf: {"id":0,"jsonrpc":"2.0","result":["0x7711ece86dabe9d808907d5f38bc0bc1f3efde64d2fe6997b285419dfe051903","0xec84f29d37543c5182d1151bd4ca723031ba8134071799e201c0ed2ff14295fd","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x79ed50"]}
21:28:13:673 19fc buf: {"id":0,"jsonrpc":"2.0","result":["0xb78c6f10a67465a187452fe6caa847409287af9ecb283d83a0759c3a024746da","0xec84f29d37543c5182d1151bd4ca723031ba8134071799e201c0ed2ff14295fd","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x79ed50"]}
21:28:13:681 19fc ETH: 06/19/19-21:28:13 - New job from eu1.ethermine.org:5555
21:28:13:687 19fc target: 0x0000000112e0be82 (diff: 4000MH), epoch 266(3.08GB)
21:28:13:694 19fc ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
21:28:13:700 19fc ETH: GPU0 0.000 Mh/s
21:28:15:485 1488 GPU 0 temp = 54, old fan speed = 0, new fan speed = 70
21:28:15:487 1940 em hbt: 31, fm hbt: 78,
21:28:15:492 1940 watchdog - thread 0 (gpu0), hb time 10515
21:28:15:495 1940 watchdog - thread 1 (gpu0), hb time 10812
21:28:15:593 1488 Quit, please wait...
21:28:05:863 19fc target: 0x0000000112e0be82 (diff: 4000MH), epoch 266(3.08GB)
21:28:05:869 19fc ETH - Total Speed: 32.430 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
21:28:05:875 19fc ETH: GPU0 32.430 Mh/s
21:28:06:755 1774 GPU 0 temp = 54, old fan speed = 0, new fan speed = 70
21:28:09:716 19fc buf: {"id":0,"jsonrpc":"2.0","result":["0x7711ece86dabe9d808907d5f38bc0bc1f3efde64d2fe6997b285419dfe051903","0xec84f29d37543c5182d1151bd4ca723031ba8134071799e201c0ed2ff14295fd","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x79ed50"]}
21:28:09:724 19fc ETH: 06/19/19-21:28:09 - New job from eu1.ethermine.org:5555
21:28:09:729 19fc target: 0x0000000112e0be82 (diff: 4000MH), epoch 266(3.08GB)
21:28:09:734 19fc ETH - Total Speed: 32.430 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
21:28:09:740 19fc ETH: GPU0 32.430 Mh/s
21:28:09:767 1774 GPU 0 temp = 54, old fan speed = 0, new fan speed = 70
21:28:12:785 1774 GPU 0 temp = 53, old fan speed = 0, new fan speed = 70
21:28:13:321 19fc ETH: checking pool connection...
21:28:13:325 19fc sent: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}
21:28:13:383 19fc buf: {"id":0,"jsonrpc":"2.0","result":["0x7711ece86dabe9d808907d5f38bc0bc1f3efde64d2fe6997b285419dfe051903","0xec84f29d37543c5182d1151bd4ca723031ba8134071799e201c0ed2ff14295fd","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x79ed50"]}
21:28:13:673 19fc buf: {"id":0,"jsonrpc":"2.0","result":["0xb78c6f10a67465a187452fe6caa847409287af9ecb283d83a0759c3a024746da","0xec84f29d37543c5182d1151bd4ca723031ba8134071799e201c0ed2ff14295fd","0x0000000112e0be826d694b2e62d01511f12a6061fbaec8bc02357593e70e52ba","0x79ed50"]}
21:28:13:681 19fc ETH: 06/19/19-21:28:13 - New job from eu1.ethermine.org:5555
21:28:13:687 19fc target: 0x0000000112e0be82 (diff: 4000MH), epoch 266(3.08GB)
21:28:13:694 19fc ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
21:28:13:700 19fc ETH: GPU0 0.000 Mh/s
21:28:15:485 1488 GPU 0 temp = 54, old fan speed = 0, new fan speed = 70
21:28:15:487 1940 em hbt: 31, fm hbt: 78,
21:28:15:492 1940 watchdog - thread 0 (gpu0), hb time 10515
21:28:15:495 1940 watchdog - thread 1 (gpu0), hb time 10812
21:28:15:593 1488 Quit, please wait...
June 19, 2019, 12:45:39 PM
Hello guys i need help,
I try to solomining with this software. I have AMD GPU and i can't do it.
It's all time write :
Yes in the .conf i have add my username, etcc..
