Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 82.

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: UnclWish on September 25, 2019, 06:24:11 AM

Quote from: big_daddy on September 25, 2019, 01:50:12 AM

Quote from: UnclWish on September 24, 2019, 09:17:16 AM

Quote from: big_daddy on September 24, 2019, 07:59:32 AM

Quote from: UnclWish on September 24, 2019, 07:36:05 AM

Polaris. RX 580 8Gb. On Phoenix miner i have 34,2MH with cclock 1230 mclock 2250.

Polaris ok, but what type of memory? Samsung, Elpida, Hynix, Micron?
And what is the power consumption of your card running on 34.2 MHs?

I have only with hynix. And it give 34.2MH on PM. Power consumption about 90-100W from sensor. About 125W from wall.

Can you please tell me the OS version and what drivers are you using
Cause your results are simply gorgeous

Windows 10 x64 Pro, 19.9.2 drivers (not WHQL). I'm using my own straps )))) On Claymore with rxboost I have 33,5-33,7MH

Ok, so here is the main answer
You have some great straps
And is there any chance you share them with us?

evlo

jr. member

Activity: 155

Merit: 4

i would guess virtual memory issue

davidsheng

newbie

Activity: 5

Merit: 0

Quote from: davidsheng on September 08, 2019, 10:40:19 PM

Hi everyone. I need some help regarding mining with P106.

Rig specs:
- 7x Zotac P106, total sightly below 170 Mh/s
- Windows 7 64-bit
- nVidia driver version 382.53
- Claymore miner version 11.0 (any version newer than this will always crash for me!)
- MSI Afterburner version 4.4.2
- Virtual memory sufficiently high

Current situation:
- Been running this setup for past ~2 years with very few issues
- I've paid thousands of USD in fees to Claymore since the beginning
- Happy with performance, consistency and stability
- It's working fine right now

Problem:
- I am being forced to abandon v11.0 and install v15.0 once DAG #299 comes out
- I have tested the newer clients including v15.0, but they always crash to desktop immediately after detecting the GPUs
- This doesn't happen with v10 or v11
- Updating nVidia drivers to latest version / CUDA version makes no difference
- Phoenix miner is even worse for me (individual GPUs crash very frequently)

Anyone with similar experience / solution? Your comments will be hugely appreciated. Thanks!

Bumping this. Still in need of a solution. Adding more RAM did not work, the new clients still crash to desktop.

Is there a way to just get v11.0 to run past DAG #299?

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: big_daddy on September 25, 2019, 01:50:12 AM

Quote from: UnclWish on September 24, 2019, 09:17:16 AM

Quote from: big_daddy on September 24, 2019, 07:59:32 AM

Quote from: UnclWish on September 24, 2019, 07:36:05 AM

Polaris. RX 580 8Gb. On Phoenix miner i have 34,2MH with cclock 1230 mclock 2250.

Polaris ok, but what type of memory? Samsung, Elpida, Hynix, Micron?
And what is the power consumption of your card running on 34.2 MHs?

I have only with hynix. And it give 34.2MH on PM. Power consumption about 90-100W from sensor. About 125W from wall.

Can you please tell me the OS version and what drivers are you using
Cause your results are simply gorgeous

Windows 10 x64 Pro, 19.9.2 drivers (not WHQL). I'm using my own straps )))) On Claymore with rxboost I have 33,5-33,7MH

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: UnclWish on September 24, 2019, 09:17:16 AM

Quote from: big_daddy on September 24, 2019, 07:59:32 AM

Quote from: UnclWish on September 24, 2019, 07:36:05 AM

Polaris. RX 580 8Gb. On Phoenix miner i have 34,2MH with cclock 1230 mclock 2250.

Polaris ok, but what type of memory? Samsung, Elpida, Hynix, Micron?
And what is the power consumption of your card running on 34.2 MHs?

I have only with hynix. And it give 34.2MH on PM. Power consumption about 90-100W from sensor. About 125W from wall.

Can you please tell me the OS version and what drivers are you using
Cause your results are simply gorgeous

EnglishGentleman

jr. member

Activity: 33

Merit: 1

Quote from: Claymore on April 11, 2016, 10:30:36 AM

Claymore's Dual Ethereum + Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak AMD+NVIDIA GPU Miner.
=========================

Latest version is v15.0 - Supercharged Edition:

- now miner supports up to #384 epoch (4GB DAG size). Note that previous versions support up to #299 epoch, you will not be able to use old versions after #299 epoch.
- added support for Navi cards (ETH-only mode).
- now miner sets environment variables automatically (required for 4GB AMD cards).
- a few minor bug fixes and improvements.

Hello Sir

Claymore 14.7 is working fine on a machine with two RX480 8GByte Red-Devils.

