Author

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 1399. (Read 6590757 times)

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: ldw-com on April 14, 2016, 07:37:43 AM

Claymore,
Yes i do have better hashrate for mode 0 than for mode 1.
That's why i said it was weird :p
R9 Nano's.
170Mh Eth and 5Ghz Decred -dcri 60
160Mh(barely) Eth solo (same clocks)
I can go to 180 Eth and 8Ghz Decred, also with -dcri 60 but higher clocks.
Anyhow, it's lower when solo mining Eth. So i'm kind of forced to mine both.. Although i don't want to because it eats a lot more energy

Ok I have Nano card, so I will check/fix it soon.

Ikeet

newbie

Activity: 11

Merit: 0

i keep getting about 8-10% invalid shares from DCR anyone else having this problem?

ldw-com

full member

Activity: 229

Merit: 100

Quote from: Claymore on April 14, 2016, 06:12:30 AM

Quote from: ldw-com on April 14, 2016, 06:07:06 AM

just had some tests with ethi. Doesn't do anything (if i up it.) it only works when lowering.

However when raising dcri, hashrate of eth goes up as well. Kind of weird.

I would be a very happy person if i could raise eth intensity with an effective difference in eth hashrate.

Like i said, the only way i can raise my eth hashrate is when i raise dcri. (Which has no point when mining on mode 1)..

Any suggestions for that Claymore?

Do you have better hashrate for mode 0 than for mode 1? What card do you have? And what hashrates for both modes?

Claymore,

Yes i do have better hashrate for mode 0 than for mode 1.

That's why i said it was weird :p

R9 Nano's.

170Mh Eth and 5Ghz Decred -dcri 60

160Mh(barely) Eth solo (same clocks)

I can go to 180 Eth and 8Ghz Decred, also with -dcri 60 but higher clocks.

Anyhow, it's lower when solo mining Eth. So i'm kind of forced to mine both.. Although i don't want to because it eats a lot more energy

Charloz24

hero member

Activity: 966

Merit: 501

Quote from: Claymore on April 13, 2016, 06:05:48 PM

Now I'm working on next version:
- will be improved performance for weak cards.
- will be improved working with DAG files (checking for DAG corruption, less errors like "creation DAG file failed", less fails when new DAG is applied to GPUs in runtime at new epoch.
- support for ETH on coinotron and suprnova: these pools use another Stratum version, I'll have to add "-esm 2" value.
- stratum for Decred.

Can't wait to test this future version, I have a couple 370 here.... Grin

qqqq

legendary

Activity: 1596

Merit: 1011

Claymore, do you have any experience of implementing JSON API ? Is that possible to include it in future releases ? I like monitoring all of my farms like in cgminer.

And you are not answer me about equal time release of solo version.

BogdanEraser

newbie

Activity: 17

Merit: 0

-cclock and -mclock does not work at all (2*270x + 1*290, drv.15.7.1). All clocks can be setted through sgminer (1120 for my 270x and 1080 for 290), but then, after starting Claymore's Dual Ethereum+Decred GPU Miner, clock drops for 290 to 990.. wierd.. also, when Claymore's Dual Ethereum+Decred GPU Miner is working, MS AB can only set fan %

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: ldw-com on April 14, 2016, 06:07:06 AM

Do you have better hashrate for mode 0 than for mode 1? What card do you have? And what hashrates for both modes?

ldw-com

full member

Activity: 229

Merit: 100

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: zorvalth on April 14, 2016, 05:57:41 AM

Quote from: Claymore on April 14, 2016, 05:55:14 AM

Quote from: zorvalth on April 14, 2016, 05:47:41 AM

@Claymore , is there support for global and local work?

global work is related to "-ethi" option. Local work cannot be changed.

Thanks, one more question. The cclock and mclock are not working on my 7950 mining only ether. Is that normal?