Any idea ?
See my line :
Of course i have try : 192.168.0.1 or 192.168.1.13 (my IP local)
Second question, it's possible to mining only one currency without ETH ? Not dual mining ? or its obligate ?
Thanks for your help
I try to solomining with this software. I have AMD GPU and i can't do it.
It's all time write :
Code:
B2S: http error #22.
B2S: Check username and password, and/or pool state.
B2S: Failed to connect to pool (127.0.0.1:13143), retry in 10 sec...
B2S: Check username and password, and/or pool state.
B2S: Failed to connect to pool (127.0.0.1:13143), retry in 10 sec...
Yes in the .conf i have add my username, etcc..
Any idea ?
See my line :
Code:
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal MYWALLET -di 0 -dpool http://127.0.0.1:13143 -dwal test -dpsw abcd -dcoin blake2s
pause
pause
Of course i have try : 192.168.0.1 or 192.168.1.13 (my IP local)
Second question, it's possible to mining only one currency without ETH ? Not dual mining ? or its obligate ?
Thanks for your help
June 19, 2019, 10:38:59 AM
Hi guys, i have new card Radeon VII, mines just fine with Claymore v14.7 @ 95-96 Mh/s with 65 degrees celsius but i cannot control the FANS of that card. Always works at 100%.
Tried everything - with AMD Global WattMan settings /cannot control from there, always going back to default settings/, with Afterburner is the same.
Please help urgent! Thank you in advance!
Tried everything - with AMD Global WattMan settings /cannot control from there, always going back to default settings/, with Afterburner is the same.
Please help urgent! Thank you in advance!
If fan control doesn't work with Global Wattman or Afterburner while the miner is not running, then your problems lie elsewhere. Did you try latest drivers?
Yes, the latest drivers - 19.6.2
June 19, 2019, 10:20:25 AM
Hi guys, i have new card Radeon VII, mines just fine with Claymore v14.7 @ 95-96 Mh/s with 65 degrees celsius but i cannot control the FANS of that card. Always works at 100%.
Tried everything - with AMD Global WattMan settings /cannot control from there, always going back to default settings/, with Afterburner is the same.
Please help urgent! Thank you in advance!
Tried everything - with AMD Global WattMan settings /cannot control from there, always going back to default settings/, with Afterburner is the same.
Please help urgent! Thank you in advance!
If fan control doesn't work with Global Wattman or Afterburner while the miner is not running, then your problems lie elsewhere. Did you try latest drivers?
June 19, 2019, 07:33:27 AM
Hi guys, i have new card Radeon VII, mines just fine with Claymore v14.7 @ 95-96 Mh/s with 65 degrees celsius but i cannot control the FANS of that card. Always works at 100%.
Tried everything - with AMD Global WattMan settings /cannot control from there, always going back to default settings/, with Afterburner is the same.
Please help urgent! Thank you in advance!
Tried everything - with AMD Global WattMan settings /cannot control from there, always going back to default settings/, with Afterburner is the same.
Please help urgent! Thank you in advance!
June 19, 2019, 07:16:30 AM
Claymore's Dual Ethereum + Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak AMD+NVIDIA GPU Miner.
=========================
Latest version is v14.7 - Supercharged Edition:
-
-platform selects GPUs manufacturer. 1 - use AMD GPUs only. 2 - use NVIDIA GPUs only. 3 - use both AMD and NVIDIA GPUs. Default value is "3".
=========================
Latest version is v14.7 - Supercharged Edition:
-
-platform selects GPUs manufacturer. 1 - use AMD GPUs only. 2 - use NVIDIA GPUs only. 3 - use both AMD and NVIDIA GPUs. Default value is "3".
The option -platform doesn't work correctly when mixing two AMD platforms, vega20 and polaris10 in my case.
- If Radevon VII only, claymore sees them.
- If Radeon VII and RX570, claymore see only rx570 platform <- Here uis the bug. We cannot use claymore with two differents AMD platforms at the same time.
June 19, 2019, 07:11:22 AM
Claymore's Dual Ethereum + Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak AMD+NVIDIA GPU Miner.
=========================
Latest version is v14.7 - Supercharged Edition:
-
-platform selects GPUs manufacturer. 1 - use AMD GPUs only. 2 - use NVIDIA GPUs only. 3 - use both AMD and NVIDIA GPUs. Default value is "3".
