Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 384.

FFI2013

hero member

Activity: 906

Merit: 507

Quote from: Metroid on February 20, 2018, 07:14:05 PM

Quote from: bskc on February 20, 2018, 03:18:37 AM

Hi blake2s dual miner's,

Claymore new blake2s dual mining offers new opportunities of mining. It seems like all the community get interested to this algorithm. All pools were immediately cannibalized by this hashrate.

Blake2s coins are often hosted on little and often new pool. Pool operators are working hard to avoid disconnections, to support increasing hashrate and miners,…

Lots of work, fixes, patches, coffees, nightmares, new servers, coffees again… Unimining jumped from 1000 miners to 35000 miners in few days only on the blake2s! That’s amazing!

Thanks to all (remaining) miners mining on UniMining. Thanks for your confidence. We do our best every day to ensure the best quality of services, investigating and acting on every bottleneck! Some fixes should still be implemented.

We apologize if you get bad earnings and we are still working on it. If you have the solution or any suggestions… or stop blaming us on all post;

Have a nice day.

This --> bskc member must be a legendary thief, I'm mean to come up here and say --> "hey, we at unimining are stealing you trolls and we love doing so, keep coming cause we are getting all your coins and don't worry cause we said --> Have a nice day" hehe

Fucking amazing isn't it your running a pool but tell us to stop bitching because your paying half of what everyone else is, YA I have a solution shut down your pool till you figure it out or maybe get a hold of ocminer for some help on how to run a pool

xxoanser

newbie

Activity: 16

Merit: 0

i have 2200 mhs in keccack, in the last 3 hours i dont have earnings, any with the same problem?

siribo4134

newbie

Activity: 5

Merit: 0

Which dual mining coin is the best now ?

I'm mining ETH+SC but sc is now not the good investment. Anyone has any recommendation?

ysakay

sr. member

Activity: 616

Merit: 259

I mine xvg at zpool but i write my wallet at zpool,there is DGB coins.

https://www.zpool.ca/?address=DPqkhuNKCgawmqb1ACcKPppebfzTQdbYmw

What's the problem? I never mined dgb and i don't have this wallet. This is my Verge wallet lol. like this;
http://nlpool.nl/?address=DPqkhuNKCgawmqb1ACcKPppebfzTQdbYmw+

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

Quote from: bskc on February 20, 2018, 03:18:37 AM

Hi blake2s dual miner's,

Claymore new blake2s dual mining offers new opportunities of mining. It seems like all the community get interested to this algorithm. All pools were immediately cannibalized by this hashrate.

Blake2s coins are often hosted on little and often new pool. Pool operators are working hard to avoid disconnections, to support increasing hashrate and miners,…

Lots of work, fixes, patches, coffees, nightmares, new servers, coffees again… Unimining jumped from 1000 miners to 35000 miners in few days only on the blake2s! That’s amazing!

Thanks to all (remaining) miners mining on UniMining. Thanks for your confidence. We do our best every day to ensure the best quality of services, investigating and acting on every bottleneck! Some fixes should still be implemented.

We apologize if you get bad earnings and we are still working on it. If you have the solution or any suggestions… or stop blaming us on all post;

Have a nice day.

This --> bskc member must be a legendary thief, I'm mean to come up here and say --> "hey, we at unimining are stealing you trolls and we love doing so, keep coming cause we are getting all your coins and don't worry cause we said --> Have a nice day" hehe

mine_phun

newbie

Activity: 208

Merit: 0

Quote from: Ratledge on February 20, 2018, 06:49:15 PM

Quote from: cryptoillusion1 on February 20, 2018, 06:36:42 PM

Verge Vanished from NL POOL

@mine_phun
@ nlpool.nl

see topic https://bitcointalksearch.org/topic/m.30721962

Something is wrong. I had about 2.1 XVG pending payment and now find nothing, including my history is gone.

In case you miss something, just send us a e-mail with your XVG address and we will fix it.

mine_phun

newbie

Activity: 208

Merit: 0

Quote from: Ratledge on February 20, 2018, 06:49:15 PM

Quote from: cryptoillusion1 on February 20, 2018, 06:36:42 PM

Verge Vanished from NL POOL

@mine_phun
@ nlpool.nl

see topic https://bitcointalksearch.org/topic/m.30721962

Something is wrong. I had about 2.1 XVG pending payment and now find nothing, including my history is gone.

We are upgrading our pool to new servers to deal with the load.

In order to do this, we have to let people start with a new balance. The old server will stay online and process your balance , so you will get it wired, you just don't see it.

