Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1357. (Read 6590565 times)

Where do you see that -allpools option for every pool defined?
If devfee cannot work on a pool, you won't be able to use this pool, miner will show warning and remove this pool from the list until you add "-allpools 1" option.

i get about 1-2% rejects at zpool - still best stratum site that pays in BTC.

With BTC price high now, maybe worth it to collect in BTC.

So change your syntax to:

-dpool stratum+tcp://mine.zpool.ca:5744 -dwal <> -dpsw c=BTC,decred

I have the same problem. After generating the first DAG, the computer will crash. I may have to reduce the intensity or the clock frequency.

Use Coinme - https://www2.coinmine.pl/dcr/index.php , less than 1% rejects with stratum

Which decred pool is best atm?

I tried suprnova and pool.mn, but on both pools I see 20-25% of hashrate reported by miner 3.3 :S

Trying zpool.ca with

-dpool stratum+tcp://mine.zpool.ca:5744 -dwal DecredWallet -dpsw c=DCR,decred

But I see no accepted shares on-site :/

Claymore already stated that the dag generated by v3.2 is not compatible with v3.3

v 3.3

It's strange. After starting this version first time it says that the DAG file is corrupted on EVERY my RIG of 6. But the problem was with only one of them. The others were mining well instead. So, it looks like the DAG with the wrong CRC doesn't mean that you can't mine... Or... like something wrong with the DAG file integrity check in the miner.

But, thank you, Mr. Claymore )

ver 3.3 is bad for machines with weak cpu/hdd
Many freezes when finished generating first dag, then starting next one and attempt to start mining.
Also I had several "crc dag fail" after normal miner restart.
I'm back to 3.2 - it is cool! But I miss failover option.
Can we disable crc check somehow? I had no problem with corrupted DAG's before with Claymore miner ...

been running the miner for a couple of days now; it works great; much thanks op;

there's just that, two of my GPUs are identical sapphires but one of them warms up more than the other, one is 66 the other is 73 degrees;
their physical positions are just as they used to be and prior to this they used to average at 69 and 71;
i don't think it's effecting the operation so i'm not much worried just curious;
my other gpus temps are just as they used to be, no change;

p.s.
tried to adjust the fanspeed on the warmer gpu with afterburner, the pc just died and restarted;
should i just kill the afterburner and use miner's overclocking and temp management features?!

Blake 256 is heavier algo and accelerate the heat/...

AFAIK Dwarfpool eth-proxy is NOT supported.


2 Claymore, as I see there is -allpools option for every pool defined, what happens when my miner works on pool with
allpools 0, if dev fee won't work there?

Dual mining significantly increases the workload on your video cards, therefore they will generate a lot more heat.

Check this out:

http://cryptoage.com/en/%D0%B8%D0%BD%D1%81%D1%82%D1%80%D1%83%D0%BC%D0%B5%D0%BD%D1%82%D1%8B/%D0%BA%D0%B0%D0%BB%D1%8C%D0%BA-eth-dcr/2-uncategorised/568-claymore-double-mining-calculator-ethereum-decred.html

If I use the eth-proxy (stratum proxy) from dwarfpool (http://dwarfpool.com/static/eth-proxy-win.zip) running on localhost/local network, how do I make this program connect to it ? It already has the wallet address inside the .conf file of stratum. Or is that not supported and I must use the stratum address of dwarfpool directly ?

Another question: Are all the "shares" submitted on dwarfpool of equal value ? Or are they weighted according to the difficulty reported by the miner?

Also has anyone made some very precise calculations, considering current eth/decred prices and the performance of this merged miner, is it more profitable to mine them both with this program or just one of them?

I'm seeing DCR authorization failed... just started happening.  Using Yiimp... 

What's the failover for DCR in 3.3?  Looks like it's time to set it up.

I see. I will plan a fan system asap. Thanks.

With ethminer system is working without PC restarting, using Dual Miner is heating up the cards more ? because it's dual mining ?
May be I missed if somebody already mentioned this?

