Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 159.

Lukke

newbie

Activity: 53

Merit: 0

Quote from: big_daddy on February 22, 2019, 09:44:08 AM

It is not dual, but is good, cause you don’t loose more than 1-2 min mining every ~2 hours
Try it and make you calcs, you’ll see that ZIL will pay the electric bills

Ah, now I understand, thank you! It seems there is a huge profitability during the 2-minute window every 2 hours, isn't it! I need to do some calculations, but I am not able find a profitability calculator - the one I found is https://www.cryptostar.asia/calculator/Zilliqa but I am not sure about an accuracy. Rig from 6 gpus would earn $10 a month - not sure if this calculation is by nonstop mining or by 2-minute window every 2 hours.

vectisitch

legendary

Activity: 1927

Merit: 1004

Quote from: big_daddy on February 22, 2019, 09:39:19 AM

Quote from: vectisitch on February 22, 2019, 08:03:58 AM

Quote from: big_daddy on February 22, 2019, 01:34:19 AM

Quote from: vectisitch on February 21, 2019, 12:41:30 PM

i don't know how to read the logs

The logs are auto-created in the Clay folder where the miner is installed

*have you tryed the -r 60 option that I’ve mentioned few posts above?

ok so i unplugged 3 of the cards that i thought might be causing it. i had 3 card going for a few hours yesterday so i deleted all old log files. i left it over night and came down to it stopped again and a whole line of log files in the bat file. i don't know how to read the logs. or what to look for.

it looks like i'm going to have to run 1 card at a time to see which one is crapping out. psu wise i have 1 card and the motherboard and ssd running off a 1000w psu. and 5 cards running off a 1200w server psu so i don't see it being that??

You can use the “-di” option added in the bat file, ex.: -di 012 to run only the first 3 cards, so run them one by one remotely and detect what card is crushing your miner

Before that, check all the cables, even smell them, to check if they are maybe burned

yep, i've decided to strip it all right down. and run 1 card till it stays stable, the ntry another card using the riser that ran the first card ect. this will be a long ass test thats for sure

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: Lukke on February 22, 2019, 09:36:48 AM

Quote from: big_daddy on February 22, 2019, 06:44:42 AM

No is not minable with Clay, but you normally run Clay, even in dual, and start ZIL mining
You set a start pow / stop pow mining procedure
Approx every 2 hours your miner will stop, 1-2 minutes will mine ZIL and than start again mining with Clay

In the folder where is the ZIL miner allocated you have to put 3 different bat files, here is my example:

start.bat

Code:

C:\MINER\Clay_v12_0\start.bat

startZIL.bat

Code:

zilminer.exe --pow-start stop.bat --pow-end start.bat --clear-dag -P zil://[email protected]:4202

stop.bat

Code:

taskkill /f /im EthDcrMiner64.exe

But this is not dual mining... I was searching for any coin, like we used to mine Decred or SIA with Claymore Dual, when the non-used parts of the GPU are being used be the second coin... Is there any these days? Or dualmining is gone?

It is not dual, but is good, cause you don’t loose more than 1-2 min mining every ~2 hours
Try it and make you calcs, you’ll see that ZIL will pay the electric bills

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: vectisitch on February 22, 2019, 08:03:58 AM

Quote from: big_daddy on February 22, 2019, 01:34:19 AM

Quote from: vectisitch on February 21, 2019, 12:41:30 PM

i don't know how to read the logs

The logs are auto-created in the Clay folder where the miner is installed

*have you tryed the -r 60 option that I’ve mentioned few posts above?

ok so i unplugged 3 of the cards that i thought might be causing it. i had 3 card going for a few hours yesterday so i deleted all old log files. i left it over night and came down to it stopped again and a whole line of log files in the bat file. i don't know how to read the logs. or what to look for.

it looks like i'm going to have to run 1 card at a time to see which one is crapping out. psu wise i have 1 card and the motherboard and ssd running off a 1000w psu. and 5 cards running off a 1200w server psu so i don't see it being that??

