Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1400.

Strannik-74

full member

Activity: 348

Merit: 102

Quote from: hepilord on April 14, 2016, 03:51:02 AM

can i mine EXP i DCR at the same time?

You can, no problem = )
Is hard to do 2 clicks and try?

Quote from: zorvalth on April 14, 2016, 04:43:32 AM

How does the temperature management works? what happens when the set temp is reached?

Throttling

DarkRavenGamer

newbie

Activity: 33

Merit: 0

Please add support for solo mining.

zorvalth

full member

Activity: 223

Merit: 100

How does the temperature management works? what happens when the set temp is reached?

MacT

full member

Activity: 141

Merit: 100

ZOHEM | DECENTRALISED USER BEHAVIOUR DATA PROTOCOL

Quote from: Claymore on April 13, 2016, 06:05:48 PM

v1.2:

if i mine only ether on my 380 card it will do 20mh, if i dual mine on intensity 30 drops to 18 mh. on 290x 28mh on eth only and 28 on dual

is it a bug or a card is weak?
and one more thing. i have 2x 380 and 1x290. the two 380 is mining on different hashrate....

My 4 identical plain 380 cards report ~ 20.7, 20.7, 20.4, and then 21.4 all at 1150/1450/-50mV 805 Watts

asidamani

newbie

Activity: 63

Merit: 0

I have 4x7990, connecting to the eu1.ethpool.org, the invalid share rate is about 10%. With the 2x7990+r9 390, the invalid rate is 1% or lower.

Any reason for that? Catalyst 15.11+ 15.12 opecl.

chup

sr. member

Activity: 737

Merit: 262

Me, Myself & I

Option for computer restart when seek GPU found would be very useful. Seek GPU could be determined if 3 (or more) consecutive hashrates of GPU are identical.

hepilord

full member

Activity: 171

Merit: 100

can i mine EXP i DCR at the same time?

feeleep

legendary

Activity: 1197

Merit: 1000

Quote from: ekrem on April 14, 2016, 01:39:56 AM

Quote from: Claymore on April 13, 2016, 06:05:48 PM

v1.2:

- Added "-allpools" option.

what need I write as an option?

eth.coinmine.pl

Code:

POOL version
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: qtminer stratum mode

ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c66","0x0a2411df535dd30bcf7b4bef6f063a1537c31f794b4
fc8270cfcba9235fdf6d9","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c57","0xaf7ae3446aba68c55d67bd87ff32c2c35c36a390366
06e33586e108b78daef9e","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c44","0x6ebba1ef976ebae4e57574383196af8e04d464534c9
191d77c62b362a67b212a","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c44","0x3d163bd4150ad8066b3fba889c68a961f6897a45ee8
05b68cfb522ff2c2a2a8c","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}

Hi - you use qtminer mode so change the port to 4001

feeleep

olajos

newbie

Activity: 46

Merit: 0

Quote from: Claymore on April 13, 2016, 06:05:48 PM

v1.2:

- Added "-ethi" option.
- Added coloring.
- "-mode" option now can be set for every card individually.
- "-dcri" option now can be set for every card individually.
- Added "-allpools" option.

Now I'm working on next version:
- will be improved performance for weak cards.
- will be improved working with DAG files (checking for DAG corruption, less errors like "creation DAG file failed", less fails when new DAG is applied to GPUs in runtime at new epoch.
- support for ETH on coinotron and suprnova: these pools use another Stratum version, I'll have to add "-esm 2" value.
- stratum for Decred.

thanks

if i mine only ether on my 380 card it will do 20mh, if i dual mine on intensity 30 drops to 18 mh. on 290x 28mh on eth only and 28 on dual

is it a bug or a card is weak?
and one more thing. i have 2x 380 and 1x290. the two 380 is mining on different hashrate....

gris

newbie

Activity: 5

Merit: 0

Quote from: MacT on April 14, 2016, 12:48:39 AM

Quote from: gris on April 14, 2016, 12:17:25 AM

ethermine.org
It can be supported? .Connect. but no data in the statistics

just do it this way in your .bat loader, after the usual setx's

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal PutYourCoinAdressHere -eworker PutArigNameHere -epsw x -esm 1

not sure if you need the -epsw x but it works for me with it. Change the us1 server part if thats not the one you use. The -esm 1 is the part that
unlocks statistics by putting you in qtminer mode, though it doesnt seem to do that for me but it did for the guy in the post above.