I have two 6 card rigs mining flawlessly with Win7 x64 8Gb system RAM. Your problem has nothing to do with low memory but with excess heat. If your cards are at 86º and fan already at 100% you have to improve your cooling. Try adding extra fans. I use a small USB fan to push fresh air from bellow and two 120mm fans (connected to the motherboard as case fans) to pull the hot air from above.

I use the -tt 75 parameter and my cards are always around 72º with fans ~60%.

Hi,

first, thank you very much for this wonderful miner.
This is being one of the best miners...

I have a 5 card rig and individual pcs with single cards inside arround.
I have no problem with single gpu card pcs. They mine wonderfull.

The problematic 5 card rig,
PC mem was 4Gigabytes. Now 8. and I moded to enable 5th GPU.
the 5 card rig, with 3.2 miner, PC RESTARTS after dag file generation and approximately after 10 minutes of hashing.

Now I'm trying the 3.3 version. Hope it's not the low memory (8GB).
With Ethminer system works just fine. without crashing.

-

Is there any way you can program if the gpu temp reaches let's say 80 degrees celcius, slows hashing to keep the temp at 80
I have card 86 degrees fan is %100

Claymore you are doing a good job
Thanks in advance

EDIT -
With the 3.3 version I still have the same problem.
This is the last part of the log :

02:49:54:324   f30   ETH: Share accepted (281 ms)!

02:49:54:324   f30   new buf size: 0
02:49:54:355   484   DCR: weak share, skip
02:49:54:917   f30   got 275 bytes
02:49:54:917   f30   buf: {"params": ["47637", "0x8a35dc1bbc862b27677228cc0134bfc50c49a674c7f23299ac5b8d16471b6208","0xd6a8400b7f4cc5e082e8239662ed0ee7162892f74016107a7586195f4d591efb","0x00000001310A508148DF1ECB62908D334643D83B47C1251FE95C3C06679770B6", true], "id": null, "method": "mining.notify"}

02:49:54:917   f30   parse packet: 268
02:49:54:917   f30   eth: job changed
02:49:54:917   f30   new buf size: 0
02:49:54:917   f30   ETH: 04/26/16-02:49:54 - New job (target 0x00000001310a5081) from coinotron.com:3344
02:49:54:917   f30   ETH - Total Speed: 130.335 Mh/s, Total Shares: 25, Rejected: 0, Time: 00:23
02:49:54:917   f30   ETH: GPU0 20.126 Mh/s, GPU1 28.117 Mh/s, GPU2 26.958 Mh/s, GPU3 27.749 Mh/s, GPU4 27.386 Mh/s
02:49:54:917   f30    DCR - Total Speed: 3258.371 Mh/s, Total Shares: 89, Rejected: 0
02:49:54:917   f30    DCR: GPU0 503.145 Mh/s, GPU1 702.921 Mh/s, GPU2 673.938 Mh/s, GPU3 693.713 Mh/s, GPU4 684.654 Mh/s
02:49:54:932   3dc   Job changed, drop current round
02:49:54:932   81c   Job changed, drop current round
02:49:54:932   f6c   Job changed, drop current round
02:49:54:932   630   Job changed, drop current round
02:49:54:948   950   Job changed, drop current round
02:49:54:948   528   Job changed, drop current round


Is the computer ram is not enough. When I check with the taskmanager I see more than 1 GB free.?

GPU 0 t=72C fan=74; GPU 1 t=72C fan=100; GPU 2 t=72C fan=100; GPU 3 t=72C fan=61
; GPU 4 t=72C fan=40;
I set -tt 75 apparently some fans are stuck at 100% this is in v3.2 don't have time to update atm.

Sorry about the error. It was late.

Thank You revelacaogr

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -esm 0 -ewal 0x073572819f00d3c6bbad77e6a8f247303414e4ed -epsw x  -dpool stratum+tcp://dcr.suprnova.cc:2252 -dwal Abcedarian.JG1221 -dpsw -tt 75 -r1

Wow.
I have spent some time trying to set up the wallet.
I hope that there will be a simpler way to do that, or perhaps I will get smarter.
I have set up an account at Bittrex and got an address to mine to.