Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 787.

Yenihan

newbie

Activity: 9

Merit: 0

Quote from: sir4o on June 26, 2017, 09:32:49 AM

Quote from: Yenihan on June 26, 2017, 08:53:54 AM

Hi guys,

Im using claymore 9.3/9.5/9.6

Specs MSI Z170A gaming carbon pro
Intel CPU G4400
4 GB RAM
for now 4 * MSI RX 580 ARMOR OC (later up to 6 when I get my 1000 watt PSU) // Hynix memory // Drivers 17.4.4
Corsair 750watt Platinium

I use this bios https://anorak.tech/t/msi-rx-580-armor-oc-8gb-hynix/5933/11
-cvddc 900 -cclock 1200 -mclock 2080

I running this rig a few days. Can we say this is stable. Sometimes i see dips to 109 mh/s, this is normal?

- Claymore screenshot https://i.imgur.com/y9jf0Km.jpg
- GPU-Z screenshot https://i.imgur.com/2nOloJL.jpg

I have the same MB, CPU but mining with 6x470s

From the GPU-Z screen, I'd say something is wrong with the OC - some of the cards are running with default voltage. Also wondering how your GPU3 is using significantly less watts (almost impossible).....

I have been testing all ports on the MB. PCI-E ports 2 and 3 are broken. When I using different carts on these ports using less watts and not stable. When I use GPU cards on PCI-E ports 1, 4, 5 and 6 i have stable hashing rate and using 100 watt. You can see here https://i.imgur.com/cbNRs5O.jpg

Are you using -mvddc for underclock your memory?

fredeq

legendary

Activity: 1537

Merit: 1005

Quote from: fredeq on June 26, 2017, 09:05:45 AM

Quote from: beni1107 on June 26, 2017, 07:21:13 AM

Hey guys i have problem with low hash rate gettin 13 to max 15 mhs on Claymore
Specs
5x Gtx 1060 6gb windforce from Gigabyte
Motherboard: Asus strix h270f
Psu 850w and 8gb of ram

Windows 10 fully updated with lastest drivers.
Tried on windows 7 same result.
Tried recommende drivers by Claymore
Tried older versions of drivers till 369
Tried Claymores versions 9.5 and 9.4 with all cudas versions.
Tried with single card direct to Pcie

Can somebe help

I would like to see a possible solution for this as well.
Happens for a friend on win10 for 5x1070 and 1x1060

All other algorithms except for equihash are working ok. (1070 hashes 330 instead of 420)

All good in the end. Creators update to win10 wasnt applied correctly at the first run.

@tpd09
It will be added next month, card already ordered.

tpd09

full member

Activity: 287

Merit: 100

Quote from: xeridea on June 26, 2017, 09:11:27 AM

Quote from: juvx on June 26, 2017, 09:04:30 AM

Hi guys what are you guys getting on Eth / LBRY?

Im getting 1070

29 MH/s ETH and 28 MH /s LBRY

and 1080 Ti

36 MH/Sec ETH amd 35 MH/s LBRY

is this normal? My 1080 TI can do 520 MH/s LBRY solo. #5 seems really low unless its using the same part of GPU to mine ETH?

Is there a better coin to mine with more performance you'd recommend?

LBRY doesn't dual mine well, you end up losing eth speed easily. Nvidia cards also arent as good as AMD for dual mining. CM says he is working on an ASM kernel for dual mining LBRY, 2x speedup for LBRY, but AMD only.

Here is site for checking profits, for Nvidia, generally LBRY and Zec on top, dual mining eth/sia next, depends on cards, 1080/TI aren't as effective at Eth due to GDDR5X.

www.whattomine.com

how come whattomine does not have the 1080ti included?

juvx

newbie

Activity: 38

Merit: 0

Quote from: Technicrate on June 26, 2017, 12:48:42 PM

Quote from: juvx on June 26, 2017, 09:44:20 AM

Quote from: xeridea on June 26, 2017, 09:11:27 AM

Quote from: juvx on June 26, 2017, 09:04:30 AM

What is the speed for dual mining?

