Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 377.

Ratledge

jr. member

Activity: 84

Merit: 1

Quote from: Lamsterpaul on February 22, 2018, 02:38:36 PM

What i should set the on the -ethi switch for ETH ?
Leave it on default 8 or should i set it to 16 ?
Rigs are all stabil, will i get more shares, if I set it on 16 ? And how much I can go up ?

16 is the limit for ETH Intensity.

Lamsterpaul

newbie

Activity: 19

Merit: 0

What i should set the on the -ethi switch for ETH ?
Leave it on default 8 or should i set it to 16 ?
Rigs are all stabil, will i get more shares, if I set it on 16 ? And how much I can go up ?

cryptoillusion1

newbie

Activity: 82

Merit: 0

Quote from: mikekale on February 22, 2018, 01:20:46 PM

Quote from: FFI2013 on February 22, 2018, 10:46:39 AM

Quote from: mikekale on February 22, 2018, 10:03:45 AM

Quote from: Ursul0 on February 22, 2018, 03:28:31 AM

Quote from: mikekale on February 22, 2018, 01:14:42 AM

This is a little embarrassing but I have tried everything but cannot get v11 to work. I copied over my .bat file and for some reason the miner keeps picking a monero pool. I have tried the -epool but it comes up as a wrong unknown option. I am about to rip my hair out!

DON'T do any "bat files". put all your options into config.txt and delete dpools and epools .txt and run the executable without any parameters

Just tried that.

this is my parameters in the config.txt

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:14444 -ewal WALLET -epsw x -allpools 1 -cvddc 850,875,880 -cclock 1150,1190,1190 -mclock 2120,2045,2120 -mvddc 880,890,890 -ethi 16

and for every line it says unknown option

What am I doing wrong??

In your config.txt just put commands one lne at a time example
-epool
-ewal
Than in start.bat you put

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe

Thanks for your reply. I did exactly what you said.

When I started the miner it took the setx parameters but then the same problem

Unknown option -epool
Unknown option -ewal
^^^^^^^^ continued for every parameter in the config file
XMR: no pool specified

I downloaded this claymore v11 from the first page of the thread.

try adding -mode 1

EthDcrMiner64.exe -epool us1.ethermine.org:14444 -ewal WALLET -epsw x -allpools 1 -cvddc 850,875,880 -cclock 1150,1190,1190 -mclock 2120,2045,2120 -mvddc 880,890,890 -ethi 16 -mode 1

Maraco

newbie

Activity: 9

Merit: 0

Quote from: Claymore on February 08, 2018, 09:54:54 AM

v11.0:

- added new algorithm for dual mode: blake2s (stratum pools only), use "-dcoin blake2s" option.
- added new algorithm for dual mode: keccak (stratum pools only), use "-dcoin keccak" option.
- reduced devfee for dual mode, now it is 1.5%.
- for 2GB cards devfee is removed completely, i.e. on 2GB cards you can mine all ETH forks without devfee. Check Readme for details.
- added "-tstart" option.
- "-asm 2" option value now supports Tahiti, Tonga, Ellesmere, Baffin; in some cases it can be a bit faster in ETH-only mode.
- removed "-allcoins exp" option value.
- a few minor bug fixes and improvements.

Hi Claymore, ¿Is still needed to download this driver from AMD (Radeon Software Crimson ReLive Edition Beta for [Suspicious link removed]pute Driver for Windows® 10) in order to recover hashrate because DAG file problem?

JUPIE2008

newbie

Activity: 27

Merit: 0

Hey Guys

I am using Claymore with hiveos and in the second coin box there are a few options ......firstly it was ETH/Sia but then we got a msg saying the SIA diff went up 10X due to the release of ASICS.......could somebody please save me the almost impossible task of trying to figure this out myself.

Options are siacoin, decred,pascal,lbry,blake2s and keccak. What would be the best option to mine in dual mode if i wanted to ...... please could somebody help here. Could i use any coin in the algo group and if i could please post an example of a string as im not very PC litereate

thx in advance

JUPIE

mikekale

newbie

Activity: 7

Merit: 0

Quote from: FFI2013 on February 22, 2018, 10:46:39 AM

Quote from: mikekale on February 22, 2018, 10:03:45 AM

Quote from: Ursul0 on February 22, 2018, 03:28:31 AM

Quote from: mikekale on February 22, 2018, 01:14:42 AM

This is a little embarrassing but I have tried everything but cannot get v11 to work. I copied over my .bat file and for some reason the miner keeps picking a monero pool. I have tried the -epool but it comes up as a wrong unknown option. I am about to rip my hair out!

