Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 571.

sadyas

member

Activity: 74

Merit: 10

Quote from: fredeq on October 12, 2017, 02:37:48 PM

Quote from: micax1 on October 12, 2017, 06:23:01 AM

Whoever is still using r9 280x... I need your advice badly!
I have weird 13-26 mh/s ETH 29-58 mh/s LBC fluctuation.
Does not depend on overcloack, power limit, page file > 32gb different PSUs voltage, temperature or whatever, tried all the shit possible!

Nicehash users buying your hashes will sometimes mine a coin with smaller dag (like UBQ) and on that coin 280x will give you its full speed.

So if you mine the UBQ directly, it is good for 280X.

fredeq

legendary

Activity: 1537

Merit: 1005

Quote from: micax1 on October 12, 2017, 06:23:01 AM

Whoever is still using r9 280x... I need your advice badly!
I have weird 13-26 mh/s ETH 29-58 mh/s LBC fluctuation.
Does not depend on overcloack, power limit, page file > 32gb different PSUs voltage, temperature or whatever, tried all the shit possible!

Nicehash users buying your hashes will sometimes mine a coin with smaller dag (like UBQ) and on that coin 280x will give you its full speed.

greatauror28

full member

Activity: 181

Merit: 101

Ethereum Miner

Guys, i'm building a new rig - reason is my 8-gpu Gaming X rig got sold and I got some sweet profit Grin

I'm thinking to try Sapphire cards, but would like to have 8gb ones, if I could get a decent price. Here are my options:

8gb Nitro+ 570 - $350CAD
8gb Nitro+ 580 Ltd - $438CAD
8gb Nitro+ 580 SEL - $380CAD
4gb Nitro+ 580 Ltd - $363CAD

I know most would pick the SEL for $380 but it's out of stock right now. I could wait for a week or so but there's no guarantee that I could snag 8 of them.

If I ended up selling it again, then I won't mind getting the 4gb 580, but if I'm keeping them, I would like an 8GB ones for future-proofing.

What do you guys think? I'm wishing to get my rig built and up and running before Byz arrives on the 25th.

blackhwk77

newbie

Activity: 27

Merit: 0

I'm seeing a similar problem on my 5 GPU rig, I get the below messages in the claymore log and a bunch of driver crashes in the windows log. I have dialed my GPUs way back but it still crashes and there are 0 GPU errors when I look at hwinfo.

Quote from: informatuss on October 12, 2017, 03:58:30 AM

I've got problem with windows freezing when I'm closing claymore after GPU hangs in OpenCL.
I need to do hard reset most of the time.
Same problem with 3 rigs, all windows 10, all RX580.

I had -r 1 for reboot and now I'm using -r -1 -wd 0
still same problem.

alizali

newbie

Activity: 197

Merit: 0

1. i have to explain that my GPU does not have any output. now i use to remote desktop to connect my rig
2. my GPU-z and sapphire trixx shows the temp and fan speeds
3. as i told i had them in claymore but suddenly disappeared

Vann

hero member

Activity: 1036

Merit: 606

You need to use a monitor or dummy plug in the primary VGA for the AMD driver to be able to read and set the fan speed and temperature.

alizali

newbie

Activity: 197

Merit: 0

hi guys
till yesterday my GPU temp and fan speeds are shown in claymore as usual
from today even after restart claymore and restart windows and even add -tt 1 to may bat start file these information is not printed anymore
why?
can anybody help?

ingyenfrag

newbie

Activity: 84

Merit: 0

Quote from: asdpof on October 12, 2017, 09:01:56 AM

Quote from: coinsaburou on October 12, 2017, 05:40:49 AM

I tried the new version , speed not change.

By the release description i would guess the speed increase in the new versin is only for vega

What new version? I see the september 02 version as the latest.

ciprianpt

jr. member

Activity: 127

Merit: 8

Quote from: informatuss on October 12, 2017, 03:58:30 AM

I've got problem with windows freezing when I'm closing claymore after GPU hangs in OpenCL.
I need to do hard reset most of the time.
Same problem with 3 rigs, all windows 10, all RX580.

I had -r 1 for reboot and now I'm using -r -1 -wd 0
still same problem.