I've only tested Eth / lbry
its 36 MH eth and 35 MH Lbry

alesx.onfire

hero member

Activity: 966

Merit: 1000

It's Not Enough

Quote from: wartimekillers on June 26, 2017, 01:52:43 PM

Claymore miners always crash when its start, but nicehash integrated claymore miners runs normally

what os are u using?

wartimekillers

newbie

Activity: 21

Merit: 0

Claymore miners always crash when its start, but nicehash integrated claymore miners runs normally

iBook

newbie

Activity: 6

Merit: 0

Quote from: TechPark on June 26, 2017, 12:56:12 AM

- do not use Microsoft Remote Connection app - use Teamviewer or VNC instead

it's not true. I use RDP without any problem with hashrate.
Connect from OSX, iOS, Windows.

spyshagg

full member

Activity: 176

Merit: 100

Quote from: torig on June 26, 2017, 12:59:08 PM

Quote from: chancoin on June 26, 2017, 12:32:25 PM

Quote from: torig on June 26, 2017, 12:29:00 PM

some testing.. 2 GTX 1060
Why only 2.6 MHs
Huh

and nothing accepted?

Did you update Windows?

Win 10,update disabled,
8GB memory,virtual memory 16GB

update windows. Creators update.

torig

full member

Activity: 242

Merit: 100

Quote from: chancoin on June 26, 2017, 12:32:25 PM

Quote from: torig on June 26, 2017, 12:29:00 PM

some testing.. 2 GTX 1060
Why only 2.6 MHs
Huh

and nothing accepted?

Did you update Windows?

Win 10,update disabled,
8GB memory,virtual memory 16GB

Technicrate

newbie

Activity: 68

Merit: 0

Quote from: juvx on June 26, 2017, 09:44:20 AM

Quote from: xeridea on June 26, 2017, 09:11:27 AM

Quote from: juvx on June 26, 2017, 09:04:30 AM

Hi guys what are you guys getting on Eth / LBRY?

Im getting 1070

29 MH/s ETH and 28 MH /s LBRY

and 1080 Ti

36 MH/Sec ETH amd 35 MH/s LBRY

is this normal? My 1080 TI can do 520 MH/s LBRY solo. #5 seems really low unless its using the same part of GPU to mine ETH?

Is there a better coin to mine with more performance you'd recommend?

LBRY doesn't dual mine well, you end up losing eth speed easily. Nvidia cards also arent as good as AMD for dual mining. CM says he is working on an ASM kernel for dual mining LBRY, 2x speedup for LBRY, but AMD only.

Here is site for checking profits, for Nvidia, generally LBRY and Zec on top, dual mining eth/sia next, depends on cards, 1080/TI aren't as effective at Eth due to GDDR5X.

www.whattomine.com

Thanks for the reply, so my results are normal?

I really hope the Nvidia cards get optimized for dual a bit more.

Its true 1080 TI ROI is a bit longer, but its a beast of a card. I just need to figure out where to point its power. It does 36 MH/s in eth solo and 520 MH/s in just LBRY solo.

What is the speed for dual mining?

chancoin

newbie

Activity: 6

Merit: 0

Quote from: torig on June 26, 2017, 12:29:00 PM

some testing.. 2 GTX 1060
Why only 2.6 MHs
Huh

and nothing accepted?
https://i.imgur.com/4CdCDqx.png

Did you update Windows?

torig

full member

Activity: 242

Merit: 100

some testing.. 2 GTX 1060
Why only 2.6 MHs
Huh

and nothing accepted?

f5alcon

newbie

Activity: 28

Merit: 0

Any chance these new optimizations can be added? I don't want to give up dual mining. https://www.reddit.com/r/EtherMining/comments/6jjhob/ethereum_code_optimized_for_some_nvidian_cards/

juvx

newbie

Activity: 38

Merit: 0

Quote from: xeridea on June 26, 2017, 09:11:27 AM

Quote from: juvx on June 26, 2017, 09:04:30 AM

Hi guys what are you guys getting on Eth / LBRY?

Im getting 1070

29 MH/s ETH and 28 MH /s LBRY

and 1080 Ti

36 MH/Sec ETH amd 35 MH/s LBRY

is this normal? My 1080 TI can do 520 MH/s LBRY solo. #5 seems really low unless its using the same part of GPU to mine ETH?

Is there a better coin to mine with more performance you'd recommend?

LBRY doesn't dual mine well, you end up losing eth speed easily. Nvidia cards also arent as good as AMD for dual mining. CM says he is working on an ASM kernel for dual mining LBRY, 2x speedup for LBRY, but AMD only.

Here is site for checking profits, for Nvidia, generally LBRY and Zec on top, dual mining eth/sia next, depends on cards, 1080/TI aren't as effective at Eth due to GDDR5X.

www.whattomine.com

Thanks for the reply, so my results are normal?

I really hope the Nvidia cards get optimized for dual a bit more.