DON'T do any "bat files". put all your options into config.txt and delete dpools and epools .txt and run the executable without any parameters

Just tried that.

this is my parameters in the config.txt

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:14444 -ewal WALLET -epsw x -allpools 1 -cvddc 850,875,880 -cclock 1150,1190,1190 -mclock 2120,2045,2120 -mvddc 880,890,890 -ethi 16

and for every line it says unknown option

What am I doing wrong??

In your config.txt just put commands one lne at a time example
-epool
-ewal
Than in start.bat you put

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe

Thanks for your reply. I did exactly what you said.

When I started the miner it took the setx parameters but then the same problem

Unknown option -epool
Unknown option -ewal
^^^^^^^^ continued for every parameter in the config file
XMR: no pool specified

I downloaded this claymore v11 from the first page of the thread.

goodbitprofit

newbie

Activity: 67

Merit: 0

Quote from: alex_85 on February 22, 2018, 11:47:30 AM

Another question guys
after many tests for ETH+XVG mining with these settings

Code:

-cclock 1250,1250,1250,1250,1250,1280,1250,1250,1250,1250 -mclock 2210,2210,2070,2210,2210,2140,2210,2210,2210,2210 -cvddc 890,890,910,890,890,920,890,910,890,890 -mvddc 930 -dcri 49 -ethi 16 -ftime 5 -mport 0

i am getting best results without reducing ETH mining performance (at least i think soo)

I tried mining ETH+SmartCash with the same settings , onlu used dcri 7 instead of 49

Code:

-cclock 1250,1250,1250,1250,1250,1280,1250,1250,1250,1250 -mclock 2210,2210,2070,2210,2210,2140,2210,2210,2210,2210 -cvddc 890,890,910,890,890,920,890,910,890,890 -mvddc 930 -dcri 7 -ethi 16 -ftime 5 -mport 0

but now ETH performance redused - i am getting about 10% less ETH shares.
What would you suggest to change for ETH+SmartCash mining - more cclock/mclock/mvddc/cvddc?
Is ETH+keccak more core or memory intensive than ETH+XVG
Thanks

Hehe, I was also tried all day, and on final when 1 rig start ridicules behavior I just give up from dual, problem with pools, connections, blocks,...
Yes, Hash for ETC its 110%

nazarpechka

newbie

Activity: 73

Merit: 0

Quote from: l30z1n on February 22, 2018, 11:01:04 AM

@nazarpechka

The story repeats, XVGminingclub began to have disconnections and orphan blocks. I saw that you reported there was an update in the Pool, but the shares response time is still very high(>1000ms).
Will all Pools have this problem whenever they get a large amount of miners?
Are you suffering DDoS attack?

we experienced ddos. now it calmed down, but i dont know for long time or not.
if someone is profi in preventing ddos - pm me

Ratledge

jr. member

Activity: 84

Merit: 1

Quote from: Metroid on February 22, 2018, 02:08:23 AM

Quote from: ManDoneKTM on February 20, 2018, 06:31:23 PM

Quote from: Metroid on February 20, 2018, 05:33:18 PM

Quote from: ?? on ??

I know we can no longer mine Ethereum with 2gb cards

If you updated your windows 10 version then you can't with 3gb too cause the new updated windows 10 version takes 666mb and the dag file is right now at 2.33gb + 666mb = 3gb, nobody can mine eth with 3gb on windows 10 anymore.

i am mining with 3gb card

Do not update, if you do then gameover.

Quote from: tg88 on February 20, 2018, 06:30:38 PM

Quote from: Metroid on February 20, 2018, 05:33:18 PM

Quote from: ?? on ??

I know we can no longer mine Ethereum with 2gb cards

If you updated your windows 10 version then you can't with 3gb too cause the new updated windows 10 version takes 666mb and the dag file is right now at 2.33gb + 666mb = 3gb, nobody can mine eth with 3gb on windows 10 anymore.

