Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 473.

Claymore

donator

Activity: 1610

Merit: 1325

Miners developer

v10.5:

- applied another workaround for ADL, you must not see "Temperature control thread hangs" message now.
- added version for CUDA 9.1.
- now miner shows a warning if you enabled full remote management (-mport > 0) and did not specify -mpsw parameter.
- now miner shows a warning if you specified default ETH wallet (from default start.bat).

BulldogPO

newbie

Activity: 20

Merit: 0

Quote from: ?? on ??

Quote from: BulldogPO on January 16, 2018, 05:48:22 AM

I tried to mod bios but now Windows does BSOD when installing blockchain drivers.

Try installing the latest 17.12.2 Adrenalin drivers. After it installed you can set the Compute mode in the settings.

Radeon settings -> Gaming -> Global settings -> Per GPU - Compute mode

Also how did you mod? Did you download the BIOS from your card and edit that? Could be that the changes are too high for your card and when it initialises it crashes.

I restored original ASUS bios to my RX 570 4GB cards, removed drivers totally with DDU, rebooted, installed Adrenalin 17.12.2 drivers, rebooted, switched to compute mode, updated Claymore to v10.4 and now I got 16MH/s Ethereum speed per card Sad

What next?

wtfonly16

full member

Activity: 285

Merit: 105

this exploit has already been discovered long ago

https://github.com/nicehash/NiceHashMinerLegacy/issues/96

frequencydip

newbie

Activity: 9

Merit: 0

Major exploit found in Claymore miner! The exploit is based on Satori the nasty exploit that took out IOT devices in 2016, its exploiting port 3333 so block that port and check your rigs ASAP.

Full article
https://arstechnica.com/information-technology/2018/01/in-the-wild-malware-preys-on-computers-dedicated-to-mining-cryptocurrency/

ljbawss

newbie

Activity: 12

Merit: 0

Quote from: MagicSmoker on January 17, 2018, 04:36:56 PM

Quote from: ljbawss on January 17, 2018, 04:18:33 PM

I have 6 RX 580's, modded them all seperately one by one to 30.2 Mh/s on ETH only mode. When I plug all 6 cards in and run the ETH only mode I get 5 cards running 20 Mh/s and the last one 30 Mh/s. Anyone knows why? When running other algo's they run all 6 with the same speed

Does the problem persist if you use a different miner, such as Ethminer 0.12.0?

Tried Ethminer but the text appears really slow, can't use it

Quote from: wtfonly16 on January 17, 2018, 04:54:15 PM

Quote from: ljbawss on January 17, 2018, 04:18:33 PM

I have 6 RX 580's, modded them all seperately one by one to 30.2 Mh/s on ETH only mode. When I plug all 6 cards in and run the ETH only mode I get 5 cards running 20 Mh/s and the last one 30 Mh/s. Anyone knows why? When running other algo's they run all 6 with the same speed

set the other 5 to compute mode

Thanks alot! They were indeed set back to Graphic (I changed them to compute in the past but didn't think about it now). All cards run at equal speeds now. The bot does crash after some minutes though, guess I have to play with afterburner again.

wtfonly16

full member

Activity: 285

Merit: 105

Quote from: ljbawss on January 17, 2018, 04:18:33 PM

I have 6 RX 580's, modded them all seperately one by one to 30.2 Mh/s on ETH only mode. When I plug all 6 cards in and run the ETH only mode I get 5 cards running 20 Mh/s and the last one 30 Mh/s. Anyone knows why? When running other algo's they run all 6 with the same speed

set the other 5 to compute mode

MagicSmoker

full member

Activity: 420

Merit: 184

Quote from: ljbawss on January 17, 2018, 04:18:33 PM

I have 6 RX 580's, modded them all seperately one by one to 30.2 Mh/s on ETH only mode. When I plug all 6 cards in and run the ETH only mode I get 5 cards running 20 Mh/s and the last one 30 Mh/s. Anyone knows why? When running other algo's they run all 6 with the same speed

Does the problem persist if you use a different miner, such as Ethminer 0.12.0?

ljbawss

newbie

Activity: 12

Merit: 0

I have 6 RX 580's, modded them all seperately one by one to 30.2 Mh/s on ETH only mode. When I plug all 6 cards in and run the ETH only mode I get 5 cards running 20 Mh/s and the last one 30 Mh/s. Anyone knows why? When running other algo's they run all 6 with the same speed

wtfonly16

full member

Activity: 285

Merit: 105

Quote from: luis31 on January 17, 2018, 01:25:19 PM

Hallo to the community...

i have a fucking problem with my new rig...

13x GPU: 8x AMD 5 NVIDIA

if i start the clymore bat file i get the dos screen

they list me 8 AMD GPU and after

this:

gpu #0 agorithm asm
gpu #1 agorithm asm
gpu #2 agorithm asm
gpu #3 agorithm asm
gpu #4 agorithm asm
gpu #5 agorithm asm
gpu #6 agorithm asm

after this message windows freeze complete i can only reset the system.

if i change the grafikcards to 9 nvidia and 4 amd cards it works?

why? my mobo is ASUS Expert B250..

anybody know the solution for my problem?
thank you...

ur first problem is assuming everything is going to work fine and dandy mixing amd and nvidia.... just get 13 amd or build 8 card nvidia rigs

joboy84

member

Activity: 122

Merit: 10

Hello,

Having a question about the failover option.

As I always saw untill now, the failover was looking into the epool.txt file.