Ratledge

jr. member

Activity: 84

Merit: 1

Quote from: cryptoillusion1 on February 20, 2018, 06:36:42 PM

Verge Vanished from NL POOL

@mine_phun
@ nlpool.nl

see topic https://bitcointalksearch.org/topic/m.30721962

Something is wrong. I had about 2.1 XVG pending payment and now find nothing, including my history is gone.

cryptoillusion1

newbie

Activity: 82

Merit: 0

Verge Vanished from NL POOL

@mine_phun
@ nlpool.nl

see topic https://bitcointalksearch.org/topic/m.30721962

_voyager_

newbie

Activity: 12

Merit: 0

Etherium only mining in "-mode 1"
I am using -dcri 6 because it gives me highest hashrate but I am not sure about -ethi parameter because I don't see any difference in hashrate between vaues 8 or 16. What value do yiu use?

ManDoneKTM

newbie

Activity: 150

Merit: 0

Quote from: Metroid on February 20, 2018, 05:33:18 PM

Quote from: ?? on ??

I know we can no longer mine Ethereum with 2gb cards

If you updated your windows 10 version then you can't with 3gb too cause the new updated windows 10 version takes 666mb and the dag file is right now at 2.33gb + 666mb = 3gb, nobody can mine eth with 3gb on windows 10 anymore.

i am mining with 3gb card

tg88

legendary

Activity: 2492

Merit: 1429

Payment Gateway Allows Recurring Payments

Quote from: Metroid on February 20, 2018, 05:33:18 PM

Quote from: ?? on ??

I know we can no longer mine Ethereum with 2gb cards

If you updated your windows 10 version then you can't with 3gb too cause the new updated windows 10 version takes 666mb and the dag file is right now at 2.33gb + 666mb = 3gb, nobody can mine eth with 3gb on windows 10 anymore.

Is this a recent update?

goodbitprofit

newbie

Activity: 67

Merit: 0

Quote from: cryptoillusion1 on February 20, 2018, 05:31:33 PM

I presume you are mining ETC ? I ask since you state you use allcoins-1 which is for the forks
If it is ETC then try "-allcoins etc"

Thanks, but it also clearly write on first page and in readme file about ETC.

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

Quote from: ?? on ??

I know we can no longer mine Ethereum with 2gb cards

If you updated your windows 10 version then you can't with 3gb too cause the new updated windows 10 version takes 666mb and the dag file is right now at 2.33gb + 666mb = 3gb, nobody can mine eth with 3gb on windows 10 anymore.

cryptoillusion1

newbie

Activity: 82

Merit: 0

Quote from: shynepapin on February 20, 2018, 05:06:19 PM

Quote from: goodbitprofit on February 20, 2018, 02:51:30 PM

Quote from: shynepapin on February 20, 2018, 02:06:06 PM

I don't know if anyone is having the same issue as I have with Claymore V11.0. Miner crashes and causes Rig to restart when the next DEV Fee mining starts creating DAG. I use allcoins -1 to help combat this but to no avail, which does create ETH Dag file when claymore miner starts, mines dev fee only then before crashing at next dev fee mining.

I've also tried the -eres 3 option, so memory is allocation for 3 dag file buffers before memory reallocation, still the same problem at the 2 hour mark or less some times, miner crashes with random GPU memory errors. I have reduced my memory clock drastically to figure out what's really causing this, if it's overclocking, but rig runs stable without any memory errors until dev fee mining returns and then rig crashes with any random gpu memory error.

Any help with this would be appreciated as this is a plague on 2 of my RX570 rigs.

I was update to 11 few weeks a go, but same problem only started from today. After Dev fee, speed just drop, and after half hour restart.
Wondering what can be a problem?

I almost thought I was going to be the only one having this issue but its good to see I'm not the only one. But, one fear is the issue would get swamp with all this pool and verge talk that Claymore might not see it and no suggestions would be made as to how to resolve it. I do have my .bat file in my startup folder so whenever rig crashes and restart I can get back to mining but unfortunately that is not enough to undermine the issue as sometimes rig crashes and restart gets stuck.

Anyway, I'll be working continue on the issue and as soon as I find a stable enough solution, I will share with you, because for me this has been happening for a while and I have always thought it was due to undervolting or overclocking and I have basically had my 14 GPU's on these 2 rigs back to default and still no improvement.

Will try to reinstall windows 10 entirely soon and hope that helps but can't get to that till probably the weekend.

I presume you are mining ETC ? I ask since you state you use allcoins-1 which is for the forks
If it is ETC then try "-allcoins etc"

shynepapin

newbie

Activity: 19

Merit: 3

Quote from: goodbitprofit on February 20, 2018, 02:51:30 PM

Quote from: shynepapin on February 20, 2018, 02:06:06 PM

I don't know if anyone is having the same issue as I have with Claymore V11.0. Miner crashes and causes Rig to restart when the next DEV Fee mining starts creating DAG. I use allcoins -1 to help combat this but to no avail, which does create ETH Dag file when claymore miner starts, mines dev fee only then before crashing at next dev fee mining.