I have the same file.
However, no statistics display my work. Miner shows 20 mgh. The statistics shows the current 8 mgh. The average speed on the worker does not appear at all.
Only if I tried qtminer mode

Liminer

newbie

Activity: 12

Merit: 0

Quote from: Claymore on April 13, 2016, 06:05:48 PM

v1.2:
- Added coloring.

thx

+ When folder doesn't exist

Code:

-dir D:\DAG_ETH

- pls add auto create folder

ekrem

full member

Activity: 235

Merit: 100

Quote from: Claymore on April 13, 2016, 06:05:48 PM

v1.2:

- Added "-allpools" option.

what need I write as an option?

eth.coinmine.pl

Code:

POOL version
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: qtminer stratum mode

ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c66","0x0a2411df535dd30bcf7b4bef6f063a1537c31f794b4
fc8270cfcba9235fdf6d9","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c57","0xaf7ae3446aba68c55d67bd87ff32c2c35c36a390366
06e33586e108b78daef9e","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c44","0x6ebba1ef976ebae4e57574383196af8e04d464534c9
191d77c62b362a67b212a","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c44","0x3d163bd4150ad8066b3fba889c68a961f6897a45ee8
05b68cfb522ff2c2a2a8c","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}

sakuleo

jr. member

Activity: 324

Merit: 1

version 1.2 after the fee mining they only giveme rejected eth shares. back to 1.1v

MacT

full member

Activity: 141

Merit: 100

ZOHEM | DECENTRALISED USER BEHAVIOUR DATA PROTOCOL

Quote from: gris on April 14, 2016, 12:17:25 AM

ethermine.org
It can be supported? .Connect. but no data in the statistics

just do it this way in your .bat loader, after the usual setx's

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal PutYourCoinAdressHere -eworker PutArigNameHere -epsw x -esm 1

not sure if you need the -epsw x but it works for me with it. Change the us1 server part if thats not the one you use. The -esm 1 is the part that
unlocks statistics by putting you in qtminer mode, though it doesnt seem to do that for me but it did for the guy in the post above.

dominuspro

full member

Activity: 201

Merit: 100

I let the first version of the miner run on ethermine. After 24h the pool reported 24h avg hashrate was above 31Mh. Then lowering to under 28...
Just variance or something else?

I just stopped the miner and re-run the latest version 1.2. We will see

Chugumoto

full member

Activity: 162

Merit: 104

Quote from: Claymore on April 13, 2016, 06:05:48 PM

- support for ETH on coinotron and suprnova: these pools use another Stratum version, I'll have to add "-esm 2" value.

coinotron uses this stratum proxy
may be useful and will accelerate the development...
https://github.com/Coinotron/eth-stratum-mining-proxy

gris

newbie

Activity: 5

Merit: 0

ethermine.org
It can be supported? .Connect. but no data in the statistics

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: xalen on April 13, 2016, 11:45:18 PM

I have radeon R9 380 but miner recognize card as redeon 285. Is that normal?

It's ok.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: CrazyRussian on April 13, 2016, 08:18:01 PM

Pool ETH Nicehash planned support ?

Does it support Stratum? I'm not going to support pools that support HTTP only, it's not a good idea to mine there.

xalen

newbie

Activity: 20

Merit: 0

I have radeon R9 380 but miner recognize card as redeon 285. Is that normal?

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1400. (Read 6590757 times)