Quote

#POOL: eth-us-east1.nanopool.org:9999, WALLET: 0x66D77160bF8115a50c8A4d2a90a3009d5Dcf97DD, PSW: x
POOL: us2.ethermine.org:4444, WALLET: 0x66D77160bF8115a50c8A4d2a90a3009d5Dcf97DD, PSW: x

But I saw on a pool configuration file :

Quote

ethdcrminer64 -epool us1.ethermine.org:4444 us2.ethermine.org:4444 -ewal 0x66D77160bF8115a50c8A4d2a90a3009d5Dcf97DD -epsw x

So, if I put the 2 pool adresses one behind the other, the second one will be used as failover ?

That would be great because on ethmonitoring.com service, we cannot put a failover in a file.

thx

AlainC

member

Activity: 91

Merit: 10

Maybe a good news on the horizon for Linux

Phoronix: GPU Voltage Control Support Coming To AMDGPU Driver

https://www.phoronix.com/forums/forum/phoronix/latest-phoronix-articles/1001523-gpu-voltage-control-support-coming-to-amdgpu-driver

Matias

full member

Activity: 182

Merit: 101

Well.. very soon GPU mining of Blake2b is gone

https://bitcointalksearch.org/topic/bitmain-is-releasing-a-815ghs-blake2b-miner-called-the-antminer-a3-2770075

Matias

full member

Activity: 182

Merit: 101

Quote from: BennyT on January 17, 2018, 01:50:07 PM

Quote from: Matias on January 17, 2018, 01:40:55 PM

Is it really so, that mining two coins doesn’t decrease Ethereum hashrate? What is the best coin to mine with Ethereum?

Yes it does lower the ethereum hash rate. Most people think the decrease is not significant. Check what to mine for profitability on the second coin, knowing this always changes. I like Decred

But the profits from the second coin outweighs the 2% devfee (instead of 1%) and the decrease in the ethereum hashrate?

BennyT

full member

Activity: 259

Merit: 108

Quote from: Matias on January 17, 2018, 01:40:55 PM

Is it really so, that mining two coins doesn’t decrease Ethereum hashrate? What is the best coin to mine with Ethereum?

Yes it does lower the ethereum hash rate. Most people think the decrease is not significant. Check what to mine for profitability on the second coin, knowing this always changes. I like Decred

Matias

full member

Activity: 182

Merit: 101

Is it really so, that mining two coins doesn’t decrease Ethereum hashrate? What is the best coin to mine with Ethereum?

luis31

newbie

Activity: 10

Merit: 0

Hallo to the community...

i have a fucking problem with my new rig...

13x GPU: 8x AMD 5 NVIDIA

if i start the clymore bat file i get the dos screen

they list me 8 AMD GPU and after

this:

gpu #0 agorithm asm
gpu #1 agorithm asm
gpu #2 agorithm asm
gpu #3 agorithm asm
gpu #4 agorithm asm
gpu #5 agorithm asm
gpu #6 agorithm asm

after this message windows freeze complete i can only reset the system.

if i change the grafikcards to 9 nvidia and 4 amd cards it works?

why? my mobo is ASUS Expert B250..

anybody know the solution for my problem?
thank you...

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: zz0622 on January 17, 2018, 10:07:42 AM

Hi~Guys,

I'm using Claymore DualMiner 10.3 Now, and one of my rig keep showing message as below:

PASC: 01/17/18-22:48:21 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:21 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:21 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:21 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:22 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:22 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:22 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:22 - New job from pasc-us-west1.nanopool.org:15555

And the Hashrate of ETH on Nanopool is 0 because it just keep trying to get job on PASC.

The log is in file below, it seems the log file is strange on getting PASCAL jobs:

https://www.dropbox.com/s/imgajx2ppgxsuba/PASCAL_Error_log.txt?dl=0

Does anyone ever encounter this problem?

Thank you guys.

this is the server:port that you are trying to connect to to mine pascal as a second coin, but it should not interfere with another server:port that you should provide for ETH mining

zz0622

newbie

Activity: 14

Merit: 0

Hi~Guys,

I'm using Claymore DualMiner 10.3 Now, and one of my rig keep showing message as below:

PASC: 01/17/18-22:48:21 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:21 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:21 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:21 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:22 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:22 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:22 - New job from pasc-us-west1.nanopool.org:15555
PASC: 01/17/18-22:48:22 - New job from pasc-us-west1.nanopool.org:15555

And the Hashrate of ETH on Nanopool is 0 because it just keep trying to get job on PASC.

The log is in file below, it seems the log file is strange on getting PASCAL jobs:

https://www.dropbox.com/s/imgajx2ppgxsuba/PASCAL_Error_log.txt?dl=0

Does anyone ever encounter this problem?

Thank you guys.

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: hosagot on January 17, 2018, 09:08:27 AM

What is the difference with the claymore software from nanopool github account (https://github.com/nanopool/Claymore-Dual-Miner)? Or is it the same?

You should ask/check at nanopool what version of claymore they put up on their(?) github ... and why

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: Marvell2 on January 17, 2018, 07:51:14 AM

so sick of this fucking

shit

LBC - Total Speed: 115.426 Mh/s, Total Shares: 4286, Rejected: 24
LBC: GPU0 off, GPU1 64.873 Mh/s, GPU2 50.553 Mh/s, GPU3 off, GPU4 off, GPU5 off, GPU6 off

Code:

Socket was closed remotely (by pool)
ETH: Connection lost, retry in 20 sec...

LBC: 01/17/18-04:36:08 - New job from lbry.suprnova.cc:6256
ETH: Stratum - connecting to 'eu1.ethpool.org' <91

happens every day and kills the miner or then i get cards that start hashing less or the machine dies entirely

claymore needs to fix this shit. Its not even the pool since it happens on multiple pools

never seen GPU go off on itself... although last time I mined libry... was never:)

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 473. (Read 6590718 times)