Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1176.

mkimid

sr. member

Activity: 336

Merit: 250

Have A Nice Day

Quote from: Claymore on August 14, 2016, 03:03:15 PM

Quote from: mkimid on August 14, 2016, 02:50:24 PM

Quote from: Claymore on August 14, 2016, 02:37:55 PM

To all requests: I will check them a bit later, don't want to postpone new version again and again.
Within 24 hours I will release v6.0 with nvidia support, temp/fan management for amd 4xx cards and "-ttli" option to reduce overall mining intensity when GPU is overheated.

Please, support solo mining with Parity v1.3.0

No problem, as soon as someone can explain me how to make it work. Step by step: download link, how to start/configure, etc. Because I spent a lot of time and still don't have any ideas why it does not download blockchain though Mist wallet works on same system.

I think, JSONRPC command packet which request the work from the wallet(parity), is not compatible with Parity and it just return Invalid Message Error, I am not sure the how packet has configured from this miner (if there is any option to see the message, let me try with Parity manually), or Could you show me the message in solo mining mode such as 'http://127.0.0.1:8584';

Note: after fully synced with parity 1.3.0;
I have tried with ethminer.exe from CPP-Ethereum;
I feel the packet from this miner has recognized by parity successfully

Thank you for the good support always,

fredeq

legendary

Activity: 1537

Merit: 1005

Quote from: mkimid on August 14, 2016, 02:48:57 PM

AMD RX 470 (Sapphire nitro+, 8GB)
ETC/ETH 24.8MHz + SIA 460MH

Power at the wall please

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

Quote from: mkimid on August 14, 2016, 02:48:57 PM

AMD RX 470 (Sapphire nitro+, 8GB)
ETC/ETH 24.8MHz + SIA 460MH

If you don't mind can you give the amd driver version as well as clock speeds I couldn't get my 470 to run for over 12 hours with this miner. Genoil so far 4 days and counting. Waiting for claymore to release new version with support for 470

Xfx 470 stock is 22 mhs claymore and 21 mhs genoil with the occasional jump to 25 every 5 farm rechecks. Waiting to overclock once I know card runs steady.

Pt0x

sr. member

Activity: 266

Merit: 250

Quote from: Claymore on August 14, 2016, 02:37:55 PM

To all requests: I will check them a bit later, don't want to postpone new version again and again.
Within 24 hours I will release v6.0 with nvidia support, temp/fan management for amd 4xx cards and "-ttli" option to reduce overall mining intensity when GPU is overheated.

Which OS/Driver versions do you plan to support for the 6.0 Linux miner?

orionpaxx12

member

Activity: 101

Merit: 10

Quote from: clipto on August 14, 2016, 05:49:47 PM

press Windows Key + R, type “shell:startup” into the Run dialog
place a shortcut to the .bat file there

thanks i will give it a shot, seems pretty simple, thanks again

clipto

member

Activity: 311

Merit: 10

press Windows Key + R, type “shell:startup” into the Run dialog
place a shortcut to the .bat file there

orionpaxx12

member

Activity: 101

Merit: 10

I have my bios set to automatically start my rig when the power is lost so when the power is turned off the rig will automatically turn back on and boot is there any kind of command i can put into the bat.file to start mining as soon as my rig boots up, in case i am not around to manually start the miner myself, thanks in advance for any help Grin

clipto

member

Activity: 311

Merit: 10

Quote from: ocminer on August 03, 2016, 09:19:15 AM

Ah you want to merge-mine SIA at Suprnova.. Unfortunately the stratum protocol is not yet integrated into Claymore as far as I know, you can only mine ETC / DCR fully on Suprnova currently.

Will this be possible in the future by any chance?

xurious

sr. member

Activity: 413

Merit: 250

SiaMining.com [PPS] has added support for Claymore's Stratum on port 7777. See https://siamining.com/help for more info!

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: mkimid on August 14, 2016, 02:48:57 PM

AMD RX 470 (Sapphire nitro+, 8GB)
ETC/ETH 24.8MHz + SIA 460MH

Nice results this.

Can you share power consumption and any undervolt/overclock settings?

Gagana

member

Activity: 80

Merit: 10

Quote from: mkimid on August 14, 2016, 02:48:57 PM

AMD RX 470 (Sapphire nitro+, 8GB)
ETC/ETH 24.8MHz + SIA 460MH

Stock clock? How much is the power consumption ETH+SIA?

alexmobile

newbie

Activity: 12

Merit: 0

OK what version as I cannot get the current version of Claymore 5.3 to work for me at all

No matter what I put the PAGEFILE to I get the following error over and over

OpenCL error - cannot allocate big buffer for DAG.

any suggestion anyone???

Whats this Parity v1.3.0 and can you provide a link I am willing to try another miner...

thanks in advance....

Quote from: mkimid on August 14, 2016, 02:45:01 PM

Claymore's

Quote from: alexmobile on August 14, 2016, 12:30:24 PM

What the name of this dual miner?

Quote from: mkimid on August 14, 2016, 12:07:59 PM

i want to recommend the dual mining ETH or ETC with SIA
This miner is best for the dual mining
If it can support Solo Mining with Parity 1.3.0
Maybe

ETC (solo) + SIA (pool)

It will maximize the profit

Quote from: alexmobile on August 14, 2016, 11:40:27 AM

Question is one miner better than another when it comes to HAsh Rates?

I am trying to set this Claymore up but cant seem to get it squared (yes I have pagefile set to 25Gb min and 5Gb max)

Have used SGminer for X11 coins worked Fine
Cpu miner for X11 coins worked fine
Nicehash uses Genoil and it works fine but I want to keep my mined ETH not give away my power.

Any suggestions for ETH solo/pool mining or dual ETH mining with additional coin??

