Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 387.

krasent

newbie

Activity: 18

Merit: 0

Quote from: voonyaka on February 20, 2018, 08:56:29 AM

-dpool stratum+tcp//xvg.antminepool.com:9008
-dwal YOUR XVG WALLET HERE
-dcoin blake2s
-dpsw c=XVGB
-dcri 135 if NVIDIA
-dcri 53 if RADEON
TRY IT Wink

Only there I tried it, tonight will test Roll Eyes

ascaloon

newbie

Activity: 36

Merit: 0

Quote from: valev1 on February 20, 2018, 08:29:15 AM

Quote from: doktor83 on February 19, 2018, 10:28:27 AM

Guys, if you have problems with XVG pools, try ours :

-dcoin blake2s -dpool stratum+tcp://mining.oxo.rs:4444 -dwal -dpsw c=XVG

time ti try this mining.oxo.rs:4444 XVG pool, other full or down or steal ...

Yesterday I was on oxo.rs with all my 3 rigs for 8 hours and nothing happend 0.00000 xvg mined in last 50 earnings nothing show`s btw in that period pool found 2 blocks. Nothing GOOD to say about oxo.

Tomee

newbie

Activity: 11

Merit: 0

Quote from: krasent on February 20, 2018, 08:40:11 AM

Quote from: valev1 on February 20, 2018, 08:29:15 AM

Quote from: doktor83 on February 19, 2018, 10:28:27 AM

Guys, if you have problems with XVG pools, try ours :

-dcoin blake2s -dpool stratum+tcp://mining.oxo.rs:4444 -dwal -dpsw c=XVG

time ti try this mining.oxo.rs:4444 XVG pool, other full or down or steal ...

http://mining.oxo.rs/site/mining - Orphan... Orphan.... Orphan....

Old song... new voice....

the oxo.rs scam, i got 0 xvg

fluxy12

jr. member

Activity: 145

Merit: 1

Quote from: bskc on February 20, 2018, 04:18:37 AM

Hi blake2s dual miner's,

Claymore new blake2s dual mining offers new opportunities of mining. It seems like all the community get interested to this algorithm. All pools were immediately cannibalized by this hashrate.

Blake2s coins are often hosted on little and often new pool. Pool operators are working hard to avoid disconnections, to support increasing hashrate and miners,…

Lots of work, fixes, patches, coffees, nightmares, new servers, coffees again… Unimining jumped from 1000 miners to 35000 miners in few days only on the blake2s! That’s amazing!

Thanks to all (remaining) miners mining on UniMining. Thanks for your confidence. We do our best every day to ensure the best quality of services, investigating and acting on every bottleneck! Some fixes should still be implemented.

We apologize if you get bad earnings and we are still working on it. If you have the solution or any suggestions… or stop blaming us on all post;

Have a nice day.

Are you joking ? your earnings are ridiculous compare to other pools and despite of that you want us to give you a solution ? i have one for you : remove your fingers from your a.. and stop stealing people.

i don't understand how more than 40k miners can waste their time and hashrate on this pool.

voonyaka

newbie

Activity: 1

Merit: 0

-dpool stratum+tcp//xvg.antminepool.com:9008
-dwal YOUR XVG WALLET HERE
-dcoin blake2s
-dpsw c=XVGB
-dcri 135 if NVIDIA
-dcri 53 if RADEON
TRY IT Wink

Munka9

newbie

Activity: 30

Merit: 0

Quote from: Metroid on February 20, 2018, 07:37:54 AM

Quote from: adyspd on February 20, 2018, 06:33:02 AM

We can't stop blaming you, everyone needs to know the truth !
Compared to some other pools you are stealing arround 50% of the income ( if it's server issues or whatever else it's just your problem, but as long other pools can credit 100%, it's just stealing ).
You can ask for a higher fee, set pool user limit, etc, don't just let ppl think they will earn X ammount of coins based on their hashpower and you pay like 50%.
With all the mising coins in like 1 week, and with the hashpower from blake2s-unimining, you could earn like thousands of $$, please play fair.