Have you also created the reboot.bat file ?

asdpof

newbie

Activity: 33

Merit: 0

Quote from: coinsaburou on October 12, 2017, 05:40:49 AM

I tried the new version , speed not change.

By the release description i would guess the speed increase in the new versin is only for vega

micax1

hero member

Activity: 708

Merit: 502

Whoever is still using r9 280x... I need your advice badly!
I have weird 13-26 mh/s ETH 29-58 mh/s LBC fluctuation.
Does not depend on overcloack, power limit, page file > 32gb different PSUs voltage, temperature or whatever, tried all the shit possible!

It`s like >2 times difference! And usually it is ~13...

Please give me some advice on that behavior(GPU2 & GPU3):

Code:

ETH: 10/12/17-07:25:41 - New job from daggerhashimoto.eu.nicehash.com:3353
ETH - Total Speed: 176.130 Mh/s, Total Shares: 7, Rejected: 1, Time: 00:02
ETH: GPU0 29.026 Mh/s, GPU1 29.718 Mh/s, GPU2 13.242 Mh/s, GPU3 13.198 Mh/s, GPU4 30.733 Mh/s, GPU5 30.656 Mh/s, GPU6 29.557 Mh/s
 LBC - Total Speed: 489.846 Mh/s, Total Shares: 44, Rejected: 0
 LBC: GPU0 83.449 Mh/s, GPU1 85.440 Mh/s, GPU2 29.793 Mh/s, GPU3 29.694 Mh/s, GPU4 88.358 Mh/s, GPU5 88.136 Mh/s, GPU6 84.976 Mh/s
ETH: 10/12/17-07:25:42 - SHARE FOUND - (GPU 5)
ETH: Share accepted (93 ms)!
 LBC: 10/12/17-07:25:44 - SHARE FOUND - (GPU 4)
 LBC: Share accepted (94 ms)!
 LBC: 10/12/17-07:25:46 - SHARE FOUND - (GPU 0)
 LBC: Share accepted (203 ms)!
 LBC: 10/12/17-07:25:47 - New job from lbry.eu.nicehash.com:3356
 LBC: 10/12/17-07:25:51 - SHARE FOUND - (GPU 0)
 LBC: Share accepted (109 ms)!
ETH: 10/12/17-07:25:54 - SHARE FOUND - (GPU 6)
ETH: Share accepted (94 ms)!
 LBC: 10/12/17-07:25:59 - SHARE FOUND - (GPU 1)
 LBC: Share accepted (93 ms)!
 LBC: 10/12/17-07:26:07 - SHARE FOUND - (GPU 5)
 LBC: Share accepted (124 ms)!
GPU0 t=91C fan=82%, GPU1 t=84C fan=82%, GPU2 t=68C fan=35%, GPU3 t=78C fan=45%, GPU4 t=84C fan=82%, GPU5 t=79C fan=83%, GPU6 t=87C fan=81%
 LBC: 10/12/17-07:26:12 - SHARE FOUND - (GPU 4)
 LBC: Share accepted (140 ms)!
ETH: 10/12/17-07:26:14 - New job from daggerhashimoto.eu.nicehash.com:3353
ETH - Total Speed: 177.001 Mh/s, Total Shares: 9, Rejected: 1, Time: 00:03
ETH: GPU0 29.016 Mh/s, GPU1 30.652 Mh/s, GPU2 13.239 Mh/s, GPU3 13.203 Mh/s, GPU4 30.729 Mh/s, GPU5 30.609 Mh/s, GPU6 29.553 Mh/s
 LBC - Total Speed: 492.348 Mh/s, Total Shares: 50, Rejected: 0
