Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1177.

RobertD

newbie

Activity: 42

Merit: 0

Quote from: z0n0 on August 14, 2016, 12:07:41 PM

Quote from: RobertD on August 14, 2016, 11:44:43 AM

290/290x if you have free electricity ( expect 250w-350w at the wall while dual mining )
rx480 if you can get them cheap

------------------------------------------------------------------------------------------------
280x ( 1175mhz core / 1700mhz mem ) hashes around 17mhs ETH + 500mhs SIA

290x ( 1125MHZ core / 1500MHz mem ) hashes around 31mhs ETH + 620mhs SIA

390 are similar to 290x, not worth the extra price

I don't get this dual mining, pls explain me this:
I can mine simontaniously ETH and SIA at same time? so for 280x you say I can get 17mh/ETH and 500mh/sia? What if I want to mine just ETH, will I gain some from non mining sia but just ETH (so instead 17 + 500 I get let say 20mh just on ETH)?

BTW - whats cheap for 480? is it 275EUR good price for it?

Mining SIA is less profitable than mining ETH, but Claymore figured out a way to compromise mining both at the same time.

You reduce your hashrate from 32MHs to 31MHs ETH, but gain 620MHs SIA. 1MHs reduction in ETH gives you 25% extra ETH once you sell the SIA.....so 31MHs+8MHs=39MHs instead of 32MHs. ( assuming free electrivity and no heat problems )

You can calculate the profit on http://whattomine.com/merged_coins/2-eth-sc

ps_jb

hero member

Activity: 742

Merit: 500

Quote from: z0n0 on August 14, 2016, 12:07:41 PM

BTW - whats cheap for 480? is it 275EUR good price for it?

No idea on European price - but in US it should ~$270 for custom Nitro with 8Gb

ps_jb

hero member

Activity: 742

Merit: 500

Quote from: RobertD on August 14, 2016, 11:54:18 AM

Why a R9 390 when it's similair price to RX 480??

1) Easy software-based overclock and control of temp, frequency etc
2) Stable double mining 30.2MHs (ETC/ETH) + 560MHs (SIA/DCR)
3) Easy to sell for 75% of initial price

z0n0

legendary

Activity: 1274

Merit: 1006

Quote from: RobertD on August 14, 2016, 11:44:43 AM

290/290x if you have free electricity ( expect 250w-350w at the wall while dual mining )
rx480 if you can get them cheap

------------------------------------------------------------------------------------------------
280x ( 1175mhz core / 1700mhz mem ) hashes around 17mhs ETH + 500mhs SIA

290x ( 1125MHZ core / 1500MHz mem ) hashes around 31mhs ETH + 620mhs SIA

390 are similar to 290x, not worth the extra price

I don't get this dual mining, pls explain me this:
I can mine simontaniously ETH and SIA at same time? so for 280x you say I can get 17mh/ETH and 500mh/sia? What if I want to mine just ETH, will I gain some from non mining sia but just ETH (so instead 17 + 500 I get let say 20mh just on ETH)?

BTW - whats cheap for 480? is it 275EUR good price for it?

RobertD

newbie

Activity: 42

Merit: 0

Quote from: ps_jb on August 14, 2016, 11:48:04 AM

Quote from: z0n0 on August 14, 2016, 11:33:28 AM

If a guy wants to jump in mining and has free electricity, what do you guys recommend to strat with?
For start just 2 or 3 GPU.
Is it better to pay more and buy new RX 470/480 or used maybe 290 or 280x?
Here in my country used 290 can be found at 190EUR, used 280x at 140EUR, while new RX or even 390 is about 290EUR.
Looking forward hearing from you guys, cheers!

I would recommend R9 390. Price is significantly dropped but you still can sell them reasonably good on ebay afterwards

Why a R9 390 when it's similair price to RX 480??

ps_jb

hero member

Activity: 742

Merit: 500

Quote from: z0n0 on August 14, 2016, 11:33:28 AM

If a guy wants to jump in mining and has free electricity, what do you guys recommend to strat with?
For start just 2 or 3 GPU.
Is it better to pay more and buy new RX 470/480 or used maybe 290 or 280x?
Here in my country used 290 can be found at 190EUR, used 280x at 140EUR, while new RX or even 390 is about 290EUR.
Looking forward hearing from you guys, cheers!