Thanks.

There is no point telling a thief not to steal, the best thing is competition, if we get a good pool that pays honestly then those thieves will have to change their way cause if not then nobody will be mining in their pool.

This is worse than that, steal and launch denial of service attacks on the competition at the same time!

I actually don't think all the pools are stealing though.

krasent

newbie

Activity: 18

Merit: 0

Quote from: valev1 on February 20, 2018, 08:29:15 AM

Quote from: doktor83 on February 19, 2018, 10:28:27 AM

Guys, if you have problems with XVG pools, try ours :

-dcoin blake2s -dpool stratum+tcp://mining.oxo.rs:4444 -dwal -dpsw c=XVG

time ti try this mining.oxo.rs:4444 XVG pool, other full or down or steal ...

http://mining.oxo.rs/site/mining - Orphan... Orphan.... Orphan....

Old song... new voice....

Neu_Cinetico

newbie

Activity: 46

Merit: 0

Quote from: valev1 on February 20, 2018, 08:29:15 AM

Quote from: doktor83 on February 19, 2018, 10:28:27 AM

Guys, if you have problems with XVG pools, try ours :

-dcoin blake2s -dpool stratum+tcp://mining.oxo.rs:4444 -dwal -dpsw c=XVG

time ti try this mining.oxo.rs:4444 XVG pool, other full or down or steal ...

Report if u get accept on OXO plz

valev1

newbie

Activity: 26

Merit: 0

Quote from: doktor83 on February 19, 2018, 10:28:27 AM

Guys, if you have problems with XVG pools, try ours :

-dcoin blake2s -dpool stratum+tcp://mining.oxo.rs:4444 -dwal -dpsw c=XVG

time ti try this mining.oxo.rs:4444 XVG pool, other full or down or steal ...

goodbitprofit

newbie

Activity: 67

Merit: 0

Quote from: Amkolino on February 20, 2018, 07:37:02 AM

Guys, what are you mining now with the new possibilities of Dual Mining by Claymores Miner?

Which coins goes best? Which coins do not lower the eth mining too much?

I liked eth/sia in the past very much - Others I was not liking (eth/dcr e.g.)

Let's say my rig has right now 220 mh/s.

What would be the impact with the new coins? With Sia it was like 217 mh/s and 2170 /s for Sia. I like that really :-)

Anyone already using new algorithms etc.? Which pool? which coin? whats your single eth speed and what dual speed eth + x ?

Thanks a lot and best regards!

I was mine PASC few days a go, not that also forgot. One rig I use ETC and XVG, and on Second MUSIC and XVG.
XVG have big problems with pools, so for Now Antimepool I am using, but it seems less profit for at least 30-50%

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

Quote from: Rulezz on February 20, 2018, 08:21:40 AM

unimining.net is ofcourse stealing miners, i recieve half of income with the same hashrate

All of them are stealing, antminer, unimining, zcapool, nlpool and others on their own way.

Rulezz

newbie

Activity: 6

Merit: 0

Quote from: Metroid on February 20, 2018, 07:37:54 AM

Quote from: adyspd on February 20, 2018, 06:33:02 AM

We can't stop blaming you, everyone needs to know the truth !
Compared to some other pools you are stealing arround 50% of the income ( if it's server issues or whatever else it's just your problem, but as long other pools can credit 100%, it's just stealing ).
You can ask for a higher fee, set pool user limit, etc, don't just let ppl think they will earn X ammount of coins based on their hashpower and you pay like 50%.
With all the mising coins in like 1 week, and with the hashpower from blake2s-unimining, you could earn like thousands of $$, please play fair.

Thanks.

There is no point telling a thief not to steal, the best thing is competition, if we get a good pool that pays honestly then those thieves will have to change their way cause if not then nobody will be mining in their pool.

unimining.net is ofcourse stealing miners, i recieve half of income with the same hashrate

RAKOT

jr. member

Activity: 152

Merit: 8

Quote from: silvi0 on February 20, 2018, 06:40:35 AM

Quote from: RAKOT on February 20, 2018, 06:29:13 AM

Hello Everyone!

Could somebody help me to solve my isssu ?

Ive got an headache trying to figure out this problem. In some time one of GPUs show 0 hashrate. CM trying to restart itself and no good.

It repeats the same message over and over until i restart whole rig.

GPUs are with modded bios.

10:09:05:728   174c   WATCHDOG: GPU 2 hangs in OpenCL call, exit
10:09:05:743   174c   WATCHDOG: GPU 2 hangs in OpenCL call, exit

10:09:16:800   174c   Restarting OK, exit...

Help please....

GPU 2 hangs.. Detach that GPU and try if the problems are solved, after that reinstall that GPU (Modding and driver)
[/quote]

Well , thank you . Ill do it. But why CM cannot properly restart itself ?

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

Quote from: adyspd on February 20, 2018, 06:33:02 AM

We can't stop blaming you, everyone needs to know the truth !
Compared to some other pools you are stealing arround 50% of the income ( if it's server issues or whatever else it's just your problem, but as long other pools can credit 100%, it's just stealing ).
You can ask for a higher fee, set pool user limit, etc, don't just let ppl think they will earn X ammount of coins based on their hashpower and you pay like 50%.
With all the mising coins in like 1 week, and with the hashpower from blake2s-unimining, you could earn like thousands of $$, please play fair.

Thanks.

There is no point telling a thief not to steal, the best thing is competition, if we get a good pool that pays honestly then those thieves will have to change their way cause if not then nobody will be mining in their pool.

Amkolino

newbie

Activity: 42

Merit: 0

Guys, what are you mining now with the new possibilities of Dual Mining by Claymores Miner?

Which coins goes best? Which coins do not lower the eth mining too much?

I liked eth/sia in the past very much - Others I was not liking (eth/dcr e.g.)

Let's say my rig has right now 220 mh/s.

What would be the impact with the new coins? With Sia it was like 217 mh/s and 2170 /s for Sia. I like that really :-)

Anyone already using new algorithms etc.? Which pool? which coin? whats your single eth speed and what dual speed eth + x ?

Thanks a lot and best regards!

munGoMine

newbie

Activity: 8

Merit: 0

Quote from: Swiped on February 20, 2018, 05:14:50 AM

Getting this error while running version 10.6 and can't figure out how to stop it:

03:36:40:155   1200   GPU 0 temp = 69, old fan speed = 50, new fan speed = 40

03:36:40:171   1200   GPU 1 temp = 68, old fan speed = 49, new fan speed = 40

03:36:40:186   1200   GPU 2 temp = 68, old fan speed = 55, new fan speed = 40

03:36:40:233   1200   GPU 3 temp = 72, old fan speed = 69, new fan speed = 58

03:36:40:249   1200   GPU 4 temp = 74, old fan speed = 63, new fan speed = 53

03:36:40:280   1200   GPU 5: got incorrect temperature 511, ignore
03:36:40:280   1200   GPU 6: got incorrect temperature 511, ignore

It shuts the miner down. I am running 7 Sapphire rx 480 8g cards with Windows 10, and I have not figured out what to do to get rid of it. May be the result of using a pcie splitter on the 6th slot, but I have 40 other machines just like it and none of them are doing it. Please share any experiences you have with this to give me some ideas. I have reinstalled the drivers 3 times (August 234d blockchain drivers) flashed the video cards' bios back to the original, and removed all control parameters from the miner. Looking for the "what else" I can try. Thanks.