 LBC: GPU0 83.420 Mh/s, GPU1 88.124 Mh/s, GPU2 29.786 Mh/s, GPU3 29.707 Mh/s, GPU4 88.346 Mh/s, GPU5 88.001 Mh/s, GPU6 84.964 Mh/s
ETH: 10/12/17-07:26:25 - New job from daggerhashimoto.eu.nicehash.com:3353
ETH - Total Speed: 176.912 Mh/s, Total Shares: 9, Rejected: 1, Time: 00:03
ETH: GPU0 29.006 Mh/s, GPU1 30.617 Mh/s, GPU2 13.243 Mh/s, GPU3 13.202 Mh/s, GPU4 30.690 Mh/s, GPU5 30.641 Mh/s, GPU6 29.515 Mh/s
 LBC - Total Speed: 492.093 Mh/s, Total Shares: 50, Rejected: 0
 LBC: GPU0 83.392 Mh/s, GPU1 88.023 Mh/s, GPU2 29.795 Mh/s, GPU3 29.704 Mh/s, GPU4 88.233 Mh/s, GPU5 88.092 Mh/s, GPU6 84.854 Mh/s
Setting DAG epoch #20...
Setting DAG epoch #20 for GPU1
Setting DAG epoch #20 for GPU6
Setting DAG epoch #20 for GPU0
Setting DAG epoch #20 for GPU5
Setting DAG epoch #20 for GPU4
Setting DAG epoch #20 for GPU2
Setting DAG epoch #20 for GPU3
GPU4 DAG creation time - 3780 ms
Setting DAG epoch #20 for GPU4 done
GPU1 DAG creation time - 3815 ms
Setting DAG epoch #20 for GPU1 done
GPU5 DAG creation time - 3814 ms
Setting DAG epoch #20 for GPU5 done
GPU6 DAG creation time - 3832 ms
Setting DAG epoch #20 for GPU6 done
GPU0 DAG creation time - 3870 ms
Setting DAG epoch #20 for GPU0 done
ETH: 10/12/17-07:26:30 - New job from daggerhashimoto.eu.nicehash.com:3353
ETH - Total Speed: 172.065 Mh/s, Total Shares: 9, Rejected: 1, Time: 00:03
ETH: GPU0 27.462 Mh/s, GPU1 29.873 Mh/s, GPU2 13.242 Mh/s, GPU3 13.192 Mh/s, GPU4 29.840 Mh/s, GPU5 29.724 Mh/s, GPU6 28.732 Mh/s
 LBC - Total Speed: 478.161 Mh/s, Total Shares: 50, Rejected: 0
 LBC: GPU0 78.954 Mh/s, GPU1 85.884 Mh/s, GPU2 29.794 Mh/s, GPU3 29.681 Mh/s, GPU4 85.790 Mh/s, GPU5 85.455 Mh/s, GPU6 82.603 Mh/s
GPU2 DAG creation time - 4985 ms
Setting DAG epoch #20 for GPU2 done
GPU3 DAG creation time - 5050 ms
Setting DAG epoch #20 for GPU3 done
 LBC: 10/12/17-07:26:34 - SHARE FOUND - (GPU 4)
 LBC: Share accepted (94 ms)!
ETH: 10/12/17-07:26:37 - SHARE FOUND - (GPU 2)
ETH: Share accepted (94 ms)!
GPU0 t=92C fan=82%, GPU1 t=84C fan=82%, GPU2 t=72C fan=39%, GPU3 t=84C fan=52%, GPU4 t=85C fan=82%, GPU5 t=79C fan=83%, GPU6 t=87C fan=81%
 LBC: 10/12/17-07:26:42 - New job from lbry.eu.nicehash.com:3356
 LBC: 10/12/17-07:26:45 - New job from lbry.eu.nicehash.com:3356
ETH: 10/12/17-07:26:46 - SHARE FOUND - (GPU 6)
ETH: Share accepted (94 ms)!
ETH: 10/12/17-07:26:49 - SHARE FOUND - (GPU 6)
ETH: Share accepted (94 ms)!

