Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1199.

ps_jb

hero member

Activity: 742

Merit: 500

Quote from: chup on July 26, 2016, 01:46:45 PM

Quote from: ps_jb on July 26, 2016, 12:38:03 PM

Can somebody paste here their Claymore command line for dual mining ETC (suprnova)+SIA?

EthDcrMiner64.exe -mode 0 -ethi 8 -dcri 50 -esm 3 -etha 0 -dbg -1 -mport 0 -r 1 -epool etc-eu.suprnova.cc:3333 -ewal User.worker -epsw password -dpool http://sia-eu1.nanopool.org:9980/miner/header?"address=your_address&worker=your_worker" -dcoin sc -allpools 1 -allcoins -1

Profit.

Gracias!

spyshagg

full member

Activity: 176

Merit: 100

depending on the card, you can achieve the same optimal ETH hashrate at both ~ 40 and 80/90 etc. Inbetween those values ETH performance falls a lot.

Anyway this is what happened with my 290x when dual mining decred a month ago. Don't know about SIA.

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: alevlaslo on July 26, 2016, 01:51:42 PM

Quote from: ps_jb on July 26, 2016, 12:38:03 PM

Can somebody paste here their Claymore command line for dual mining ETC (suprnova)+SIA?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool etc-eu.suprnova.cc:3333 -ewal alevlaslo.1 -epsw x -esm 3 -allpools 1 -allcoins 1 -dpool "http://sia-eu1.nanopool.org:9980/miner/header?address=e17d1a8498e571d4d778b9ad8f3335101748100e6987c4c4febd57a1d94f2f968ea1db22dc4d" -dcoin sia -dcri 80 -logfile 0 -tt 60

-dcri 80 ?

Is this the optimum dcri for SIA?

fredeq

legendary

Activity: 1537

Merit: 1005

Can you actually connect to suprnova ETC?
Offline for me for some hours now.

alevlaslo

hero member

Activity: 1988

Merit: 593

Quote from: ps_jb on July 26, 2016, 12:38:03 PM

Can somebody paste here their Claymore command line for dual mining ETC (suprnova)+SIA?

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool etc-eu.suprnova.cc:3333 -ewal alevlaslo.1 -epsw x -esm 3 -allpools 1 -allcoins 1 -dpool "http://sia-eu1.nanopool.org:9980/miner/header?address=e17d1a8498e571d4d778b9ad8f3335101748100e6987c4c4febd57a1d94f2f968ea1db22dc4d" -dcoin sia -dcri 80 -logfile 0 -tt 60

alevlaslo

hero member

Activity: 1988

Merit: 593

Claymore, add the recommended ETC pool in the next release please

chup

sr. member

Activity: 736

Merit: 262

Me, Myself & I

Quote from: ps_jb on July 26, 2016, 12:38:03 PM

Can somebody paste here their Claymore command line for dual mining ETC (suprnova)+SIA?

EthDcrMiner64.exe -mode 0 -ethi 8 -dcri 50 -esm 3 -etha 0 -dbg -1 -mport 0 -r 1 -epool etc-eu.suprnova.cc:3333 -ewal User.worker -epsw password -dpool http://sia-eu1.nanopool.org:9980/miner/header?"address=your_address&worker=your_worker" -dcoin sc -allpools 1 -allcoins -1

Profit.

zero1

newbie

Activity: 13

Merit: 0

Quote from: Bakery on July 26, 2016, 11:56:38 AM

Quote from: zero1 on July 26, 2016, 10:38:16 AM

Quote from: forbidden on July 24, 2016, 04:11:38 PM

http://ethc.epool.io

doesnt open after checking the browzer (chrome/mozila)

Quote from: restless on July 24, 2016, 04:17:08 AM

One of my cards from time to time get as hot as 80C
As i want to keep all cards under 80, i use -tstop 80
But ones the card reaches 80, its stopped from miner and never returned to mining.
is there a way to auto-restart it? or I should just use higher value for tstop?
Or simply restart the miner from time to time (say -r 60 )

i have 4 gpu 280x and the 2 of them goes to 80 as well with dual mining eth/sc (sometimes more) with fans 100 % ofc (-tt -100).i solve the prob with extra fan hit directy on cooler (3 to 6 degree less temp). imo the r -? will not help

Quote from: zero1 on July 24, 2016, 10:21:28 AM

Miner stopped suddenly (4gpu ubuntu 14.04) . My last lines on log file :

Quote

11:58:10:239   377fe700   parse packet: 242
11:58:10:239   377fe700   eth: job is the same
11:58:10:239   377fe700   new buf size: 0
11:58:11:781   5bbe0780   GPU0 t=75C fan=100%, GPU1 t=76C fan=100%, GPU2 t=70C fan=80%, GPU3 t=70C fan=80%
11:58:11:782   5bbe0780   em hbt: 0, dm hbt: 3733, fm hbt: 82,
11:58:11:782   5bbe0780   watchdog - thread 0, hb time 120
11:58:11:782   5bbe0780   watchdog - thread 1, hb time 268
11:58:11:782   5bbe0780   watchdog - thread 2, hb time 49
11:58:11:782   5bbe0780   watchdog - thread 3, hb time 198
11:58:11:782   5bbe0780   watchdog - thread 4, hb time 240
11:58:11:782   5bbe0780   watchdog - thread 5, hb time 87
11:58:11:782   5bbe0780   watchdog - thread 6, hb time 219
11:58:11:782   5bbe0780   watchdog - thread 7, hb time 74
\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\........

1) What is the issue here ? How can i fix it ?

2) How can i restart automatically miner after a failure ? Because the default -r 0 doesn't seem to work.

Help anyone ? Thanks in advance !

no1 else has that prob?? im using 5.1
ps: miner do that error after 12 to 24 hours of mining random if that helps. does any1 has a script to autostart miner after restart pc? i might try to rr pc every 10 hours.....

Try to put your GPU clocks a bit lower, maybe that helps from haning.
Google how to add program to startup and put your batch file to startup.
Somehow the -r 0 (which is default) also didnt help, miner was idle for 1 hour before it restarted itself.
You can put -r 1440 for miner to restart itself every 24h.(or another value)

the gpus are on default values ...no overclock no overvolt
i try with xterm -e /path/start.bash on startup application but dont do nothing after restart
i try ofc the -r flag for to many values(60.480.600), still miner crashes
ty 4 answer

ps_jb

hero member

Activity: 742

Merit: 500

Can somebody paste here their Claymore command line for dual mining ETC (suprnova)+SIA?

Indytim

newbie

Activity: 3

Merit: 0

Quote from: Claymore on April 11, 2016, 11:30:36 AM

Claymore's Dual Ethereum+Decred AMD GPU Miner.
=========================

Latest version v5.1:

UPDATE: Beta2 - fixed issue with sending blocks in ETH solo mining.

SAMPLE USAGE

ethpool, ethermine (and Siacoin solo):
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool http://localhost:9980/miner/header -dcoin sia

Can someone shed light on the siacoin solo mining arguments? Is the port always going to be 9980? What software do I need to have installed and configured, in additional to Claymore? I assume I need sia-ui? Are there any requirements for where it's installed, my environment setup, etc?

Spufa

newbie

Activity: 28

Merit: 0

My miner is running fine for some time but it just stops mining for some reason. I just close and run bat again and its fine.... anyone know what problem might be ?

spyshagg

full member

Activity: 176

Merit: 100

Quote from: hiranyakasipu on July 26, 2016, 12:16:56 PM

I've been able to stop the freezing with the -mode 1-0 command. It appears that this 290x2 is flying at half-mast and that that is the real problem. It's reporting gpu0 at 8.8 Mh and gpu1 at 17 Mh, which is about half of its capabilities. The others are OK.

Quote from: hiranyakasipu on July 25, 2016, 07:18:07 PM

Greetings,

I am trying to resolve a system-hanging-requiring-reboot issue, the ETH/SIA mining runs fine for a minute or so, then does the GPU hangs in OpenCL call thing. These are stock video cards with no overclocking, Claymore 5.1, Beta 2. Ubuntu 15.10. It runs fine with ethminer, and has 8Gb. I saw a previous answer to this type of problem to be add memory, but that doesn't seem to me to be the problem. The shown hash rate isn't the problem, I have adjusted the SIA intensity up and down. Thanks much in advance for any insight.

GPU #0 recognized as Radeon 280X/380X
GPU #1 recognized as Radeon 280X/380X
GPU #2 recognized as Radeon 390
GPU #3 recognized as Radeon 290X
GPU #4 recognized as Radeon 290X

ETH - Total Speed: 41.449 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:01
ETH: GPU0 5.401 Mh/s, GPU1 0.000 Mh/s, GPU2 13.438 Mh/s, GPU3 11.316 Mh/s, GPU4 11.294 Mh/s
SC - Total Speed: 2486.920 Mh/s, Total Shares: 4, Rejected: 0
SC: GPU0 324.062 Mh/s, GPU1 0.000 Mh/s, GPU2 806.296 Mh/s, GPU3 678.943 Mh/s, GPU4 677.619 Mh/s
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit

��ͻ
� Claymore's Dual ETH + DCR/SC AMD GPU Miner v5.1 Beta �
��ͼ

ETH: 1 pool is specified
Main Ethereum pool is us-east1.nanopool.org:9999
SC: 1 pool is specified
Main Siacoin pool is sia-us-east1.nanopool.org:9980

Mining Eth only that card should be doing 50mh/s stock

madmartyk

legendary

Activity: 2688

Merit: 1030

Yes I am a pirate, 300 years too late!

Did the trick!!

hiranyakasipu

newbie

Activity: 3

Merit: 0

I've been able to stop the freezing with the -mode 1-0 command. It appears that this 290x2 is flying at half-mast and that that is the real problem. It's reporting gpu0 at 8.8 Mh and gpu1 at 17 Mh, which is about half of its capabilities. The others are OK.

Quote from: hiranyakasipu on July 25, 2016, 07:18:07 PM

Greetings,

I am trying to resolve a system-hanging-requiring-reboot issue, the ETH/SIA mining runs fine for a minute or so, then does the GPU hangs in OpenCL call thing. These are stock video cards with no overclocking, Claymore 5.1, Beta 2. Ubuntu 15.10. It runs fine with ethminer, and has 8Gb. I saw a previous answer to this type of problem to be add memory, but that doesn't seem to me to be the problem. The shown hash rate isn't the problem, I have adjusted the SIA intensity up and down. Thanks much in advance for any insight.

GPU #0 recognized as Radeon 280X/380X
GPU #1 recognized as Radeon 280X/380X
GPU #2 recognized as Radeon 390
GPU #3 recognized as Radeon 290X
GPU #4 recognized as Radeon 290X

ETH - Total Speed: 41.449 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:01
ETH: GPU0 5.401 Mh/s, GPU1 0.000 Mh/s, GPU2 13.438 Mh/s, GPU3 11.316 Mh/s, GPU4 11.294 Mh/s
SC - Total Speed: 2486.920 Mh/s, Total Shares: 4, Rejected: 0
SC: GPU0 324.062 Mh/s, GPU1 0.000 Mh/s, GPU2 806.296 Mh/s, GPU3 678.943 Mh/s, GPU4 677.619 Mh/s
WATCHDOG: GPU 1 hangs in OpenCL call, exit
WATCHDOG: GPU 1 hangs in OpenCL call, exit

��ͻ
� Claymore's Dual ETH + DCR/SC AMD GPU Miner v5.1 Beta �
��ͼ

ETH: 1 pool is specified
Main Ethereum pool is us-east1.nanopool.org:9999
SC: 1 pool is specified
Main Siacoin pool is sia-us-east1.nanopool.org:9980

spyshagg

full member

Activity: 176

Merit: 100

Quote from: madmartyk on July 26, 2016, 11:57:19 AM

Quote from: spyshagg on July 26, 2016, 11:48:19 AM

Quote from: madmartyk on July 26, 2016, 10:58:19 AM

Quote from: markus124 on July 26, 2016, 09:21:05 AM

I'm using claymore in this póol and they are paying https://ethc.coin-miners.info
u can mine directly too poloniex.

Giving it a try!!

me too! working great so far!

What has to be changes from the EMP example to start dual mining again?

Has to be one of these... -ethi 16 -mode 1 -esm 0

setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool stratum.coin-miners.info:8008 -ewal 0xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -epsw x -dpool "http://siamining.com:9980/miner/header?address=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx=worker1" -dcoin sia -dcri 42 -tt 1 -tstop -93 -ethi 8 -gser 2 -ttdcr 89

You only set "mode" option if you dont want to dual mine.

madmartyk

legendary

Activity: 2688

Merit: 1030

Yes I am a pirate, 300 years too late!

Quote from: spyshagg on July 26, 2016, 11:48:19 AM

Quote from: madmartyk on July 26, 2016, 10:58:19 AM

Quote from: markus124 on July 26, 2016, 09:21:05 AM

I'm using claymore in this póol and they are paying https://ethc.coin-miners.info
u can mine directly too poloniex.

Giving it a try!!

me too! working great so far!

What has to be changes from the EMP example to start dual mining again?

Has to be one of these... -ethi 16 -mode 1 -esm 0

Bakery

newbie

Activity: 55

Merit: 0

Quote from: zero1 on July 26, 2016, 10:38:16 AM

Quote from: forbidden on July 24, 2016, 04:11:38 PM

http://ethc.epool.io

doesnt open after checking the browzer (chrome/mozila)

Quote from: restless on July 24, 2016, 04:17:08 AM

One of my cards from time to time get as hot as 80C
As i want to keep all cards under 80, i use -tstop 80
But ones the card reaches 80, its stopped from miner and never returned to mining.
is there a way to auto-restart it? or I should just use higher value for tstop?
Or simply restart the miner from time to time (say -r 60 )

i have 4 gpu 280x and the 2 of them goes to 80 as well with dual mining eth/sc (sometimes more) with fans 100 % ofc (-tt -100).i solve the prob with extra fan hit directy on cooler (3 to 6 degree less temp). imo the r -? will not help

Quote from: zero1 on July 24, 2016, 10:21:28 AM

Miner stopped suddenly (4gpu ubuntu 14.04) . My last lines on log file :

Quote

11:58:10:239   377fe700   parse packet: 242
11:58:10:239   377fe700   eth: job is the same
11:58:10:239   377fe700   new buf size: 0
11:58:11:781   5bbe0780   GPU0 t=75C fan=100%, GPU1 t=76C fan=100%, GPU2 t=70C fan=80%, GPU3 t=70C fan=80%
11:58:11:782   5bbe0780   em hbt: 0, dm hbt: 3733, fm hbt: 82,
11:58:11:782   5bbe0780   watchdog - thread 0, hb time 120
11:58:11:782   5bbe0780   watchdog - thread 1, hb time 268
11:58:11:782   5bbe0780   watchdog - thread 2, hb time 49
11:58:11:782   5bbe0780   watchdog - thread 3, hb time 198
11:58:11:782   5bbe0780   watchdog - thread 4, hb time 240
11:58:11:782   5bbe0780   watchdog - thread 5, hb time 87
11:58:11:782   5bbe0780   watchdog - thread 6, hb time 219
11:58:11:782   5bbe0780   watchdog - thread 7, hb time 74
\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\00\........

1) What is the issue here ? How can i fix it ?

2) How can i restart automatically miner after a failure ? Because the default -r 0 doesn't seem to work.

Help anyone ? Thanks in advance !

no1 else has that prob?? im using 5.1
ps: miner do that error after 12 to 24 hours of mining random if that helps. does any1 has a script to autostart miner after restart pc? i might try to rr pc every 10 hours.....

Try to put your GPU clocks a bit lower, maybe that helps from haning.
Google how to add program to startup and put your batch file to startup.
Somehow the -r 0 (which is default) also didnt help, miner was idle for 1 hour before it restarted itself.
You can put -r 1440 for miner to restart itself every 24h.(or another value)

spyshagg

full member

Activity: 176

Merit: 100

Quote from: madmartyk on July 26, 2016, 10:58:19 AM

Quote from: markus124 on July 26, 2016, 09:21:05 AM

I'm using claymore in this póol and they are paying https://ethc.coin-miners.info
u can mine directly too poloniex.

Giving it a try!!

me too! working great so far!

Bakery

newbie

Activity: 55

Merit: 0

Quote from: markus124 on July 26, 2016, 11:27:46 AM

anyone can tell me if siacoin is more profitble than decred in dual mining mode? thanks

www.whattomine.com

but the answer is yes.

ps_jb

hero member

Activity: 742

Merit: 500

Quote from: markus124 on July 26, 2016, 11:27:46 AM

anyone can tell me if siacoin is more profitble than decred in dual mining mode? thanks

Yes SC is more profitable than DCR

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1199. (Read 6590565 times)