You can use the “-di” option added in the bat file, ex.: -di 012 to run only the first 3 cards, so run them one by one remotely and detect what card is crushing your miner

Before that, check all the cables, even smell them, to check if they are maybe burned

Lukke

newbie

Activity: 53

Merit: 0

Quote from: big_daddy on February 22, 2019, 06:44:42 AM

No is not minable with Clay, but you normally run Clay, even in dual, and start ZIL mining
You set a start pow / stop pow mining procedure
Approx every 2 hours your miner will stop, 1-2 minutes will mine ZIL and than start again mining with Clay

In the folder where is the ZIL miner allocated you have to put 3 different bat files, here is my example:

start.bat

Code:

C:\MINER\Clay_v12_0\start.bat

startZIL.bat

Code:

zilminer.exe --pow-start stop.bat --pow-end start.bat --clear-dag -P zil://[email protected]:4202

stop.bat

Code:

taskkill /f /im EthDcrMiner64.exe

But this is not dual mining... I was searching for any coin, like we used to mine Decred or SIA with Claymore Dual, when the non-used parts of the GPU are being used be the second coin... Is there any these days? Or dualmining is gone?

vectisitch

legendary

Activity: 1927

Merit: 1004

Quote from: deforester on February 22, 2019, 08:33:28 AM

Quote from: vectisitch on February 21, 2019, 08:21:59 AM

i am about to smash one of my mining rigs to bits. it's perfectly stable all day, but freezes or shuts down during the night. so i'm losing hours of mining time each 24 hours. stupid problem. i tried different risers. setting higher virtual memory. temps are fine as i've installed much higher rmp fans on all the 6 cards. they never go above 75. during the day i have the garage door open and the ystay around 55/60. 75 is not high enough to cause freezing. as i said they mine all da yever yday fine. it's jus tat nioght when i'm asleep. it's like it knows i'm not watching

Had similar problem. It's just randomly shut off. Could go for days, sometimes hours.

Switched out risers and all that, no luck. Changed port on the motherboard and after that it's all fine.

changed port???

deforester

newbie

Activity: 20

Merit: 0

Quote from: vectisitch on February 21, 2019, 08:21:59 AM

i am about to smash one of my mining rigs to bits. it's perfectly stable all day, but freezes or shuts down during the night. so i'm losing hours of mining time each 24 hours. stupid problem. i tried different risers. setting higher virtual memory. temps are fine as i've installed much higher rmp fans on all the 6 cards. they never go above 75. during the day i have the garage door open and the ystay around 55/60. 75 is not high enough to cause freezing. as i said they mine all da yever yday fine. it's jus tat nioght when i'm asleep. it's like it knows i'm not watching

Had similar problem. It's just randomly shut off. Could go for days, sometimes hours.

Switched out risers and all that, no luck. Started disconnecting cards until it was stable. The "bad" card, I just tried by changing the port on the motherboard and after that it was all good. So it ended up being the mobo port that was the culprit.

vectisitch

legendary

Activity: 1927

Merit: 1004

Quote from: big_daddy on February 22, 2019, 01:34:19 AM

Quote from: vectisitch on February 21, 2019, 12:41:30 PM

i don't know how to read the logs

The logs are auto-created in the Clay folder where the miner is installed

*have you tryed the -r 60 option that I’ve mentioned few posts above?

ok so i unplugged 3 of the cards that i thought might be causing it. i had 3 card going for a few hours yesterday so i deleted all old log files. i left it over night and came down to it stopped again and a whole line of log files in the bat file. i don't know how to read the logs. or what to look for.

it looks like i'm going to have to run 1 card at a time to see which one is crapping out. psu wise i have 1 card and the motherboard and ssd running off a 1000w psu. and 5 cards running off a 1200w server psu so i don't see it being that??

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: Lukke on February 22, 2019, 04:28:57 AM

Quote from: big_daddy on February 21, 2019, 01:24:21 AM

Quote from: Lukke on February 20, 2019, 12:02:10 PM

Guys, is any dual mining worth these days? Which dual coin is the most profitable, could be any of you so kind and share some experience with me? I used to dual mine DCR, then XVG, but these coins are useless for GPU mining today and a big mining farm generate just few dollars a month. Thanks for your help!

Moat of dual minable coins are now moned by asic machines, so is worthless to mine it wih your gpu
You can make a custom dual to mine ZIL (Ziliqa), it’s a “green” dual, power efficient

Thanks! But what do you mean by "custom dual"? So it is not mineable with Claymore Dual miner? Please, could you share some info about it?

No is not minable with Clay, but you normally run Clay, even in dual, and start ZIL mining
You set a start pow / stop pow mining procedure
Approx every 2 hours your miner will stop, 1-2 minutes will mine ZIL and than start again mining with Clay

In the folder where is the ZIL miner allocated you have to put 3 different bat files, here is my example:

start.bat

Code:

C:\MINER\Clay_v12_0\start.bat

startZIL.bat

Code:

zilminer.exe --pow-start stop.bat --pow-end start.bat --clear-dag -P zil://[email protected]:4202

stop.bat

Code:

taskkill /f /im EthDcrMiner64.exe

Lukke

newbie

Activity: 53

Merit: 0

Quote from: big_daddy on February 21, 2019, 01:24:21 AM

Quote from: Lukke on February 20, 2019, 12:02:10 PM

Guys, is any dual mining worth these days? Which dual coin is the most profitable, could be any of you so kind and share some experience with me? I used to dual mine DCR, then XVG, but these coins are useless for GPU mining today and a big mining farm generate just few dollars a month. Thanks for your help!