I would recommend R9 390. Price is significantly dropped but you still can sell them reasonably good on ebay afterwards

RobertD

newbie

Activity: 42

Merit: 0

290/290x if you have free electricity ( expect 250w-350w at the wall while dual mining )
rx480 if you can get them cheap

------------------------------------------------------------------------------------------------
280x ( 1175mhz core / 1700mhz mem ) hashes around 17mhs ETH + 500mhs SIA

290x ( 1125MHZ core / 1500MHz mem ) hashes around 31mhs ETH + 620mhs SIA

390 are similar to 290x, not worth the extra price

z0n0

legendary

Activity: 1274

Merit: 1006

If a guy wants to jump in mining and has free electricity, what do you guys recommend to strat with?
For start just 2 or 3 GPU.
Is it better to pay more and buy new RX 470/480 or used maybe 290 or 280x?
Here in my country used 290 can be found at 190EUR, used 280x at 140EUR, while new RX or even 390 is about 290EUR.
Looking forward hearing from you guys, cheers!

alexmobile

newbie

Activity: 12

Merit: 0

What the name of this dual miner?

Quote from: mkimid on August 14, 2016, 11:07:59 AM

i want to recommend the dual mining ETH or ETC with SIA
This miner is best for the dual mining
If it can support Solo Mining with Parity 1.3.0
Maybe

ETC (solo) + SIA (pool)

It will maximize the profit

Quote from: alexmobile on August 14, 2016, 10:40:27 AM

Question is one miner better than another when it comes to HAsh Rates?

I am trying to set this Claymore up but cant seem to get it squared (yes I have pagefile set to 25Gb min and 5Gb max)

Have used SGminer for X11 coins worked Fine
Cpu miner for X11 coins worked fine
Nicehash uses Genoil and it works fine but I want to keep my mined ETH not give away my power.

Any suggestions for ETH solo/pool mining or dual ETH mining with additional coin??

Thanks Huh

Quote from: mkimid on August 14, 2016, 10:16:09 AM

I feel as v5.3 version is not compatible with Parity v1.3.0 solo mining ?
It just return an error -32600 :

I have tested with ethminer (cpp version and genoil version), all working well.
I think, it is a problem with this miner
-or- maybe some kind of special option

alexmobile

newbie

Activity: 12

Merit: 0

I have tried 16, 25, 50gb Pagefiles also let windows set pagefile, nothing works may need to look for alternative Miner when I get some time to research which would give the best HashRate if any over another.

any suggestions??? Huh

Quote from: pwpwpw on August 14, 2016, 09:46:59 AM

Quote from: alexmobile on August 14, 2016, 08:37:28 AM

Ok so I did just that allowed windows to set what it wants as a pagefile and still have the same issues

I also have win 7 64
with 4x Windforce Radeon R9 270X 2GB
Drivers 16.7.3.

AAARGGHH!

set fixed pagefile, I have minimum 18GB, maximum 36GB.

mkimid

sr. member

Activity: 336

Merit: 250

Have A Nice Day

i want to recommend the dual mining ETH or ETC with SIA
This miner is best for the dual mining
If it can support Solo Mining with Parity 1.3.0
Maybe

ETC (solo) + SIA (pool)

It will maximize the profit

Quote from: alexmobile on August 14, 2016, 10:40:27 AM

Question is one miner better than another when it comes to HAsh Rates?

I am trying to set this Claymore up but cant seem to get it squared (yes I have pagefile set to 25Gb min and 5Gb max)

Have used SGminer for X11 coins worked Fine
Cpu miner for X11 coins worked fine
Nicehash uses Genoil and it works fine but I want to keep my mined ETH not give away my power.

Any suggestions for ETH solo/pool mining or dual ETH mining with additional coin??

Thanks Huh

Quote from: mkimid on August 14, 2016, 10:16:09 AM

I feel as v5.3 version is not compatible with Parity v1.3.0 solo mining ?
It just return an error -32600 :

I have tested with ethminer (cpp version and genoil version), all working well.
I think, it is a problem with this miner
-or- maybe some kind of special option

alexmobile

newbie

Activity: 12

Merit: 0

Question is one miner better than another when it comes to HAsh Rates?

I am trying to set this Claymore up but cant seem to get it squared (yes I have pagefile set to 25Gb min and 5Gb max)

Have used SGminer for X11 coins worked Fine
Cpu miner for X11 coins worked fine
Nicehash uses Genoil and it works fine but I want to keep my mined ETH not give away my power.

Any suggestions for ETH solo/pool mining or dual ETH mining with additional coin??

Thanks Huh

Quote from: mkimid on August 14, 2016, 10:16:09 AM

I feel as v5.3 version is not compatible with Parity v1.3.0 solo mining ?
It just return an error -32600 :

I have tested with ethminer (cpp version and genoil version), all working well.
I think, it is a problem with this miner
-or- maybe some kind of special option

mkimid

sr. member

Activity: 336

Merit: 250

Have A Nice Day

I feel as v5.3 version is not compatible with Parity v1.3.0 solo mining ?
It just return an error -32600 :

I have tested with ethminer (cpp version and genoil version), all working well.
I think, it is a problem with this miner
-or- maybe some kind of special option

pwpwpw

hero member

Activity: 908

Merit: 503

I had a weird bug where a 80C card was read as 135C and I have -tstop 95, my question is, if any card reach tstop, they will never start again ? Is there a way to start them after a fixed time, or temp? I had it running for a few minutes, went down to 40C but didn't start again.