GPU #0: Hawaii, 4096 MB available, 40 compute units
GPU #1: Hawaii, 4096 MB available, 40 compute units
GPU #2: Tahiti, 3072 MB available, 32 compute units
GPU #3: Tahiti, 3072 MB available, 32 compute units
GPU #4: Hawaii, 4096 MB available, 44 compute units
GPU #5: Hawaii, 4096 MB available, 40 compute units
GPU #6: Hawaii, 4096 MB available, 40 compute units
ETH - Total Speed: 203.846 Mh/s, Total Shares: 12(0+0+3+0+0+3+6), Rejected: 1, Time: 00:03
ETH: GPU0 29.130 Mh/s, GPU1 30.926 Mh/s, GPU2 25.995 Mh/s, GPU3 25.968 Mh/s, GPU4 31.099 Mh/s, GPU5 30.890 Mh/s, GPU6 29.838 Mh/s
 LBC - Total Speed: 553.577 Mh/s, Total Shares: 51(8+10+2+0+15+8+8), Rejected: 0
 LBC: GPU0 83.748 Mh/s, GPU1 88.912 Mh/s, GPU2 58.488 Mh/s, GPU3 58.427 Mh/s, GPU4 89.410 Mh/s, GPU5 88.808 Mh/s, GPU6 85.784 Mh/s
Incorrect ETH shares: none
1 minute average ETH total speed: 189.878 Mh/s
Pool switches: ETH - 0, LBC - 0
Current ETH share target: 0x00000001fffe0000 (diff: 2147MH), epoch 20(1.16GB)
Current LBC share target: 0x00000000ffff0000 (diff: 4295MH)
GPU0 t=93C fan=82%, GPU1 t=84C fan=82%, GPU2 t=73C fan=40%, GPU3 t=86C fan=61%, GPU4 t=85C fan=82%, GPU5 t=80C fan=83%, GPU6 t=87C fan=82%












 LBC: 10/12/17-07:29:28 - New job from lbry.eu.nicehash.com:3356
 LBC: 10/12/17-07:29:40 - SHARE FOUND - (GPU 6)
 LBC: Share accepted (93 ms)!
ETH: 10/12/17-07:29:46 - New job from daggerhashimoto.eu.nicehash.com:3353
ETH - Total Speed: 199.601 Mh/s, Total Shares: 27, Rejected: 3, Time: 00:06
ETH: GPU0 26.587 Mh/s, GPU1 30.982 Mh/s, GPU2 25.978 Mh/s, GPU3 24.416 Mh/s, GPU4 30.970 Mh/s, GPU5 30.912 Mh/s, GPU6 29.756 Mh/s
 LBC - Total Speed: 542.354 Mh/s, Total Shares: 71, Rejected: 0
 LBC: GPU0 76.436 Mh/s, GPU1 89.074 Mh/s, GPU2 58.451 Mh/s, GPU3 54.936 Mh/s, GPU4 89.038 Mh/s, GPU5 88.871 Mh/s, GPU6 85.548 Mh/s
Setting DAG epoch #145...
Setting DAG epoch #145 for GPU2
Setting DAG epoch #145 for GPU6
Setting DAG epoch #145 for GPU3
Setting DAG epoch #145 for GPU1
Setting DAG epoch #145 for GPU5
Setting DAG epoch #145 for GPU4
Setting DAG epoch #145 for GPU0
GPU0 t=90C fan=83%, GPU1 t=86C fan=83%, GPU2 t=84C fan=57%, GPU3 t=87C fan=67%, GPU4 t=87C fan=83%, GPU5 t=80C fan=84%, GPU6 t=87C fan=82%
GPU4 DAG creation time - 7043 ms
Setting DAG epoch #145 for GPU4 done
GPU1 DAG creation time - 7104 ms
Setting DAG epoch #145 for GPU1 done
GPU5 DAG creation time - 7104 ms
Setting DAG epoch #145 for GPU5 done
GPU0 DAG creation time - 7146 ms
Setting DAG epoch #145 for GPU0 done
GPU6 DAG creation time - 7139 ms
Setting DAG epoch #145 for GPU6 done
ETH: 10/12/17-07:29:56 - New job from daggerhashimoto.eu.nicehash.com:3353
ETH - Total Speed: 150.259 Mh/s, Total Shares: 27, Rejected: 3, Time: 00:07
ETH: GPU0 28.973 Mh/s, GPU1 30.583 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 30.693 Mh/s, GPU5 30.542 Mh/s, GPU6 29.468 Mh/s
 LBC - Total Speed: 431.992 Mh/s, Total Shares: 71, Rejected: 0
 LBC: GPU0 83.296 Mh/s, GPU1 87.927 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 88.241 Mh/s, GPU5 87.808 Mh/s, GPU6 84.720 Mh/s
GPU2 DAG creation time - 9173 ms
Setting DAG epoch #145 for GPU2 done
GPU3 DAG creation time - 9274 ms
Setting DAG epoch #145 for GPU3 done
ETH: 10/12/17-07:30:05 - New job from daggerhashimoto.eu.nicehash.com:3353
ETH - Total Speed: 175.382 Mh/s, Total Shares: 27, Rejected: 3, Time: 00:07
ETH: GPU0 28.990 Mh/s, GPU1 30.457 Mh/s, GPU2 13.243 Mh/s, GPU3 11.957 Mh/s, GPU4 30.671 Mh/s, GPU5 30.545 Mh/s, GPU6 29.518 Mh/s
 LBC - Total Speed: 488.468 Mh/s, Total Shares: 71, Rejected: 0
 LBC: GPU0 83.346 Mh/s, GPU1 87.563 Mh/s, GPU2 29.797 Mh/s, GPU3 26.904 Mh/s, GPU4 88.179 Mh/s, GPU5 87.815 Mh/s, GPU6 84.864 Mh/s
ETH: 10/12/17-07:30:08 - SHARE FOUND - (GPU 0)
ETH: Share accepted (78 ms)!
 LBC: 10/12/17-07:30:09 - SHARE FOUND - (GPU 4)
 LBC: Share accepted (109 ms)!
 LBC: 10/12/17-07:30:12 - SHARE FOUND - (GPU 1)
 LBC: Share accepted (94 ms)!
ETH: 10/12/17-07:30:15 - New job from daggerhashimoto.eu.nicehash.com:3353
ETH - Total Speed: 172.323 Mh/s, Total Shares: 28, Rejected: 3, Time: 00:07
ETH: GPU0 26.254 Mh/s, GPU1 30.336 Mh/s, GPU2 13.199 Mh/s, GPU3 11.953 Mh/s, GPU4 30.621 Mh/s, GPU5 30.456 Mh/s, GPU6 29.505 Mh/s
 LBC - Total Speed: 479.706 Mh/s, Total Shares: 73, Rejected: 0
 LBC: GPU0 75.480 Mh/s, GPU1 87.214 Mh/s, GPU2 29.696 Mh/s, GPU3 26.895 Mh/s, GPU4 88.035 Mh/s, GPU5 87.560 Mh/s, GPU6 84.826 Mh/s
 LBC: 10/12/17-07:30:21 - SHARE FOUND - (GPU 5)
 LBC: Share accepted (94 ms)!