Moat of dual minable coins are now moned by asic machines, so is worthless to mine it wih your gpu
You can make a custom dual to mine ZIL (Ziliqa), it’s a “green” dual, power efficient

Thanks! But what do you mean by "custom dual"? So it is not mineable with Claymore Dual miner? Please, could you share some info about it?

leonix007

sr. member

Activity: 1008

Merit: 297

Grow with community

Quote from: Floemus on February 21, 2019, 12:41:48 PM

Hello,

I am beginner and I try to configure a small rig with 2 GPU.
Everything looks ok and configure (ok driver, virtual memory ok ...). As soon as I launch a minor (claymore, xmr_-stack, minergate, nicehash ...), the scrolling script and then nothing.
Do you have idea or a research track?

thank you in advance

Floemus

Sorry, what do you mean by Scrolling script? could you possibly post a screen cap?

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: vectisitch on February 21, 2019, 12:41:30 PM

i don't know how to read the logs

The logs are auto-created in the Clay folder where the miner is installed

*have you tryed the -r 60 option that I’ve mentioned few posts above?

Floemus

newbie

Activity: 3

Merit: 0

Hello,

I am beginner and I try to configure a small rig with 2 GPU.
Everything looks ok and configure (ok driver, virtual memory ok ...). As soon as I launch a minor (claymore, xmr_-stack, minergate, nicehash ...), the scrolling script and then nothing.
Do you have idea or a research track?

thank you in advance

Floemus

vectisitch

legendary

Activity: 1927

Merit: 1004

i don't know how to read the logs

bobben2

full member

Activity: 279

Merit: 104

The clue will be in the log.

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: vectisitch on February 21, 2019, 08:21:59 AM

i am about to smash one of my mining rigs to bits. it's perfectly stable all day, but freezes or shuts down during the night. so i'm losing hours of mining time each 24 hours. stupid problem. i tried different risers. setting higher virtual memory. temps are fine as i've installed much higher rmp fans on all the 6 cards. they never go above 75. during the day i have the garage door open and the ystay around 55/60. 75 is not high enough to cause freezing. as i said they mine all da yever yday fine. it's jus tat nioght when i'm asleep. it's like it knows i'm not watching

I've got the same problem last year, and since then I've added to my bat config

Code:

-r 60

it restarts my miner every 60 minutes and no problems at all anymore

vectisitch

legendary

Activity: 1927

Merit: 1004

i am about to smash one of my mining rigs to bits. it's perfectly stable all day, but freezes or shuts down during the night. so i'm losing hours of mining time each 24 hours. stupid problem. i tried different risers. setting higher virtual memory. temps are fine as i've installed much higher rmp fans on all the 6 cards. they never go above 75. during the day i have the garage door open and the ystay around 55/60. 75 is not high enough to cause freezing. as i said they mine all da yever yday fine. it's jus tat nioght when i'm asleep. it's like it knows i'm not watching

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: Lukke on February 20, 2019, 12:02:10 PM

Guys, is any dual mining worth these days? Which dual coin is the most profitable, could be any of you so kind and share some experience with me? I used to dual mine DCR, then XVG, but these coins are useless for GPU mining today and a big mining farm generate just few dollars a month. Thanks for your help!

Moat of dual minable coins are now moned by asic machines, so is worthless to mine it wih your gpu
You can make a custom dual to mine ZIL (Ziliqa), it’s a “green” dual, power efficient

Lukke

newbie

Activity: 53

Merit: 0

Guys, is any dual mining worth these days? Which dual coin is the most profitable, could be any of you so kind and share some experience with me? I used to dual mine DCR, then XVG, but these coins are useless for GPU mining today and a big mining farm generate just few dollars a month. Thanks for your help!

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: enallaxisbiz on February 19, 2019, 12:01:07 PM

Hello miners,

I want to mine at the same time for ETH and ETC.

Which command must i use?

Is this corectly? etc
<< EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.YourWorkerName -epsw x -dpool eu1-etc.ethermine.org:4444 -dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4 -dpsw x -allpools 1 -allcoins -1 >>

you can only run 2 different bat files, for example having a rig with 6 cards, 3 cards mining ETH and the other 3 cards ETC, by adding in one bat file this ->

Code:

-di 012

, and in the other

Code:

- di 345

this is the only way to mine ETH and ETC with the same rig

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 159. (Read 6590718 times)