Code:

17:35:26:901 15f8 parse packet: 242
17:35:26:901 15f8 eth: job changed
17:35:26:901 15f8 new buf size: 0
17:35:26:901 15f8 ETH: 08/14/16-17:35:26 - New job from etc-eu1.nanopool.org:19999
17:35:26:901 15f8 target: 0x00000000dbe6fece (diff: 5000MH), epoch #68
17:35:26:901 15f8 ETH - Total Speed: 27.476 Mh/s, Total Shares: 1163, Rejected: 1, Time: 60:51
17:35:26:902 15f8 ETH: GPU0 27.476 Mh/s
17:35:26:902 15f8 SC - Total Speed: 480.836 Mh/s, Total Shares: 2123, Rejected: 0
17:35:26:902 15f8 SC: GPU0 480.836 Mh/s
17:35:29:609 bb8 GPU 0 temp = 80, old fan speed = 100, new fan speed = 100

17:35:29:979 15f8 ETH: checking pool connection...
17:35:29:979 15f8 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

17:35:30:035 15f8 got 243 bytes
17:35:30:035 15f8 buf: {"jsonrpc":"2.0","id":0,"result":["0xbba0011a7a3bac48f18ef8a0441566fedb92fe630298ad10f097fa932983fe1b","0xdeb13fd7c8eb5b6e43fe49e77f32c5e38fd7679be198414e839c7e1b83f17dc5","0x00000000dbe6fecebdedd5beb573440e5a884d1b2fbf06fcce912adcb8d8422e"]}

17:35:30:035 15f8 parse packet: 242
17:35:30:035 15f8 eth: job is the same
17:35:30:035 15f8 new buf size: 0
17:35:32:717 bb8 GPU #0 reached STOP temperature (135 >= 95), stop mining on this GPU.
17:35:32:718 bb8 GPU 0 temp = 135, old fan speed = 100, new fan speed = 100

17:35:35:724 bb8 GPU 0 temp = 73, old fan speed = 100, new fan speed = 100

17:35:37:808 15f8 send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x1a1b185", "0x00000000000000000000000000000000000000000000000000000000b5648154"]}

17:35:38:728 bb8 GPU 0 temp = 68, old fan speed = 100, new fan speed = 100

17:35:39:993 15f8 ETH: checking pool connection...
17:35:39:993 15f8 send: {"worker": "", "jsonrpc": "2.0", "params": [], "id": 3, "method": "eth_getWork"}

17:35:40:052 15f8 got 243 bytes
17:35:40:052 15f8 buf: {"jsonrpc":"2.0","id":0,"result":["0xbba0011a7a3bac48f18ef8a0441566fedb92fe630298ad10f097fa932983fe1b","0xdeb13fd7c8eb5b6e43fe49e77f32c5e38fd7679be198414e839c7e1b83f17dc5","0x00000000dbe6fecebdedd5beb573440e5a884d1b2fbf06fcce912adcb8d8422e"]}

17:35:40:052 15f8 parse packet: 242
17:35:40:052 15f8 eth: job is the same
17:35:40:052 15f8 new buf size: 0
17:35:41:731 bb8 GPU 0 temp = 66, old fan speed = 100, new fan speed = 100

17:35:41:734 bb8 GPU0 t=66C fan=100%
17:35:41:735 bb8 em hbt: 0, dm hbt: 0, fm hbt: 47,
17:35:41:735 bb8 watchdog - thread 0, hb time 94
17:35:41:735 bb8 watchdog - thread 1, hb time 63
17:35:44:261 15f8 got 243 bytes
17:35:44:261 15f8 buf: {"jsonrpc":"2.0","id":0,"result":["0x8939de0b3d3b7262ebca2980616e96f20a78ad2deba7dff212671b6fe44cbf4b","0xdeb13fd7c8eb5b6e43fe49e77f32c5e38fd7679be198414e839c7e1b83f17dc5","0x00000000dbe6fecebdedd5beb573440e5a884d1b2fbf06fcce912adcb8d8422e"]}

17:35:44:261 15f8 parse packet: 242
17:35:44:262 15f8 eth: job changed
17:35:44:262 15f8 new buf size: 0
17:35:44:262 15f8 ETH: 08/14/16-17:35:44 - New job from etc-eu1.nanopool.org:19999
17:35:44:262 15f8 target: 0x00000000dbe6fece (diff: 5000MH), epoch #68
17:35:44:262 15f8 ETH - Total Speed: 0.000 Mh/s, Total Shares: 1163, Rejected: 1,

pwpwpw

hero member

Activity: 908

Merit: 503

Quote from: alexmobile on August 14, 2016, 08:37:28 AM

Ok so I did just that allowed windows to set what it wants as a pagefile and still have the same issues

I also have win 7 64
with 4x Windforce Radeon R9 270X 2GB
Drivers 16.7.3.