Thanks!

coinsaburou

member

Activity: 84

Merit: 10

INS Ecosystem

I tried the new version , speed not change.

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: P00P135 on October 12, 2017, 01:45:30 AM

Quote from: Bael on October 12, 2017, 01:03:50 AM

Hi

I have a problem with the Claymore boot, for some reason it only detects 3 gigabytes of the 4 that my gpu has

I made a clean installation of win10, using the latest version of Claymore with a rx 580 4GB and everything worked fine, but after some reboot the miner started to fail the boot and close the software.

Checking the logs only recognizes 3 GB of the 4 that should recognize.

Do you know what the problem could be?

Please excuse my bad english, I use a translator and I'm sure it will not be very suitable.

regards

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

Make sure your bat file has this.

LOL. your gut feeling that these variables have something to do with memory is correct, but detection is not allocation, hence nothing to do with this case here

... also allowing some pointer to be in 32bits may cause the opposite effect.. in theory

Ursul0

sr. member

Activity: 857

Merit: 262

Quote from: Bael on October 12, 2017, 01:03:50 AM

I have a problem with the Claymore boot, for some reason it only detects 3 gigabytes of the 4 that my gpu has

I made a clean installation of win10, using the latest version of Claymore with a rx 580 4GB and everything worked fine, but after some reboot the miner started to fail the boot and close the software.

is your win10 a 64 bit install? how much RAM you've got?

in general:
Do proper DDU with reboots (until you see all adapters as MS in device manager), remove all hidden monitors, install drivers & patch, set mem to stock and core to 1080MHz with volts at ~ 0.900ish = all should work. if it doesn't check your physical connections (raisers, raisers power, etc)

informatuss

newbie

Activity: 36

Merit: 0

I've got problem with windows freezing when I'm closing claymore after GPU hangs in OpenCL.
I need to do hard reset most of the time.
Same problem with 3 rigs, all windows 10, all RX580.