Thanks Huh

Quote from: mkimid on August 14, 2016, 11:16:09 AM

I feel as v5.3 version is not compatible with Parity v1.3.0 solo mining ?
It just return an error -32600 :

I have tested with ethminer (cpp version and genoil version), all working well.
I think, it is a problem with this miner
-or- maybe some kind of special option

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: mkimid on August 14, 2016, 02:50:24 PM

Quote from: Claymore on August 14, 2016, 02:37:55 PM

To all requests: I will check them a bit later, don't want to postpone new version again and again.
Within 24 hours I will release v6.0 with nvidia support, temp/fan management for amd 4xx cards and "-ttli" option to reduce overall mining intensity when GPU is overheated.

Please, support solo mining with Parity v1.3.0

No problem, as soon as someone can explain me how to make it work. Step by step: download link, how to start/configure, etc. Because I spent a lot of time and still don't have any ideas why it does not download blockchain though Mist wallet works on same system.

d57heinz

legendary

Activity: 1453

Merit: 1011

Bitcoin Talks Bullshit Walks

Quote from: Claymore on August 14, 2016, 02:37:55 PM

To all requests: I will check them a bit later, don't want to postpone new version again and again.
Within 24 hours I will release v6.0 with nvidia support, temp/fan management for amd 4xx cards and "-ttli" option to reduce overall mining intensity when GPU is overheated.

Thanks for the continued hard work you put into this miner. Looking forward to next release for my Rx 470. Thanks again

Best regards
d57heinz

mkimid

sr. member

Activity: 336

Merit: 250

Have A Nice Day

Quote from: Claymore on August 14, 2016, 02:37:55 PM

To all requests: I will check them a bit later, don't want to postpone new version again and again.
Within 24 hours I will release v6.0 with nvidia support, temp/fan management for amd 4xx cards and "-ttli" option to reduce overall mining intensity when GPU is overheated.

Please, support solo mining with Parity v1.3.0

mkimid

sr. member

Activity: 336

Merit: 250

Have A Nice Day

AMD RX 470 (Sapphire nitro+, 8GB)
ETC/ETH 24.8MHz + SIA 460MH

mkimid

sr. member

Activity: 336

Merit: 250

Have A Nice Day

Claymore's

Quote from: alexmobile on August 14, 2016, 12:30:24 PM

What the name of this dual miner?

Quote from: mkimid on August 14, 2016, 12:07:59 PM

i want to recommend the dual mining ETH or ETC with SIA
This miner is best for the dual mining
If it can support Solo Mining with Parity 1.3.0
Maybe

ETC (solo) + SIA (pool)

It will maximize the profit

Quote from: alexmobile on August 14, 2016, 11:40:27 AM

Question is one miner better than another when it comes to HAsh Rates?

I am trying to set this Claymore up but cant seem to get it squared (yes I have pagefile set to 25Gb min and 5Gb max)

Have used SGminer for X11 coins worked Fine
Cpu miner for X11 coins worked fine
Nicehash uses Genoil and it works fine but I want to keep my mined ETH not give away my power.

Any suggestions for ETH solo/pool mining or dual ETH mining with additional coin??

Thanks Huh

Quote from: mkimid on August 14, 2016, 11:16:09 AM

I feel as v5.3 version is not compatible with Parity v1.3.0 solo mining ?
It just return an error -32600 :

I have tested with ethminer (cpp version and genoil version), all working well.
I think, it is a problem with this miner
-or- maybe some kind of special option

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

To all requests: I will check them a bit later, don't want to postpone new version again and again.
Within 24 hours I will release v6.0 with nvidia support, temp/fan management for amd 4xx cards and "-ttli" option to reduce overall mining intensity when GPU is overheated.

z0n0

legendary

Activity: 1274

Merit: 1006

Quote from: RobertD on August 14, 2016, 01:32:05 PM

Quote from: z0n0 on August 14, 2016, 01:07:41 PM

Quote from: RobertD on August 14, 2016, 12:44:43 PM

290/290x if you have free electricity ( expect 250w-350w at the wall while dual mining )
rx480 if you can get them cheap

------------------------------------------------------------------------------------------------
280x ( 1175mhz core / 1700mhz mem ) hashes around 17mhs ETH + 500mhs SIA

290x ( 1125MHZ core / 1500MHz mem ) hashes around 31mhs ETH + 620mhs SIA

390 are similar to 290x, not worth the extra price

I don't get this dual mining, pls explain me this:
I can mine simontaniously ETH and SIA at same time? so for 280x you say I can get 17mh/ETH and 500mh/sia? What if I want to mine just ETH, will I gain some from non mining sia but just ETH (so instead 17 + 500 I get let say 20mh just on ETH)?

BTW - whats cheap for 480? is it 275EUR good price for it?

Mining SIA is less profitable than mining ETH, but Claymore figured out a way to compromise mining both at the same time.

You reduce your hashrate from 32MHs to 31MHs ETH, but gain 620MHs SIA. 1MHs reduction in ETH gives you 25% extra ETH once you sell the SIA.....so 31MHs+8MHs=39MHs instead of 32MHs. ( assuming free electrivity and no heat problems )

You can calculate the profit on http://whattomine.com/merged_coins/2-eth-sc

Thank you sir!

RobertD

newbie

Activity: 42

Merit: 0

Quote from: ps_jb on August 14, 2016, 01:20:42 PM

Quote from: z0n0 on August 14, 2016, 01:07:41 PM

BTW - whats cheap for 480? is it 275EUR good price for it?

No idea on European price - but in US it should ~$270 for custom Nitro with 8Gb

Welcome to the EU. Check out the prices on ebay.de......300-400euro for an RX480...insane.
I can't find RX480 localy for less than 310euro ( 360 USD ).

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1176. (Read 6590565 times)