Is this a recent update?

Yes.

Has anyone tried moving the 3gb 1060 to any other than the primary GPU (pci 0:0:0)?

It seems like Windows would only mess up the primary card. My 3gb 1060 is off for repairs / replacement, so unable to try myself.

alex_85

newbie

Activity: 55

Merit: 0

Another question guys
after many tests for ETH+XVG mining with these settings

Code:

-cclock 1250,1250,1250,1250,1250,1280,1250,1250,1250,1250 -mclock 2210,2210,2070,2210,2210,2140,2210,2210,2210,2210 -cvddc 890,890,910,890,890,920,890,910,890,890 -mvddc 930 -dcri 49 -ethi 16 -ftime 5 -mport 0

i am getting best results without reducing ETH mining performance (at least i think soo)

I tried mining ETH+SmartCash with the same settings , onlu used dcri 7 instead of 49

Code:

-cclock 1250,1250,1250,1250,1250,1280,1250,1250,1250,1250 -mclock 2210,2210,2070,2210,2210,2140,2210,2210,2210,2210 -cvddc 890,890,910,890,890,920,890,910,890,890 -mvddc 930 -dcri 7 -ethi 16 -ftime 5 -mport 0

but now ETH performance redused - i am getting about 10% less ETH shares.
What would you suggest to change for ETH+SmartCash mining - more cclock/mclock/mvddc/cvddc?
Is ETH+keccak more core or memory intensive than ETH+XVG
Thanks

adnetcoin

newbie

Activity: 51

Merit: 0

minergategpu.org

Adnetcoin (ADNET) Mining Pool

Mining Hardware:   GPU

Algorithm:   Equihash

Payout threshold:   0.1 ADNET

Payouts run:   30 minutes

Miners:   15

Pool Hashrate:   19.20 KSol/s

Network Hashrate:   19.37 KSol/s

Network Difficulty:   312

Block Height: 11290

Getting started: https://minergategpu.org/

Adnetcoin

Announcement: https://bitcointalksearch.org/topic/ann-adnetcoin-launched-equihash-gpu-mining-2886419

Download: https://adnetcoin.cash/download

l30z1n

newbie

Activity: 46

Merit: 0

@nazarpechka

The story repeats, XVGminingclub began to have disconnections and orphan blocks. I saw that you reported there was an update in the Pool, but the shares response time is still very high(>1000ms).
Will all Pools have this problem whenever they get a large amount of miners?
Are you suffering DDoS attack?

FFI2013

hero member

Activity: 906

Merit: 507

Quote from: mikekale on February 22, 2018, 10:03:45 AM

Quote from: Ursul0 on February 22, 2018, 03:28:31 AM

Quote from: mikekale on February 22, 2018, 01:14:42 AM

This is a little embarrassing but I have tried everything but cannot get v11 to work. I copied over my .bat file and for some reason the miner keeps picking a monero pool. I have tried the -epool but it comes up as a wrong unknown option. I am about to rip my hair out!

DON'T do any "bat files". put all your options into config.txt and delete dpools and epools .txt and run the executable without any parameters

Just tried that.

this is my parameters in the config.txt

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:14444 -ewal WALLET -epsw x -allpools 1 -cvddc 850,875,880 -cclock 1150,1190,1190 -mclock 2120,2045,2120 -mvddc 880,890,890 -ethi 16

and for every line it says unknown option

What am I doing wrong??

In your config.txt just put commands one lne at a time example
-epool
-ewal
Than in start.bat you put

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe

mikekale

newbie

Activity: 7

Merit: 0

Quote from: Ursul0 on February 22, 2018, 03:28:31 AM

Quote from: mikekale on February 22, 2018, 01:14:42 AM

This is a little embarrassing but I have tried everything but cannot get v11 to work. I copied over my .bat file and for some reason the miner keeps picking a monero pool. I have tried the -epool but it comes up as a wrong unknown option. I am about to rip my hair out!