AAARGGHH!

set fixed pagefile, I have minimum 18GB, maximum 36GB.

TimLev

newbie

Activity: 13

Merit: 0

Hello, Claymore!
I am not an Englishman, so I apologize for the language in advance.

Regularly one card in rig starts to continuously get incorrect shares. It can work 3-5-10 days 24/7 with no problem, and suddenly all the shares are incorrect: "GPU #2 got incorrect share. If you see this warning often, make sure you did not overclock it too much!"
Overclocked or not does not matter, the same result. After rebooting begins to work well next period.

Would be very good if the miner will be have watchdog option: if 9 of 10 last shares from one card are incorrect, then execute reboot.bat.

(Rig configuration: 2x Sapphire Nitro R9 390, 2x Gigabyte R9 290 3X, 1x Sapphire R9 290 3X, MB GIGABYTE GA-X38-DS4, Win 10, Crimson 15.12, Claymore's miner 5.1 beta, Eth only) (GPU #2 - Gigabyte R9 290 3X 1040/1250)

alexmobile

newbie

Activity: 12

Merit: 0

Ok so I did just that allowed windows to set what it wants as a pagefile and still have the same issues

I also have win 7 64
with 4x Windforce Radeon R9 270X 2GB
Drivers 16.7.3.

AAARGGHH!

Quote from: vapourminer on August 14, 2016, 08:21:55 AM

win 7 pro x64 16 gigs ram here. windows sets whatever page file it wants. plus ubuntu 15.10 desktop, x64 4 gigs ram, and it does whatever it wants too. i have no idea what its swap is set at.

and it does work absolutely no problems here on both systems. just figured id toss that out here.

Quote from: caligvla on August 14, 2016, 07:55:03 AM

I've been mining a month and never had this issue before... Im running Win 10, 16 GB virtual memory, 4gb ram, claymore 5.2, 6x RX 480 8 GB, Drivers 16.7.2.
It's really bizarre!

I think this has impacted a lot of people. I'm using Alpereum for mining and I can see that about two hour sago the hashrate halved, same time when my issues began (12:57 CET)

Quote from: alexmobile on August 14, 2016, 07:51:21 AM

I went and searched thru previous posts from users who are getting similar errors..

What I find is consistent is you must have 16mb Pagefile or more and at least 2mb on the video cards (I have this correct)
I read several people tried running Catalyst 15.12, 14.9 and newer ver still end up with the same

Hello guys, I have a similar problem. I was mining fine but an hour ago I am now stuck in a Setting DAG Epoch loop between #68 and #69. What is going on? How do I fix this?
http://imgur.com/a/H2AkF

[/quote]
[/quote]

vapourminer

legendary

Activity: 4354

Merit: 3614

what is this "brake pedal" you speak of?

win 7 pro x64 16 gigs ram here. windows sets whatever page file it wants. plus ubuntu 15.10 desktop, x64 4 gigs ram, and it does whatever it wants too. i have no idea what its swap is set at.

and it does work absolutely no problems here on both systems. just figured id toss that out here.

Quote from: caligvla on August 14, 2016, 07:55:03 AM

I've been mining a month and never had this issue before... Im running Win 10, 16 GB virtual memory, 4gb ram, claymore 5.2, 6x RX 480 8 GB, Drivers 16.7.2.
It's really bizarre!

I think this has impacted a lot of people. I'm using Alpereum for mining and I can see that about two hour sago the hashrate halved, same time when my issues began (12:57 CET)

Quote from: alexmobile on August 14, 2016, 07:51:21 AM

I went and searched thru previous posts from users who are getting similar errors..

What I find is consistent is you must have 16mb Pagefile or more and at least 2mb on the video cards (I have this correct)
I read several people tried running Catalyst 15.12, 14.9 and newer ver still end up with the same

Hello guys, I have a similar problem. I was mining fine but an hour ago I am now stuck in a Setting DAG Epoch loop between #68 and #69. What is going on? How do I fix this?

[/quote]

[/quote]

caligvla

newbie

Activity: 2

Merit: 0

alexmobile

newbie

Activity: 12

Merit: 0

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1177. (Read 6590757 times)