Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 481.

muzuca

member

Activity: 182

Merit: 13

Quote from: tg88 on January 12, 2018, 05:45:54 AM

Quote from: jeet1337 on January 11, 2018, 04:32:10 PM

just a second line with siacoin? if yes what is best pool here/wallet to use?

I recommend using siamining.com, it is easier and stable.

Here are the parameters you need to use:
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal YourEthAddress.YourWorkerName -epsw x -dpool stratum+tcp://us-east.siamining.com:7777 -dwal YourSiacoinAddress.YourWorkerName -dcoin sia

Hello.

What dcri config do you use to get the best performance of ETH and SIA mining? I tested -dcri 15 and was good. Do you have any suggestion?

msvend

newbie

Activity: 5

Merit: 0

Quote from: Swiped on January 12, 2018, 09:25:35 AM

Has anyone noticed the payout on Dwarfpool have dropped dramatically over the past week? Seems like the drop in productivity is higher than the rate of difficulty increase. I recently switched from the European server to the US server and I am trying to figure out if that had anything to do with it. Thoughts?

I've noticed this as well, it's been getting worse and worse each day.

Swiped

member

Activity: 100

Merit: 10

Has anyone noticed the payout on Dwarfpool have dropped dramatically over the past week? Seems like the drop in productivity is higher than the rate of difficulty increase. I recently switched from the European server to the US server and I am trying to figure out if that had anything to do with it. Thoughts?

NewbieMiner17

newbie

Activity: 46

Merit: 0

Quote from: ?? on ??

im current mining on ethermine pool..the miner runs fine for few hours and gets disconnected for few seconds and then reconnects to nanopool and gpu keeps running...i dont know whts the problem...can anybody help...

What pools do you have set on Pools.txt file? Set it at Ethermine for 1st back up pool and see if that helps.

tg88

legendary

Activity: 2492

Merit: 1429

Payment Gateway Allows Recurring Payments

Quote from: jeet1337 on January 11, 2018, 04:32:10 PM

just a second line with siacoin? if yes what is best pool here/wallet to use?

I recommend using siamining.com, it is easier and stable.

Here are the parameters you need to use:
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal YourEthAddress.YourWorkerName -epsw x -dpool stratum+tcp://us-east.siamining.com:7777 -dwal YourSiacoinAddress.YourWorkerName -dcoin sia

muzuca

member

Activity: 182

Merit: 13

Quote from: NewbieMiner17 on January 12, 2018, 04:26:51 AM

Hey guys,

So seems like one of my RX480s Nitro+ has packed up. The lights at the top light up ok but fans don't come on even during start up when all fans should. I've tried moving it around to different risers but still end up with same result of not starting up. I've moved the switch to powersave to see if it was anything related to the BIOS but no luck. I've checked all around the connectors (without opening up the card) and everything seems ok.

Anyone have any idea of what else I could do to check it? As it's not being recognised by PC I can't even run further tests.

Cheers,

I think you tried every step that I know... sometime ago I lost a GPU with the same symptons... for some reason stop to work and I have to buy a new one. In my case I was putting a lot of power (cclock and mcclock), stressing the gpu.

AlainC

member

Activity: 91

Merit: 10

Quote from: d3xyna on January 12, 2018, 04:52:23 AM

@claymore > can i sugest to add variables that we can setup in the cofig file , like $RigName, so that when we change the mining pool for example and upload the config (for multiple rigs i mean) only would need to change one line of code (or copy/pase the new pool and be done)

I think it does already work with %NAMEOFVAR% (even on linux, this is DOs syntax)

for example in y epools.txt I have:
POOL: eth-eu2.nanopool.org:9999, WALLET: %ETHWALLETADDRESS%/%MINERNODE%/%MAIL%, PSW: x, WORKER: , ESM: 0, ALLPOOLS: 0
...

d3xyna

newbie

Activity: 8

Merit: 0

@claymore > can i sugest to add variables that we can setup in the cofig file , like $RigName, so that when we change the mining pool for example and upload the config (for multiple rigs i mean) only would need to change one line of code (or copy/pase the new pool and be done)
i'll give an example here, should be something like simeplemining is using with $workerName in the mining config
And its could be in a separate file or defined in the config file

Code:

$RigName=rig1

and in the mining.bat file

Code:

EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F.$RigName -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal Redhex.my -dpsw x

Thanks and hope to see this feature soon!

NewbieMiner17

newbie

Activity: 46

Merit: 0

Hey guys,

So seems like one of my RX480s Nitro+ has packed up. The lights at the top light up ok but fans don't come on even during start up when all fans should. I've tried moving it around to different risers but still end up with same result of not starting up. I've moved the switch to powersave to see if it was anything related to the BIOS but no luck. I've checked all around the connectors (without opening up the card) and everything seems ok.

Anyone have any idea of what else I could do to check it? As it's not being recognised by PC I can't even run further tests.