I had the same error on one rig. Turned out it has burned my SATA cable in PSU connector. This SATA was powering two risers, thats why 2 GPUs were affected.
After I replaced SATA cable it started working again, but it got burned again after a week, so I replaced the whole PSU - now its OK for 2 months.

arnold_mad

newbie

Activity: 64

Merit: 0

problem for me is that nlpool is not stable atm - any clue when they will fix everything ?
using antminer pool atm

krasent

newbie

Activity: 18

Merit: 0

Quote from: adyspd on February 20, 2018, 06:33:02 AM

Quote from: bskc on February 20, 2018, 04:18:37 AM

Hi blake2s dual miner's,

Claymore new blake2s dual mining offers new opportunities of mining. It seems like all the community get interested to this algorithm. All pools were immediately cannibalized by this hashrate.

Blake2s coins are often hosted on little and often new pool. Pool operators are working hard to avoid disconnections, to support increasing hashrate and miners,…

Lots of work, fixes, patches, coffees, nightmares, new servers, coffees again… Unimining jumped from 1000 miners to 35000 miners in few days only on the blake2s! That’s amazing!

Thanks to all (remaining) miners mining on UniMining. Thanks for your confidence. We do our best every day to ensure the best quality of services, investigating and acting on every bottleneck! Some fixes should still be implemented.

We apologize if you get bad earnings and we are still working on it. If you have the solution or any suggestions… or stop blaming us on all post;

Have a nice day.

We can't stop blaming you, everyone needs to know the truth !
Compared to some other pools you are stealing arround 50% of the income ( if it's server issues or whatever else it's just your problem, but as long other pools can credit 100%, it's just stealing ).
You can ask for a higher fee, set pool user limit, etc, don't just let ppl think they will earn X ammount of coins based on their hashpower and you pay like 50%.
With all the mising coins in like 1 week, and with the hashpower from blake2s-unimining, you could earn like thousands of $$, please play fair.

Thanks.

Confirm!

for 24h nlpool paid much more than Unimining.

kgminer

jr. member

Activity: 100

Merit: 6

Quote from: mshordja on February 20, 2018, 06:28:09 AM

Quote from: kgminer on February 20, 2018, 05:53:54 AM

Quote from: Efemen on February 20, 2018, 03:07:11 AM

Quote from: kgminer on February 20, 2018, 02:59:46 AM

Anyone successfully mining SHIELD (blake2s algo) coin?
I tried a few times but unable to set it up? not sure if the it claymore exe or something else is going on.

Did you mine other Blake2S successfully? If not, then the setting is not right.

yes xvg on nlpool and antminepool.com works perfectly fine. It can't find anything wrong with the settings.

most of the time the miner can't connect to the pool, especial with nlpool

Doesn't matter which pool i try, i get this.

Example

B2S: Stratum - connecting to 'pool.bilbotel.fr' <54.36.252.117> port 5766
  B2S: Stratum - Connected (pool.bilbotel.fr:5766)
  B2S: Authorization failed : (null)
Socket was closed remotely (by pool)
  B2S: Job timeout, disconnect, retry in 20 sec...

silvi0

newbie

Activity: 4

Merit: 0

Quote from: RAKOT on February 20, 2018, 06:29:13 AM

Hello Everyone!

Could somebody help me to solve my isssu ?

Ive got an headache trying to figure out this problem. In some time one of GPUs show 0 hashrate. CM trying to restart itself and no good.

It repeats the same message over and over until i restart whole rig.
https://imgur.com/a/j99nK

GPUs are with modded bios.

10:09:05:728   174c   WATCHDOG: GPU 2 hangs in OpenCL call, exit
10:09:05:743   174c   WATCHDOG: GPU 2 hangs in OpenCL call, exit

10:09:16:800   174c   Restarting OK, exit...

Help please....
[/quote]

GPU 2 hangs.. Detach that GPU and try if the problems are solved, after that reinstall that GPU (Modding and driver)

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 387. (Read 6590565 times)