DON'T do any "bat files". put all your options into config.txt and delete dpools and epools .txt and run the executable without any parameters

Just tried that.

this is my parameters in the config.txt

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool us1.ethermine.org:14444 -ewal WALLET -epsw x -allpools 1 -cvddc 850,875,880 -cclock 1150,1190,1190 -mclock 2120,2045,2120 -mvddc 880,890,890 -ethi 16

and for every line it says unknown option

What am I doing wrong??

ampsdc

newbie

Activity: 4

Merit: 0

Quote from: Ratledge on February 21, 2018, 05:34:40 PM

Quote from: ampsdc on February 21, 2018, 05:14:21 PM

Quote from: Teress on February 21, 2018, 02:24:46 PM

NO IT IS NOT TRUE! You CAN run mix of AMD and NVIDIA cards within one miner.

Thanks for clarifying, as I was mining with 6x amd and 6 x nvidia cards with the one miner.

Just need to figure out what the problem is with my claymore!!! and why its crashing my pc and not detecting my CUDA devices and only mining with 3 amd devices disabled.

Back to basics: I hate to make any assumptions, but you say it was working? I was thinking maybe you don't have the Cuda software installed? ("nSight")

Quite possibly, will follow this up, thanks buddy!

goodbitprofit

newbie

Activity: 67

Merit: 0

Quote from: woodaxe on February 22, 2018, 09:04:33 AM

Quote from: goodbitprofit on February 22, 2018, 08:43:31 AM

Lets houpe that I find some nice Keccak pool Wink

SMART coin

RX580 and RX480 - DCRI 7
Little drop ETC hash, but its ok

Code:

STRATUM:	stratum+tcp://smart.suprnova.cc
PORT:	4192
Username:	Weblogin.Worker
Password:	Worker Password

You need to register, and few hours a go we started again to bring live this pool and coin.

Every body are welcome Grin

Smart coin doesnt show up on suprnovas website

https://smart.suprnova.cc/

One hour before, only 11 was, now 80 and we are increasing. We just need to find first last block, to start a new and fresh.

Amstellodamois

newbie

Activity: 182

Merit: 0

Quote from: Ratledge on February 21, 2018, 02:50:11 PM

Now someone is bound to point out that what I said isn't 100% because it doesn't change the parameters passed on the command-line, but you can do that, too.

Yeah but you have to restart the miner, it will restart from basic stratum difficulty, reload DAG etc...you loose a few seconds of mining.

woodaxe

member

Activity: 129

Merit: 10

Quote from: goodbitprofit on February 22, 2018, 08:43:31 AM

Lets houpe that I find some nice Keccak pool Wink

SMART coin

RX580 and RX480 - DCRI 7
Little drop ETC hash, but its ok

Code:

STRATUM:	stratum+tcp://smart.suprnova.cc
PORT:	4192
Username:	Weblogin.Worker
Password:	Worker Password

You need to register, and few hours a go we started again to bring live this pool and coin.

Every body are welcome Grin

Smart coin doesnt show up on suprnovas website

ccminer.net

sr. member

Activity: 595

Merit: 251

Quote from: ccminer.net on February 22, 2018, 04:50:46 AM

Quote from: leonix007 on February 21, 2018, 08:20:48 PM

Quote from: ccminer.net on February 21, 2018, 07:24:39 PM

Hello guys

I have a problem, i have a rig with 8 cards, in single eth works fine! when I tried to dual with the last version of the miner, it worked for few days, than I GPU (the #7) drop the hashrate to 0 and I got this error

Code:

WATCHDOG: GPU error, you need to restart miner

I tried to reduce the intensity but nothing!
What should I do?

The cards are RX570 nitro plus (*4) and RX570 mini(*4) both of them 4gb

try to replace the risers, most probably that's the culprit.

I'll try thx, but may I ask why you think the rise should be the problem?

Apparently it works I'll run more tests later!

Thx

Merit sent Wink

goodbitprofit

newbie

Activity: 67

Merit: 0

Lets houpe that I find some nice Keccak pool Wink

SMART coin

RX580 and RX480 - DCRI 7
Little drop ETC hash, but its ok

Code:

STRATUM:	stratum+tcp://smart.suprnova.cc
PORT:	4192
Username:	Weblogin.Worker
Password:	Worker Password

You need to register, and few hours a go we started again to bring live this pool and coin.

Every body are welcome Grin

NOT FUNDED BLOCK - SOMETHING WRONG WITH SMART NETWORK !!!

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 377. (Read 6590718 times)