Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 523. (Read 6590718 times)

Thanks
EDIT
Found in nanopool site

However in nanoool site the  example is:

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal YOUR_ETH_ADDRESS/YOUR_WORKER_NAME/YOUR_EMAIL -mode 1

You are missing "-epsw x"
Nanopool has a config generator for the Claymore miner, just click on "Quick Start" and it will create one for you. This is what I get and it works, just put in your details into the grenerator.

Always for Europe, Claymoure 10.0
Is it right this line? Or too simple?

Did you define manually the Ethereum and Siacoin mining intensity?
GTX1060 can withstand -dcri (Siacoin) up to 40-50 without significant drop in hashrate, while RX470 start to hash ETH slower beginning with -dcri 20-25. Maybe your miner has set automatically a 40-45 intensity, that keeps down ETH hashrate on RX470.
I suggest you to run 2 Claymore instances: one for GTX1060, another for RX470 and adjust Siacoin intensity. Define -di (GPU index) for each instance.

Vulnerability discovered in Claymore miner versions earlier than 10.2, opening Claymore up to a remote attack hack. I don't know if this has been confirmed or not but there is a notice of it here (see post #4605) https://bitcointalk.org/index.php?topic=472510.4600

Update:

Just did a test mine on Dwarfpool with the setting given below [using Claymore 9.8] and it works OK. I used the example given in the readme file.

I got 511 today, v9.8.
My problem is my new PSU, 1250w PSU only support 3gpu stable. 6gpu got 511message in 5min. I changed PSU,problem sloved.  Hope that helpful.

This is the setting I used for Dwarfpool. I have not used Dwarfpool for sometime now but I'm sure nothing has changed in that time (still keep all my old settings just in case I decide to use it again).


EDIT: Oops! This is my Cryptonote settings for Claymore 9.7 (something else screwed up there - it's too early) my bad

Can someone help me with the command line for dwarfpool.

I am mining only eth and I'm located in EU.

Should i write this: EthDcrMiner64.exe -epool eth-eu.dwarfpool.com:8008 -ewal (my ETH wallet) -epsw x -allcoins -1

Is this correct?

Which pool you using for decreed?

what does this tell you? - test different PCI-E slot, test different GPU in the same slot, check BIOS settings for that slot...

Hello,

   I have Ubuntu 16.04 installed on ASRock  H110 Pro BTC+ with 10 RX 580 +1 RX570 connected and I'm using Claymore Dual Mining ETH+DCR.On system i see 11 GPU connected but we I start ethdcrminer64 only 10 GPU are mining.

lspci | grep AMD
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev ef)
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7)
02:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
03:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7)
03:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7)
04:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
05:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7)
05:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
09:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7)
09:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
0b:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7)
0b:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
0c:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7)
0c:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
0d:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7)
0d:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
0e:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7)
0e:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0
0f:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Device 67df (rev e7)
0f:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device aaf0

ETH: 1 pool is specified
Main Ethereum pool is eth-eu1.nanopool.org:9999
DCR: 1 pool is specified
Main Decred pool is dcr.suprnova.cc:3252
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
OpenCL initializing...

AMD Cards available: 10
GPU #0: Ellesmere, 4082 MB available, 32 compute units
GPU #0 recognized as Radeon RX 470/570
GPU #1: Ellesmere, 8178 MB available, 36 compute units
GPU #1 recognized as Radeon RX 480/580
GPU #2: Ellesmere, 8178 MB available, 36 compute units
GPU #2 recognized as Radeon RX 480/580
GPU #3: Ellesmere, 8178 MB available, 36 compute units
GPU #3 recognized as Radeon RX 480/580
GPU #4: Ellesmere, 8178 MB available, 36 compute units
GPU #4 recognized as Radeon RX 480/580
GPU #5: Ellesmere, 8178 MB available, 36 compute units
GPU #5 recognized as Radeon RX 480/580
GPU #6: Ellesmere, 8178 MB available, 36 compute units
GPU #6 recognized as Radeon RX 480/580
GPU #7: Ellesmere, 8178 MB available, 36 compute units
GPU #7 recognized as Radeon RX 480/580
GPU #8: Ellesmere, 8178 MB available, 36 compute units
GPU #8 recognized as Radeon RX 480/580
GPU #9: Ellesmere, 8178 MB available, 36 compute units
GPU #9 recognized as Radeon RX 480/580
POOL/SOLO version



 How i can enable 11 GPU to mine with claymore?



Thanks.

Thanks for clearing that up.
Now that rig has been upgraded to Win 1709, ADM 17.1.4.
If this will appear again I will PM you with complete logs.

When I moved the GPU to different PC it doesn't show that issue anymore. I have rolled back to v9.8. And this GPU has been mining stable for almost 2 years now. I have tried different risers (almost 20 different risers).

What -dcri number do you use when dual mining Decred?

So in fact is there a chance that central and local monitoring system could mess up mining process ?
On local monitoring there's two triggers: first restarts the miner in 5 minutes if hashrate is below x and second restarts the pc in 10 minutes if hashrate is still below x

I switched from 10.0 directly to 10.2 and now I see both API calls in log file


plus some of the rigs have gone offline at the same time, I'm pretty sure it's the monitoring issue (?)

Hi everyone - first time posting to the forum but been reading the threads for quite a number of months.  I'm hoping someone can help me out.

I have a 7 GPU rig made up of (5) GTX 1060's and (2) RX470's.  My RX470's are giving me very low hashrates.  They fluctuate between 12 mh/s and 18 mh/s.  Here is my configuration.  Any thoughts?


AMD RX470 Strix Gaming 4GB - Hynix Chips

Windows 10 1709 all updates applied
swap file 20GB
Dual Miner 10.2 ETH+SIA
AMD 17.11.4 drivers +DAG Patch (Previously had blockchain, no change in speed)
Compute mode on
MSI Afterburner V4.4

Any thoughts on what I can change to get more consistent and higher rates? 

Note: My 1060 are consistent at 23 mh/s

can someone explain this?
I have monitoring on each rig and the monitoring of all of my rigs on one dedicated pc
I never noticed this before
this actual PCs IP is different

Check OP or History.txt:


So v10.1 could not restart due to ADL API problems, watchdog did not check it. Moreover, both watchdog and temperature control works in same thread in v10.1 so if ADL hangs, watchdog hangs too and fails to restart miner even if some GPU fails after it. It was fixed in v10.2, now temperature control works in separate thread.
If you think that watchdog works incorrectly, you can PM me the log file and I will check it.

Hi

I'm having the same problem with 10.2, with version 10.1 it does not happen to me.

I am currently using the 10.1 and all stable for 75 hours