Its true 1080 TI ROI is a bit longer, but its a beast of a card. I just need to figure out where to point its power. It does 36 MH/s in eth solo and 520 MH/s in just LBRY solo.

sir4o

newbie

Activity: 67

Merit: 0

Quote from: Yenihan on June 26, 2017, 08:53:54 AM

Hi guys,

Im using claymore 9.3/9.5/9.6

Specs MSI Z170A gaming carbon pro
Intel CPU G4400
4 GB RAM
for now 4 * MSI RX 580 ARMOR OC (later up to 6 when I get my 1000 watt PSU) // Hynix memory // Drivers 17.4.4
Corsair 750watt Platinium

I use this bios https://anorak.tech/t/msi-rx-580-armor-oc-8gb-hynix/5933/11
-cvddc 900 -cclock 1200 -mclock 2080

I running this rig a few days. Can we say this is stable. Sometimes i see dips to 109 mh/s, this is normal?

- Claymore screenshot https://i.imgur.com/y9jf0Km.jpg
- GPU-Z screenshot https://i.imgur.com/2nOloJL.jpg

I have the same MB, CPU but mining with 6x470s

From the GPU-Z screen, I'd say something is wrong with the OC - some of the cards are running with default voltage. Also wondering how your GPU3 is using significantly less watts (almost impossible).....

xeridea

sr. member

Activity: 449

Merit: 251

Quote from: juvx on June 26, 2017, 09:04:30 AM

Hi guys what are you guys getting on Eth / LBRY?

Im getting 1070

29 MH/s ETH and 28 MH /s LBRY

and 1080 Ti

36 MH/Sec ETH amd 35 MH/s LBRY

is this normal? My 1080 TI can do 520 MH/s LBRY solo. #5 seems really low unless its using the same part of GPU to mine ETH?

Is there a better coin to mine with more performance you'd recommend?

LBRY doesn't dual mine well, you end up losing eth speed easily. Nvidia cards also arent as good as AMD for dual mining. CM says he is working on an ASM kernel for dual mining LBRY, 2x speedup for LBRY, but AMD only.

Here is site for checking profits, for Nvidia, generally LBRY and Zec on top, dual mining eth/sia next, depends on cards, 1080/TI aren't as effective at Eth due to GDDR5X.

www.whattomine.com

fredeq

legendary

Activity: 1537

Merit: 1005

Quote from: beni1107 on June 26, 2017, 07:21:13 AM

Hey guys i have problem with low hash rate gettin 13 to max 15 mhs on Claymore
Specs
5x Gtx 1060 6gb windforce from Gigabyte
Motherboard: Asus strix h270f
Psu 850w and 8gb of ram

Windows 10 fully updated with lastest drivers.
Tried on windows 7 same result.
Tried recommende drivers by Claymore
Tried older versions of drivers till 369
Tried Claymores versions 9.5 and 9.4 with all cudas versions.
Tried with single card direct to Pcie

Can somebe help

I would like to see a possible solution for this as well.
Happens for a friend on win10 for 5x1070 and 1x1060

All other algorithms except for equihash are working ok. (1070 hashes 330 instead of 420)

juvx

newbie

Activity: 38

Merit: 0

Hi guys what are you guys getting on Eth / LBRY?

Im getting 1070

29 MH/s ETH and 28 MH /s LBRY

and 1080 Ti

36 MH/Sec ETH amd 35 MH/s LBRY

is this normal? My 1080 TI can do 520 MH/s LBRY solo. #5 seems really low unless its using the same part of GPU to mine ETH?

Is there a better coin to mine with more performance you'd recommend?

Yenihan

newbie

Activity: 9

Merit: 0

Hi guys,

Im using claymore 9.3/9.5/9.6

Specs MSI Z170A gaming carbon pro
Intel CPU G4400
4 GB RAM
for now 4 * MSI RX 580 ARMOR OC (later up to 6 when I get my 1000 watt PSU) // Hynix memory // Drivers 17.4.4
Corsair 750watt Platinium

I use this bios https://anorak.tech/t/msi-rx-580-armor-oc-8gb-hynix/5933/11
-cvddc 900 -cclock 1200 -mclock 2080

I running this rig a few days. Can we say this is stable. Sometimes i see dips to 109 mh/s, this is normal?

- Claymore screenshot https://i.imgur.com/y9jf0Km.jpg
- GPU-Z screenshot https://i.imgur.com/2nOloJL.jpg

kardus

newbie

Activity: 20

Merit: 0

Are the new optimisations found here something that can be applied any time soon? It's quite a significant increase. https://github.com/Genoil/cpp-ethereum/pull/228

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 787. (Read 6590757 times)