Cheers,

DeepTerrfici

full member

Activity: 275

Merit: 100

Data Collecting Textile Circuitry

what are you guys finding to be your best dcri/afterburner settings for eth+sia with gtx1060s?

Bael

jr. member

Activity: 87

Merit: 2

Quote from: M.mohebbi on January 11, 2018, 08:05:21 PM

Hi guys.

First sorry for my bad english.
Why claymore show total share half of share submitted in nanopool?
3 or 4 day ago in 29 hour claymore accepted 4500 share.
But today in 11 hour claymore accepted only 1100 share but in nanopool still show 180-200 share per hour.

And my second problem is:
Cards number 7 and 8 in gpu-z in sensor tab (memory controller load) show load 100 and 0 every fiver second.

I tried default memcolock and cclock and voltage but nothing change.

Prueba a desactivar la numero 8, quiza tu cap de gpus esta en 7, si con las siete todas funcionan estable probablemente sea eso, ya nos cuentas : )

wml2018

newbie

Activity: 4

Merit: 0

Quote from: msvend on January 11, 2018, 05:40:21 PM

Quote from: wml2018 on January 11, 2018, 05:18:19 PM

Quote from: msvend on January 11, 2018, 02:53:45 PM

Quote from: wml2018 on January 11, 2018, 02:43:42 PM

Quote from: msvend on January 11, 2018, 02:33:43 PM

Quote from: wml2018 on January 11, 2018, 01:55:46 PM

Quote from: ?? on ??

Quote from: btwice on January 10, 2018, 06:17:29 PM

Quote from: muzuca on January 10, 2018, 06:08:01 PM

Quote from: btwice on January 10, 2018, 06:02:15 PM

I've noticed my hash rates recently dropped (AMD rx 580s usually at 27-28MH/s each, now down to 19MH/s each) for unknown reasons, but when I run benchmark mode the rates are back to what I was used to seeing. Is there something benchmark mode is doing that doesn't limit the cards, or is this simply just real world vs benchmark?

Do you updated you gpu drivers? Because in the lastest version you need to enable the compute config in Global Settings > GPU Workload of AMD Radeon Settings.

If you are using Blockchain drivers Aug 23, this step it's not necessary, so you have another issue.

http://karlcode.owtelse.com/blog/2017/03/13/reverting-to-a-previous-kernel/
I had followed directions from here.

I'm dumb forgot to set a few things in the command line Embarrassed

hello.i m having this same issue as yours..may i know what to change to bring it back to normal..thnks..

I have the same problem. After I restart, three mining rigs drop hashrate from ~30 to ~20. Looking forward to your reply !!! Thanks.

I've been running into this as well. I've even reinstalled amd-gpu-pro blockchain and am getting the same results.

Benchmark runs gave me ~30 as normal so should not be any problems related to my local PCs. I did not do any updates, just restarting my rigs and this happens. I think this is somethings related to Claymore setups or mining server ... I am using Claymore 10.2 mining ETH and PASC with Ubuntu + Nanopool.

Some further reading I have been doing shows that it may have to do with the latest security patch to Ubuntu.
*update* I can confirm that booting up into a previous Kernel does seem to revert back to proper MH/s

Would you please tell me how to do it? I google and follow this instruction but it did not work. Thanks.
https://askubuntu.com/questions/82140/how-can-i-boot-with-an-older-kernel-version

http://karlcode.owtelse.com/blog/2017/03/13/reverting-to-a-previous-kernel/
I had followed directions from here.

Work perfect for me. So, the problem is I accidently updated to 4.13 and after be back to 4.10, everything is back to normal. This is another helful instruction https://askubuntu.com/questions/764241/how-to-remove-new-kernel-and-make-older-default-16-04
Thanks,

M.mohebbi

newbie

Activity: 1

Merit: 0

Hi guys.

First sorry for my bad english.
Why claymore show total share half of share submitted in nanopool?
3 or 4 day ago in 29 hour claymore accepted 4500 share.
But today in 11 hour claymore accepted only 1100 share but in nanopool still show 180-200 share per hour.

And my second problem is:
Cards number 7 and 8 in gpu-z in sensor tab (memory controller load) show load 100 and 0 every fiver second.

I tried default memcolock and cclock and voltage but nothing change.

https://image.ibb.co/jSQfgm/IMG_20180112_043056_542.jpg

muzuca

member

Activity: 182

Merit: 13

Quote from: saucedaddy on January 11, 2018, 12:32:48 AM

Anyone know what combination of dual mining is most profitable i.e. ETH+DCR, ETH+SIA?

I'm mining ETH+DCR and just know I noticed some difficulty to mine DCR... is taking longer to mine 1 DCR... but still worthing.

muzuca

member

Activity: 182

Merit: 13

msvend

newbie

Activity: 5

Merit: 0

Quote from: wml2018 on January 11, 2018, 05:18:19 PM

Quote from: msvend on January 11, 2018, 02:53:45 PM

Quote from: wml2018 on January 11, 2018, 02:43:42 PM

Quote from: msvend on January 11, 2018, 02:33:43 PM

Quote from: wml2018 on January 11, 2018, 01:55:46 PM

Quote from: ?? on ??