=========================
Latest version is v14.7 - Supercharged Edition:
-
-platform selects GPUs manufacturer. 1 - use AMD GPUs only. 2 - use NVIDIA GPUs only. 3 - use both AMD and NVIDIA GPUs. Default value is "3".
The option -platform doesn't work correctly when mixing two AMD platforms, vega20 and polaris10 in my case.
- If Radevon VII only, claymore sees them.
- If Radeon VII and RX570, claymore see only rx570 platform <- Here uis the bug. We cannot use claymore with two differents AMD platforms at the same time.
June 19, 2019, 06:24:12 AM
hey guys can i mine monero with this rig?
i guess you mean to ask if you can mine monero with this miner
no you cannot
claymore does not support cryptonight algorithm
try xmr stak for it
Or...this https://bitcointalksearch.org/topic/claymores-cryptonote-amd-gpu-miner-v113-638915
June 19, 2019, 06:01:58 AM
hey guys can i mine monero with this rig?
i guess you mean to ask if you can mine monero with this miner
no you cannot
claymore does not support cryptonight algorithm
try xmr stak for it
June 19, 2019, 12:59:52 AM
Ive been running just fine until update. Im getting Cuda error 11 cannot allocate big buffer for dag. Cannot create Dag file.
Using 7 GTX 1070s
Virtual Memory 20GB
Please Help
Using 7 GTX 1070s
Virtual Memory 20GB
Please Help
20 GB is not enough, at least it should be the total memory capacity of all your cards 7 * 8 = 56 GB more will be even better, about 70 will be good.
The higher the better. Problem is a lot of people don't have that much room on their hard drives for their mining rig. Think mine is like 80gb total so my entire rig with virtual memory cranked up probably just gets enough - will probably need to get larger hard drive if I get any more than my current 6 gpu's to avoid crashes, which could occur sometimes once a week with virtual memory too low.
June 18, 2019, 05:36:19 PM
hey guys can i mine monero with this rig?
You're asking our permission? I personally have nothing against. Your rig - mine what you want. June 18, 2019, 05:03:05 PM
Ive been running just fine until update. Im getting Cuda error 11 cannot allocate big buffer for dag. Cannot create Dag file.
Using 7 GTX 1070s
Virtual Memory 20GB
Please Help
Using 7 GTX 1070s
Virtual Memory 20GB
Please Help
20 GB is not enough, at least it should be the total memory capacity of all your cards 7 * 8 = 56 GB more will be even better, about 70 will be good.
Would the -gser parameter also help his case in lieu of more virtual memory space?
June 18, 2019, 04:44:30 PM
Ive been running just fine until update. Im getting Cuda error 11 cannot allocate big buffer for dag. Cannot create Dag file.
Using 7 GTX 1070s
Virtual Memory 20GB
Please Help
Using 7 GTX 1070s
Virtual Memory 20GB
Please Help
20 GB is not enough, at least it should be the total memory capacity of all your cards 7 * 8 = 56 GB more will be even better, about 70 will be good.
June 18, 2019, 02:10:54 PM
hey guys can i mine monero with this rig?
June 18, 2019, 11:43:23 AM
can somebody help out with the driver feature ?
I ran "-driver uninstall" with admin rights.
Then if I run it with Admin Rights ( also tried with admin rights + -driver install in command line ) it doesn't seem to work.
I run it without admin rights and the driver switch command line and it says "driver is in use error".
claymore v14.7 with GTX 1080 Ti @ Win10 v1903 and GF drivers 418.21 or something like that.
I ran "-driver uninstall" with admin rights.
Then if I run it with Admin Rights ( also tried with admin rights + -driver install in command line ) it doesn't seem to work.
I run it without admin rights and the driver switch command line and it says "driver is in use error".
claymore v14.7 with GTX 1080 Ti @ Win10 v1903 and GF drivers 418.21 or something like that.
June 18, 2019, 09:26:13 AM
Quote
Power consumption is not working for 1050Ti
The NVIDIA driver no longer reports this information on these cards.
Works fine for me as of 14.7.
The NVIDIA driver no longer reports this information on these cards.
Works fine for me as of 14.7.
@forbiddenera
Can you show a screenshot?
And what VGA driver you are using?
June 18, 2019, 07:31:33 AM
v14.7:
- added "-showpower" option for stats about GPU power consumption, press "s" to see it. Both AMD and Nvidia cards are supported, except
- added "-showpower" option for stats about GPU power consumption, press "s" to see it. Both AMD and Nvidia cards are supported, except
Power consumption is not working for 1050Ti
Jump to: