Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1353.

restless

legendary

Activity: 1151

Merit: 1001

Quote from: aimsml on April 27, 2016, 12:32:03 PM

help if you can.
stock video card settings
EthDcrMiner64.exe -mode 0,0,0 -etha 0,0,0 -ethi 8,4,4 -epool eu1.ethermine.org:4444 -esm 1 -ewal 0xxxxxxxxx -epsw x -dpool stratum + tcp: // yiimp.ccminer.org:4252 -dwal xxxxxxxxxx -dpsw 1970 -dcri 33,45,45 -cclock 1100,1100,1100 -mclock 1500,1500,1500 -tt 78,78,78 -dbg -1
I broke all head ....
Speed has hashrate min

Try
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -esm 1 -ewal 0xxxxxxxxx -epsw x -cclock 1100 -mclock 1500 -tt 78 -dbg -1

Decred mining DEcreases eth speed
Confirm your speed with pure eth mining, then add decred dual-mining and using
keyboard + - find the sweet spot )if any

Xdragon

hero member

Activity: 543

Merit: 500

Quote from: zorvalth on April 27, 2016, 12:13:46 PM

Quote from: aimsml on April 27, 2016, 12:05:17 PM

mr Claymore you clever conman Huh

test setup 3xr9 380h operated under standards miner. Had 62 Mhs stable. After switching on your miner received 50 Mhs.
Explain what is the problem?
TKS

Probably lack of your knowledge, most of us boosted 5-10%

Here are my 4x380 properly set

Very immpressive. At what clocks?

ZXSpectrum

newbie

Activity: 29

Merit: 0

Hi,

Running 15.12 Drivers Win 64bit. Latest 3.3 miner.

1 x SAPPHIRE HD 7950 3GB OC with Boost Vapor-X Edition

Only getting 18.1MH/s what am I doing wrong

If I put it in mode one the hash rate goes DOWN to 17.9MH/s

EthDcrMiner64.exe -ethi 16 -epool eu1.nanopool.org:9999 -ewal -epsw x -dcri 21 -dpool stratum+tcp://stratum.decredpool.org:3333 -dwal -dpsw x

Strange thing is overclocking doesn't make any difference, or can MSI afterburner not overclock these cards? if so how do I do that?

Even if I move the CPU Clock to 1100 the hash rate doesn't go up (Cant overclock from the miner program, no matter what values I put it crashes)

aimsml

member

Activity: 66

Merit: 10

Quote from: zorvalth on April 27, 2016, 12:13:46 PM

Quote from: aimsml on April 27, 2016, 12:05:17 PM

mr Claymore you clever conman Huh

test setup 3xr9 380h operated under standards miner. Had 62 Mhs stable. After switching on your miner received 50 Mhs.
Explain what is the problem?
TKS

Probably lack of your knowledge, most of us boosted 5-10%

Here are my 4x380 properly set

help if you can.
stock video card settings
EthDcrMiner64.exe -mode 0,0,0 -etha 0,0,0 -ethi 8,4,4 -epool eu1.ethermine.org:4444 -esm 1 -ewal 0xxxxxxxxx -epsw x -dpool stratum + tcp: // yiimp.ccminer.org:4252 -dwal xxxxxxxxxx -dpsw 1970 -dcri 33,45,45 -cclock 1100,1100,1100 -mclock 1500,1500,1500 -tt 78,78,78 -dbg -1
I broke all head ....
Speed has hashrate min

zorvalth

full member

Activity: 223

Merit: 100

Quote from: aimsml on April 27, 2016, 12:05:17 PM

mr Claymore you clever conman Huh

test setup 3xr9 380h operated under standards miner. Had 62 Mhs stable. After switching on your miner received 50 Mhs.
Explain what is the problem?
TKS

Probably lack of your knowledge, most of us boosted 5-10%

Here are my 4x380 properly set

aimsml

member

Activity: 66

Merit: 10

mr Claymore you clever conman Huh

test setup 3xr9 380h operated under standards miner. Had 62 Mhs stable. After switching on your miner received 50 Mhs.
Explain what is the problem?
TKS

elzium

member

Activity: 96

Merit: 10

Quote from: Marvell1 on April 27, 2016, 11:17:28 AM

Quote from: elzium on April 27, 2016, 05:59:46 AM

I've also had problems with dual mining while eth only was stable. One rig died, other restarted. Both were weak psu and nothing more. Gave them more juice and now works like a charm on 3.2

There is easy way to test it, start dual mode with -dcri 1 and if no problems, start to increase it while mining by pressing +. Maximum consumption is reached somewhere around -dcri 80.
Wattmeter showed me 200W extra power on 4x280x rig..

Same thing with dag creation, draws more power.

Anyone sees sent hashrate on dwarf?

I though i had a problem with the 1k watt XFX psu as well i had but i tried it with just 2 390 cards rather than the four i nonmally run and my miner still crashes in dual mode, works fine in solo eth mode.

To make sure its not a power issue, run it at -dcri 1. Risers are powered?

Mrga666

newbie

Activity: 10

Merit: 0

I still have the same issue of this miner recognising my 2 390 graphics cards as 290 ones.
Reinstalling drivers did nothing to help...
Does it even matter?

revelacaogr

legendary

Activity: 1316

Merit: 1021

2009 Alea iacta est

Quote from: divan0w on April 27, 2016, 08:23:42 AM

Hi, I try for first time this Dual miner, so far I mined only ETH with my 2x290(I have 4 machines with 2x290). Installed 15.12 driver and made corrections to start.bat and now looks like this:

these commnands u need only once (( new OS install )) (( go to control panel/system/advanced system settings/advanced/environment variables/user variables )) to check

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.nanopool.org:8888 -ewal 0x3d5f3243ed50c3614efbe6853bab45d1a55a5892/probt -epsw x -dpool dcr.suprnova.cc:9112 -dwal DseAYH56epfWxYmdo8XD9voCbrej9vwPpEi -dpsw x

I think all was going fine but I receive this:

16:22:43:011   13bc   checkread timeout
16:22:43:011   13bc   ETH: Job timeout, disconnect, retry in 20 sec...
16:22:44:281   13c8   checkread timeout
16:22:44:284   13c8    DCR: Job timeout, disconnect, retry in 20 sec...

[/quote]
try this :
EthDcrMiner64.exe -epool eu1.nanopool.org:8888 -ewal 0x3d5f3243ed50c3614efbe6853bab45d1a55a5892 -epsw x -ethi 10 -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal user.worker -dpsw pass -dcri 50 -mode 0

baykan

full member

Activity: 133

Merit: 100

Quote from: baykan on April 27, 2016, 06:31:39 AM

Quote from: Trimegistus on April 25, 2016, 06:58:39 PM

Quote from: baykan on April 25, 2016, 06:38:19 PM

Hi,

first, thank you very much for this wonderful miner.
This is being one of the best miners...

I have a 5 card rig and individual pcs with single cards inside arround.
I have no problem with single gpu card pcs. They mine wonderfull.

The problematic 5 card rig,
PC mem was 4Gigabytes. Now 8. and I moded to enable 5th GPU.
the 5 card rig, with 3.2 miner, PC RESTARTS after dag file generation and approximately after 10 minutes of hashing.

Now I'm trying the 3.3 version. Hope it's not the low memory (8GB).
With Ethminer system works just fine. without crashing.

-

Is there any way you can program if the gpu temp reaches let's say 80 degrees celcius, slows hashing to keep the temp at 80
I have card 86 degrees fan is %100

Claymore you are doing a good job
Thanks in advance

I have two 6 card rigs mining flawlessly with Win7 x64 8Gb system RAM. Your problem has nothing to do with low memory but with excess heat. If your cards are at 86º and fan already at 100% you have to improve your cooling. Try adding extra fans. I use a small USB fan to push fresh air from bellow and two 120mm fans (connected to the motherboard as case fans) to pull the hot air from above.

I use the -tt 75 parameter and my cards are always around 72º with fans ~60%.

Trimegistus, it's a little bit early but. Looks like you are correct.
Ethminer also crashed my system.
Interestingly with Dual Miner PC was restarting after or during 2nd Dag file generation.
with ethminer I was thinking system was working fine, but yesterday night while I was together with my old schooll friends, drinking and having fun. Miner crashed with remote desktop unavailable.
So Instead of placing a fan in front of the 5 card rig. I moved it to the systems room which is air conditioned.
It has been more than half an hour now with dual miner working smoothly with fingers crossed.

So looks like excessive heat as you have mentioned was my problem.

Thank you very much anyway...

EDIT: more than 1 hour past. Still running....

After six hours. Still working rock solid, in the cold systems room.

Many thanks Trimegistus...

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: elzium on April 27, 2016, 05:59:46 AM

I've also had problems with dual mining while eth only was stable. One rig died, other restarted. Both were weak psu and nothing more. Gave them more juice and now works like a charm on 3.2

There is easy way to test it, start dual mode with -dcri 1 and if no problems, start to increase it while mining by pressing +. Maximum consumption is reached somewhere around -dcri 80.
Wattmeter showed me 200W extra power on 4x280x rig..

Same thing with dag creation, draws more power.

Anyone sees sent hashrate on dwarf?

I though i had a problem with the 1k watt XFX psu as well i had but i tried it with just 2 390 cards rather than the four i nonmally run and my miner still crashes in dual mode, works fine in solo eth mode.

divan0w

newbie

Activity: 43

Merit: 0

Hi, I try for first time this Dual miner, so far I mined only ETH with my 2x290(I have 4 machines with 2x290). Installed 15.12 driver and made corrections to start.bat and now looks like this:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eu1.nanopool.org:8888 -ewal 0x3d5f3243ed50c3614efbe6853bab45d1a55a5892/probt -epsw x -dpool dcr.suprnova.cc:9112 -dwal DseAYH56epfWxYmdo8XD9voCbrej9vwPpEi -dpsw x

I think all was going fine but I receive this:

16:22:43:011   13bc   checkread timeout
16:22:43:011   13bc   ETH: Job timeout, disconnect, retry in 20 sec...
16:22:44:281   13c8   checkread timeout
16:22:44:284   13c8    DCR: Job timeout, disconnect, retry in 20 sec...

Fanpant

full member

Activity: 214

Merit: 100

Quote from: kanoptx on April 27, 2016, 05:40:09 AM

Quote from: BitSquare on April 27, 2016, 04:06:41 AM

Quote from: kanoptx on April 27, 2016, 03:14:20 AM

setting ethi to 0 seemed to solve my freezing problem. please try it out before setting dual mode off or giving up altogether ^^

What was your ethi value before, the default 8. How much performance degradation after you change the ethi to 0?

it was on default. i'm getting around 20/21 mh... power consumption is the same. i should be getting around 25. will try with 3-4 intensity maybe. but that card sucks. it makes my r9 280x hotter. i'll have to make a sep rig for r9 290 and keep them seperate.

For my R9 390, I run them at -100mV and 1080/1200 MHz, they are not so hot. The temperature is about 70 degree.

baykan

full member

Activity: 133

Merit: 100

Quote from: Trimegistus on April 25, 2016, 06:58:39 PM

Quote from: baykan on April 25, 2016, 06:38:19 PM

Hi,

first, thank you very much for this wonderful miner.
This is being one of the best miners...

I have a 5 card rig and individual pcs with single cards inside arround.
I have no problem with single gpu card pcs. They mine wonderfull.

The problematic 5 card rig,
PC mem was 4Gigabytes. Now 8. and I moded to enable 5th GPU.
the 5 card rig, with 3.2 miner, PC RESTARTS after dag file generation and approximately after 10 minutes of hashing.

Now I'm trying the 3.3 version. Hope it's not the low memory (8GB).
With Ethminer system works just fine. without crashing.

-

Is there any way you can program if the gpu temp reaches let's say 80 degrees celcius, slows hashing to keep the temp at 80
I have card 86 degrees fan is %100

Claymore you are doing a good job
Thanks in advance

I have two 6 card rigs mining flawlessly with Win7 x64 8Gb system RAM. Your problem has nothing to do with low memory but with excess heat. If your cards are at 86º and fan already at 100% you have to improve your cooling. Try adding extra fans. I use a small USB fan to push fresh air from bellow and two 120mm fans (connected to the motherboard as case fans) to pull the hot air from above.

I use the -tt 75 parameter and my cards are always around 72º with fans ~60%.

Trimegistus, it's a little bit early but. Looks like you are correct.
Ethminer also crashed my system.
Interestingly with Dual Miner PC was restarting after or during 2nd Dag file generation.
with ethminer I was thinking system was working fine, but yesterday night while I was together with my old schooll friends, drinking and having fun. Miner crashed with remote desktop unavailable.
So Instead of placing a fan in front of the 5 card rig. I moved it to the systems room which is air conditioned.
It has been more than half an hour now with dual miner working smoothly with fingers crossed.

So looks like excessive heat as you have mentioned was my problem.

Thank you very much anyway...

EDIT: more than 1 hour past. Still running....

elzium

member

Activity: 96

Merit: 10

I've also had problems with dual mining while eth only was stable. One rig died, other restarted. Both were weak psu and nothing more. Gave them more juice and now works like a charm on 3.2

There is easy way to test it, start dual mode with -dcri 1 and if no problems, start to increase it while mining by pressing +. Maximum consumption is reached somewhere around -dcri 80.
Wattmeter showed me 200W extra power on 4x280x rig..

Same thing with dag creation, draws more power.

Anyone sees sent hashrate on dwarf?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: ?? on ??

Quote from: Claymore on April 26, 2016, 02:00:53 PM

I already got some feedback and logs, soon I will release an update with improvements related to CRC. Since I found that some people use DAGs from ethminer I will return compatibilty with it, but still will check CRC. To avoid freezes I will start next DAG calculation not immediately but a bit later and will do it with idle priority. Also there will be options to create several future DAGs or disable next DAG creation.

It takes like 5s to create the goddamned DAG on GPU itself - making epoch switches a breeze, too. The verification on CPU can be done with only the cache... why would you spend so much time implementing something that is more complex and sucks on top of it?

Actually I did not spend much time for CRC yet, making DAG on GPU and related changes will require more time.
But it seems it can be better to postpone other features and finally solve issues with DAGs completely.

kanoptx

sr. member

Activity: 406

Merit: 250

www.cryptocompare.com

Quote from: BitSquare on April 27, 2016, 04:06:41 AM

Quote from: kanoptx on April 27, 2016, 03:14:20 AM

setting ethi to 0 seemed to solve my freezing problem. please try it out before setting dual mode off or giving up altogether ^^

What was your ethi value before, the default 8. How much performance degradation after you change the ethi to 0?

it was on default. i'm getting around 20/21 mh... power consumption is the same. i should be getting around 25. will try with 3-4 intensity maybe. but that card sucks. it makes my r9 280x hotter. i'll have to make a sep rig for r9 290 and keep them seperate.

zorvalth

full member

Activity: 223

Merit: 100

@Claymore in my command line i use ethermine with eth-proxy:

Code:

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x8d5ad572f59fbc5bb********266d3083ea9290.RigName -epsw x -esm 0 -mode 1 -wd 1 -r 1 -dbg -1 -etha 1

Because there is no way to check if my failover is set properly does it suppose to look like that:

Code:

POOL: us1.ethermine.org:4444, WALLET: 0x8d5ad572f59fbc5bb********266d3083ea9290, PSW: x, WORKER:RigName , ESM: 0, ALLPOOLS: 0
POOL: eth-eu.dwarfpool.com:8008, WALLET: 0x8d5ad572f59fbc5bb********266d3083ea9290, PSW: x, WORKER:RigName , ESM: 0, ALLPOOLS: 0

or should i put the name of the worker after the wallet separated wit dot?

BitSquare

newbie

Activity: 28

Merit: 0

Quote from: kanoptx on April 27, 2016, 03:14:20 AM

setting ethi to 0 seemed to solve my freezing problem. please try it out before setting dual mode off or giving up altogether ^^

What was your ethi value before, the default 8. How much performance degradation after you change the ethi to 0?

kanoptx

sr. member

Activity: 406

Merit: 250

www.cryptocompare.com

setting ethi to 0 seemed to solve my freezing problem. please try it out before setting dual mode off or giving up altogether ^^

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1353. (Read 6590757 times)