I've also tried the -eres 3 option, so memory is allocation for 3 dag file buffers before memory reallocation, still the same problem at the 2 hour mark or less some times, miner crashes with random GPU memory errors. I have reduced my memory clock drastically to figure out what's really causing this, if it's overclocking, but rig runs stable without any memory errors until dev fee mining returns and then rig crashes with any random gpu memory error.

Any help with this would be appreciated as this is a plague on 2 of my RX570 rigs.

I was update to 11 few weeks a go, but same problem only started from today. After Dev fee, speed just drop, and after half hour restart.
Wondering what can be a problem?

I almost thought I was going to be the only one having this issue but its good to see I'm not the only one. But, one fear is the issue would get swamp with all this pool and verge talk that Claymore might not see it and no suggestions would be made as to how to resolve it. I do have my .bat file in my startup folder so whenever rig crashes and restart I can get back to mining but unfortunately that is not enough to undermine the issue as sometimes rig crashes and restart gets stuck.

Anyway, I'll be working continue on the issue and as soon as I find a stable enough solution, I will share with you, because for me this has been happening for a while and I have always thought it was due to undervolting or overclocking and I have basically had my 14 GPU's on these 2 rigs back to default and still no improvement.

Will try to reinstall windows 10 entirely soon and hope that helps but can't get to that till probably the weekend.

cryptoillusion1

newbie

Activity: 82

Merit: 0

Quote from: ?? on ??

Anyone else have v11 (upgraded from 10.3 or 10.4 I believe) not showing any shares on ethermine.org beta or standard site? I had one of the bypass dev-fees in the folder before but its no longer in there with the new version I'm trying (v11_0).

I kept the batch file super simple incase I made any errors or any of the old flags were discontinued (esm and asm)

Code:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x5cBD1D2E04f109f5dCB7620A550c04677d8064E8 -epsw x -mode 1 -dbg -1 -di 3

Let me know thanks. It doesnt even snow my miner online.

Add your "Rig Name"

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal . -epsw x

JanxSpirit86

newbie

Activity: 3

Merit: 0

Quote from: sentel on February 20, 2018, 02:39:20 PM

Quote from: JanxSpirit86 on February 20, 2018, 02:22:08 PM

Quote from: ?? on ??

why is tht nobody talks about keccak...i think its also doin good compared to xvg at the moment with al the pool problems..mining smartcash at 365mhs and 61mhs eth wit my 2 rx580 armor oc.is it fine...wht do u guys think...

Very good indeed. Thanks!
I got the same results 6 x rx580 184eth, 1100smart. Sweet spot dcri 6.

Which is the pool?

pool-eu.smartcash.cc

Deadly0

newbie

Activity: 3

Merit: 0

Quote from: JJF on February 20, 2018, 03:16:00 PM

You have an error in login/pass - at least for pool-eu.smartcash.cc
Refer to their Getting Started Guide for correct settings. You need to register, add worker in settings - and specify your login and worker in the config. Just like for suprnova.

Quote from: fanisk21 on February 20, 2018, 03:12:02 PM

you need to use your login and pw of work

https://i.imgur.com/AgjhKYv.png

Thank you! I really missed the registration.

Quote from: argai666 on February 20, 2018, 03:17:05 PM

i thought CREA 's algorithm is Keccak-C which is different from Keccak. However I never tried mining, i don't know if it is work with this v11.0 dual miner

Thanks! I thought Keccak-C and Keccak are names for the same algorithm, but not. CREA is not supported by Claymore Sad

argai666

newbie

Activity: 33

Merit: 0

Quote from: Deadly0 on February 20, 2018, 03:09:24 PM

Is someone tried to mine keccak coins? I've tried to mine CREA and Smart Cash but all my shares were rejected!
My configs:

Code:

# CREA
POOL: stratum+tcp://yiimp.eu:5134, WALLET: CShBAVkbYJ9536nrLNnEfL12tkvQy2NbqS
POOL: stratum+tcp://stratum.rapidpools.com:3032, WALLET: CShBAVkbYJ9536nrLNnEfL12tkvQy2NbqS.rig01, PSW: x
POOL: stratum+tcp://s1.creapool.club:5134, WALLET: CShBAVkbYJ9536nrLNnEfL12tkvQy2NbqS.rig01, PSW: x

# Smart Cash
POOL: stratum+tcp://pool-eu.smartcash.cc:3333, WALLET: SP9zMdYushh3bM9cYEvWdF2y52sai4xnFf.rig01, PSW: x

and -dcoin keccak
What am i doing wrong?

i thought CREA 's algorithm is Keccak-C which is different from Keccak. However I never tried mining, i don't know if it is work with this v11.0 dual miner

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 384. (Read 6590718 times)