Quote from: btwice on January 10, 2018, 06:17:29 PM

Quote from: muzuca on January 10, 2018, 06:08:01 PM

Quote from: btwice on January 10, 2018, 06:02:15 PM

I've noticed my hash rates recently dropped (AMD rx 580s usually at 27-28MH/s each, now down to 19MH/s each) for unknown reasons, but when I run benchmark mode the rates are back to what I was used to seeing. Is there something benchmark mode is doing that doesn't limit the cards, or is this simply just real world vs benchmark?

Do you updated you gpu drivers? Because in the lastest version you need to enable the compute config in Global Settings > GPU Workload of AMD Radeon Settings.

If you are using Blockchain drivers Aug 23, this step it's not necessary, so you have another issue.

http://karlcode.owtelse.com/blog/2017/03/13/reverting-to-a-previous-kernel/
I had followed directions from here.

I'm dumb forgot to set a few things in the command line Embarrassed

hello.i m having this same issue as yours..may i know what to change to bring it back to normal..thnks..

I have the same problem. After I restart, three mining rigs drop hashrate from ~30 to ~20. Looking forward to your reply !!! Thanks.

I've been running into this as well. I've even reinstalled amd-gpu-pro blockchain and am getting the same results.

Benchmark runs gave me ~30 as normal so should not be any problems related to my local PCs. I did not do any updates, just restarting my rigs and this happens. I think this is somethings related to Claymore setups or mining server ... I am using Claymore 10.2 mining ETH and PASC with Ubuntu + Nanopool.

Some further reading I have been doing shows that it may have to do with the latest security patch to Ubuntu.
*update* I can confirm that booting up into a previous Kernel does seem to revert back to proper MH/s

Would you please tell me how to do it? I google and follow this instruction but it did not work. Thanks.
https://askubuntu.com/questions/82140/how-can-i-boot-with-an-older-kernel-version

http://karlcode.owtelse.com/blog/2017/03/13/reverting-to-a-previous-kernel/
I had followed directions from here.

wml2018

newbie

Activity: 4

Merit: 0

Quote from: msvend on January 11, 2018, 02:53:45 PM

Quote from: wml2018 on January 11, 2018, 02:43:42 PM

Quote from: msvend on January 11, 2018, 02:33:43 PM

Quote from: wml2018 on January 11, 2018, 01:55:46 PM

Quote from: ?? on ??

Quote from: btwice on January 10, 2018, 06:17:29 PM

Quote from: muzuca on January 10, 2018, 06:08:01 PM

Quote from: btwice on January 10, 2018, 06:02:15 PM

I've noticed my hash rates recently dropped (AMD rx 580s usually at 27-28MH/s each, now down to 19MH/s each) for unknown reasons, but when I run benchmark mode the rates are back to what I was used to seeing. Is there something benchmark mode is doing that doesn't limit the cards, or is this simply just real world vs benchmark?

Do you updated you gpu drivers? Because in the lastest version you need to enable the compute config in Global Settings > GPU Workload of AMD Radeon Settings.

If you are using Blockchain drivers Aug 23, this step it's not necessary, so you have another issue.

I'm dumb forgot to set a few things in the command line Embarrassed

hello.i m having this same issue as yours..may i know what to change to bring it back to normal..thnks..

I have the same problem. After I restart, three mining rigs drop hashrate from ~30 to ~20. Looking forward to your reply !!! Thanks.

I've been running into this as well. I've even reinstalled amd-gpu-pro blockchain and am getting the same results.

Benchmark runs gave me ~30 as normal so should not be any problems related to my local PCs. I did not do any updates, just restarting my rigs and this happens. I think this is somethings related to Claymore setups or mining server ... I am using Claymore 10.2 mining ETH and PASC with Ubuntu + Nanopool.

Some further reading I have been doing shows that it may have to do with the latest security patch to Ubuntu.
*update* I can confirm that booting up into a previous Kernel does seem to revert back to proper MH/s

Would you please tell me how to do it? I google and follow this instruction but it did not work. Thanks.
https://askubuntu.com/questions/82140/how-can-i-boot-with-an-older-kernel-version

jeet1337

newbie

Activity: 1

Merit: 0

Anynone can help me maybe?

i'm new at all to mining, ave setup eth mining, with my wallet( edit start.bat)
now i'm want siacoin mining as well
what have to do for setup siacoin now?

my start.bat have now
EthDcrMiner64.exe -epool my pool -ewal my ETH wallet -epsw x -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal Redhex.my -dpsw x

just a second line with siacoin? if yes what is best pool here/wallet to use?

would be great if you can help me