Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 572. (Read 6590565 times)

Correction - 3gb cards will be useless by November 2018, not April as per this reddit post.

4GB cards, probably Nov 2019 or later.


Not that I know of - if you're mining with a pool.
Solo miners must update their software.

we are talking about Asus rx 580 dual 8gb OC with samsung memory.

I love learning all this stuff it’s giving me more knowledge 👍🏻👍🏻👍🏻👐🏼

1. I still cannot reproduce this issue, I described what tests I did: https://bitcointalksearch.org/topic/m.21966972
If you have ste-by-step guide how to reproduce this issue - let me know.
2. I'm not sure if it is possible to fix this issue at all, since all these issues are from buggy ADL.

I'm using custom straps 

Hi again! And how did you achieved such a great result??? My cards, but on UberMix3.2 are giving me just 172 on dual mining with dcri 25

1 of my cards is working like 10/15 min at full and then crashing 0/mhs... How to fix it? The rest are ok.

Do you have pagefile set to atleast 16gb?

Hi:

I have a mining rig as follows:

6 NVIDIA GTX 1060 GPUs 6GB each
Windows 10, 1703
Intel Pentium CPU G4400 @ 3300 Ghz, 4GB of RAM
Claymore's miner v10.0 in Ethereum solo mining with DevFee always on

I have a reported hasrate of 121MH/s, an average share rate of about 120 shares per hour, and want to increase the effective hasrate of the mining rig (by increasing the share rate I guess)

1) How can I raise the share rate?
2) I can't switch the NVIDIA cards to P0 power state. Now they are working at P2 state. Also, I think they should be in "COMPUTE ONLY MODE", but neither can I do this. I think that doing this will increase share rate. Does Claymore can do this and / or help me with such power state change and / or "COMPUTE ONLY MODE" change?
3) Increasing main RAM can increase the share rate at all? If so, how much RAM do I have to put on my system in order to have a higher share rate? What if I put 64GB of RAM on my mining rig? Does this change in RAM will "drive" to a 10 times raise in shares per hour in my mining rig?

Best regards, you have the best mining software!!!

480 or 580? 4GB or 8GB? I have a 6x RX 480 (8GB) rig and they hashes ~29.1 up to 29.6, ~176MH/s.

Hi again! And how did you achieved such a great result??? My cards, but on UberMix3.2 are giving me just 172 on dual mining with dcri 25

Hi again! And how did you achieved such a great result??? My cards, but on UberMix3.2 are giving me just 172 on dual mining with dcri 25

Hi guys,

I have some new rig 470/480/570/580 (about 10). Some of them are working great and stable, others not.

GPU0 t=77C fan=80%, GPU1 t=76C fan=79%, GPU2 t=81C fan=79%, GPU3 t=69C fan=78%, GPU4 t=69C fan=79%, GPU5 t=78C fan=78%
ETH: 10/10/17-11:10:50 - New job from exp.epool.xyz:3333
ETH - Total Speed: 148.773 Mh/s, Total Shares: 3942, Rejected: 0, Time: 14:26
ETH: GPU0 23.809 Mh/s, GPU1 29.829 Mh/s, GPU2 30.169 Mh/s, GPU3 12.744 Mh/s, GPU4 22.027 Mh/s, GPU5 30.196 Mh/s

As you can see, this is a rig with 6 Rx580 (exactly the same: manufactor, memory type..) with modded bios. GPU 1,2,5 work fine, but GPU 0,3,4 is not, they never reach other's speed (100% gpu usage, the same core/memory clock in GPU-Z) except the begining of mining (when I start the miner, the fist hashrate of them usually great, then drop rapidly after 2 or 3 times showing speed )and I really have no idea about this problems.

This problem also happen with the 470/480/570/580 rig, sometime only 1 low-speed GPU, sometime 3-4 GPUs, with any GPU driver I can get (the original CD driver or the fix dag beta or the newest driver on website), with claymore miner 9.7, 9.7 or 10. These rigs have differrent mainboard, CPU too. Note that all GPU I have tested on my main desktop and got all great hashrate.

After a little bit searching, I found that somebody have similar problem on win10 with very low hashrate (~2-3Mh/s) and solved when install win7, but I dont think it's the root cause so I raise them here to get some discussion (and I dont want to run it on win7 too).

I using win10 64bit, 4GB RAM, ~20GB virtual memory.


Thanks for your help.

Earlier this week, I played with them again to squeeze in few more Mh. These are my settings:
-cclock 1140
-mclock 2075
-cvddc 875
-mvddc 875

They average a total of 177.5 now and cards hashes from 29.5 up to 30.0. But the best thing is they now only pull 1035w dual-mining with DCR.

Not sure how the block time change will affect it but I believe the issue with size is actually down to the DAG size. From that the approximation is below

The 3GB limit will be hit around mid-April 2018
The 4GB limit will be hit around mid-September 2019

Do we need miner update for Byzantium?