I don't have 7xxx cards here to test. I use ATI ADL Overdrive APIs v5 and v6, if your card uses

ekrem

full member

Activity: 235

Merit: 100

Quote from: feeleep on April 14, 2016, 02:55:48 AM

Quote from: ekrem on April 14, 2016, 01:39:56 AM

Quote from: Claymore on April 13, 2016, 06:05:48 PM

v1.2:

- Added "-allpools" option.

what need I write as an option?

eth.coinmine.pl

Code:

POOL version
No pool specified for Decred! Ethereum-only mining mode is enabled
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: qtminer stratum mode

ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c66","0x0a2411df535dd30bcf7b4bef6f063a1537c31f794b4
fc8270cfcba9235fdf6d9","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.253> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c57","0xaf7ae3446aba68c55d67bd87ff32c2c35c36a390366
06e33586e108b78daef9e","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c44","0x6ebba1ef976ebae4e57574383196af8e04d464534c9
191d77c62b362a67b212a","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}
Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'eth.coinmine.pl' <164.132.109.27> port 4000
ETH: Stratum - Connected
Auth failed
: {"id":null,"method":"mining.notify","params":["2c44","0x3d163bd4150ad8066b3fba889c68a961f6897a45ee8
05b68cfb522ff2c2a2a8c","0x0016bedd7bd1a4976b855daf38926317ac50d2ff306182c9c1f0c61fddfff77b","0x000000
02dd01fc067918c87bb22ae2da831babaff47cc1f55b39398a682631f0",true]}

Hi - you use qtminer mode so change the port to 4001

feeleep

i already test all port 4000, 4001 3000 not work eth.coinmine.pl with this minner

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: Bojcha on April 14, 2016, 05:53:51 AM

what is farm-reckeck value?

This option is related for HTTP protocol, Stratum gets new job immediately as soon as pool got it for miner.

zorvalth

full member

Activity: 223

Merit: 100

Quote from: Claymore on April 14, 2016, 05:55:14 AM

Quote from: zorvalth on April 14, 2016, 05:47:41 AM

@Claymore , is there support for global and local work?

global work is related to "-ethi" option. Local work cannot be changed.

Thanks, one more question. The cclock and mclock are not working on my 7950 mining only ether. Is that normal?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: zorvalth on April 14, 2016, 05:47:41 AM

@Claymore , is there support for global and local work?

global work is related to "-ethi" option. Local work cannot be changed.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: dominuspro on April 14, 2016, 12:43:48 AM

I let the first version of the miner run on ethermine. After 24h the pool reported 24h avg hashrate was above 31Mh. Then lowering to under 28...
Just variance or something else?
I just stopped the miner and re-run the latest version 1.2. We will see

I tested ethpool.org with qtminer for about a week, and then with my miner. So perhaps it's a good idea if you start qtminer on same pool for a couple of days and then compare invalid shares rate and hashrate that pool shows. I got about +4% more hashrate on pool with my miner and only 0.1-0.2% invalid shares instead of about 2-3% for qtminer. But anyway this pool shows 3-4% less hashrate that my miner shows, perhaps it is because pools cannot reach 100% efficiency on Ethereum network because of a very short block time period.

Bojcha

hero member

Activity: 848

Merit: 500

what is farm-reckeck value?

zorvalth

full member

Activity: 223

Merit: 100

@Claymore , is there support for global and local work?

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

Quote from: Xdragon on April 14, 2016, 05:18:26 AM

coinmine.pl not working with this miner nor with "-esm 0 -allpools 1" nor with "-esm 1 -allpools 1" option. Also currently standalone Qtminer is not working too, I got message - "waiting for work package". ethminer + stratum is working.

coinmine uses another stratum implementation, it works with "mining_proxy.exe", not with "eth-proxy.exe". Same for coinotron and suprnova and I'm working on it:
https://bitcointalk.org/index.php?topic=1433925.220
In coinmine help section I see they support qtminer so you could use it, but it seems they broke its support, I cannot make it work with qtminer.

hepilord

full member

Activity: 171

Merit: 100