I had -r 1 for reboot and now I'm using -r -1 -wd 0
still same problem.

P00P135

full member

Activity: 1123

Merit: 136

Quote from: Bael on October 12, 2017, 01:03:50 AM

Hi

I have a problem with the Claymore boot, for some reason it only detects 3 gigabytes of the 4 that my gpu has

I made a clean installation of win10, using the latest version of Claymore with a rx 580 4GB and everything worked fine, but after some reboot the miner started to fail the boot and close the software.

Checking the logs only recognizes 3 GB of the 4 that should recognize.

Do you know what the problem could be?

Please excuse my bad english, I use a translator and I'm sure it will not be very suitable.

regards

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

Make sure your bat file has this.

Bael

jr. member

Activity: 87

Merit: 2

Hi

I have a problem with the Claymore boot, for some reason it only detects 3 gigabytes of the 4 that my gpu has

I made a clean installation of win10, using the latest version of Claymore with a rx 580 4GB and everything worked fine, but after some reboot the miner started to fail the boot and close the software.

Checking the logs only recognizes 3 GB of the 4 that should recognize.

Do you know what the problem could be?

Please excuse my bad english, I use a translator and I'm sure it will not be very suitable.

regards

drak24

newbie

Activity: 22

Merit: 0

Having an issue with one of my 480 cards giving a low hashrate and I notice the memory/core being stuck at 300mHz. Also, when running claymore the computer gets sluggish, something that never used to happen. I've tried uninstalling/re-installing drivers, changing the page file to 16 or 32, plugging in/out monitors, disabling/enabling in device manager, none of which has worked. Some info on my setup:

2 ATI Radeon RX 480 8GB with modded bios (samsung memory)
ASRock X370 Taichi (AM4) Motherboard
AMD Ryzen 7
Windows 10 64bit
32GB Ram

This used to work fine but I haven't ran claymore on it since version 9.7's release. Updated to 10, same results on both though. Any suggestions or ideas?

heavyarms1912

full member

Activity: 729

Merit: 114

How to make claymore work with multigpu and 4gb ram. Linux works fine but not windows.
EDIT: worked with 16gb of virtual memory.

jimmykl

full member

Activity: 349

Merit: 102

Quote from: milicic on October 11, 2017, 07:21:23 PM

Quote from: greatauror28 on October 10, 2017, 12:48:36 PM

Quote from: NewbieMiner17 on October 10, 2017, 07:03:05 AM

Quote from: milicic on October 09, 2017, 01:15:08 PM

Quote from: Good_Boy on October 09, 2017, 09:35:32 AM

Quote from: greatauror28 on October 09, 2017, 01:07:27 AM

Quote from: milicic on October 08, 2017, 08:09:05 PM

Does anyone know is today the day of Byzantium release on ethereum network? I read it should be released on October 9th. It should reduce blocktime from 30s to 14s (but also reduce reward from 5eth to 3eth per block). It would be increase 24% from current state...

23% to be exact.

It will be deployed when block reaches 4,370,000.

I see news about reducing the block time from 30s to 20s, will see. 14s it is better. But if 14s be true, 3gb 1060 may lose relevance before PoS.

For how long you think rx 470 4gb will be able to mine eth?

Not sure how the block time change will affect it but I believe the issue with size is actually down to the DAG size. From that the approximation is below

The 3GB limit will be hit around mid-April 2018
The 4GB limit will be hit around mid-September 2019

Correction - 3gb cards will be useless by November 2018, not April as per this reddit post.

4GB cards, probably Nov 2019 or later.

Quote from: Branko on October 10, 2017, 12:24:13 PM

Do we need miner update for Byzantium?

Not that I know of - if you're mining with a pool.
Solo miners must update their software.

Werent there stories that 4gb cards will not be able to mine eth after march 2018?

There were stories no-one would be able to mine eth after march 2018! ;-)

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 571. (Read 6590565 times)