However Claymore 15 says cudart64_100.dll was not found

This occurs immediately on clicking start.bat and no log files are created.

I am not running any Nvidia Cards.

I am running Windows 10 Pro with 8GBytes of RAM and and Intel G4400 CPU 3.3 GHz. Its a Gigabyte H170 motherboard.

Windows 10 version 1803 and build 17134.1.

Radeon Drivers are 24.20.13011.1009 with date 27/08/2018. They are patched with driver patcher.

How can the problem be fixed please? As I say, Claymore 14_7 runs fine. So v15 should work

Adding -platform 1 (for AMD) makes no difference.

Here is the BAT file with the wallet address removed Thanks for your support.

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.eu-new.nicehash.com:3353 -ewal XXXXXX -esm 3 -r 1 -epsw x -gser 2 -eres 8 -mclock 2000,2050 -cclock 1050,1126 -allpools 1 -mode 1 -tt 74,74 -fanmin 80,80 -cvddc 850,850 -mvddc 870,870 -rxboost 1 -allcoins 300 -lidag 1
Pause

NCarter84

jr. member

Activity: 195

Merit: 4

Quote from: zz0622 on September 24, 2019, 02:01:22 PM

I tried to set EthDcrMiner64.exe to run as administrator in properties page.

The window just pop up and close rapidly after I double click the batch |o|.

I'm using Win10 1709 and 1803 version. Is it too old to cause this issue?

Thank you mate : )

Quote from: NCarter84 on September 24, 2019, 12:45:24 PM

Quote from: zz0622 on September 24, 2019, 09:21:19 AM

Got the same problem either.

it shows "Driver is in use, try to start miner with "-driver uninstall" parameter" when I add "-strap 1" in batch file

I try to add "-driver uninstall" in the file and runs it but it shows it require Administrator to access it.

I add "runas /user:Administrator" in batch file but it just can't run appropriately and close the window rapidly.

My cards are gtx1070 with latest driver version 436.3 in Win10 64bit

May anyone please let me know how can I solve this problem?

Thank you for the kindly help.

Quote from: badworm on May 15, 2019, 07:17:47 PM

Both v14.2 do BSOD with Vega and 19.5.1 when I use -strap.

PAGE_FAULT_IN_NONPAGED_AREA
cmdrv64.sys

Strap Drivers are already in use when you load another instance of the miner. Here is log from b711 version :

01:37:11:329   fcc   Driver is not installed! Trying to install it...
01:37:11:373   fcc   Driver is in use, try to start miner with "-driver uninstall" parameter.
01:37:11:792   fcc   SSL: Imported 76 certificates from local storage

Rgds

Right click the miner, Properties and go to the Compatibility Tab and check the box "Run this program as an admin".

Nope.

Put a pause at the end of the bat file and see what error its throwing then you can work from there.

zz0622

newbie

Activity: 14

Merit: 0

I tried to set EthDcrMiner64.exe to run as administrator in properties page.

The window just pop up and close rapidly after I double click the batch |o|.

I'm using Win10 1709 and 1803 version. Is it too old to cause this issue?

Thank you mate : )

Quote from: NCarter84 on September 24, 2019, 12:45:24 PM

Quote from: zz0622 on September 24, 2019, 09:21:19 AM

Got the same problem either.

it shows "Driver is in use, try to start miner with "-driver uninstall" parameter" when I add "-strap 1" in batch file

I try to add "-driver uninstall" in the file and runs it but it shows it require Administrator to access it.

I add "runas /user:Administrator" in batch file but it just can't run appropriately and close the window rapidly.

My cards are gtx1070 with latest driver version 436.3 in Win10 64bit

May anyone please let me know how can I solve this problem?

Thank you for the kindly help.

Quote from: badworm on May 15, 2019, 07:17:47 PM

Both v14.2 do BSOD with Vega and 19.5.1 when I use -strap.

PAGE_FAULT_IN_NONPAGED_AREA
cmdrv64.sys

Strap Drivers are already in use when you load another instance of the miner. Here is log from b711 version :

01:37:11:329   fcc   Driver is not installed! Trying to install it...
01:37:11:373   fcc   Driver is in use, try to start miner with "-driver uninstall" parameter.
01:37:11:792   fcc   SSL: Imported 76 certificates from local storage

Rgds

Right click the miner, Properties and go to the Compatibility Tab and check the box "Run this program as an admin".

NCarter84

jr. member

Activity: 195

Merit: 4

Quote from: zz0622 on September 24, 2019, 09:21:19 AM

Got the same problem either.

it shows "Driver is in use, try to start miner with "-driver uninstall" parameter" when I add "-strap 1" in batch file

I try to add "-driver uninstall" in the file and runs it but it shows it require Administrator to access it.

I add "runas /user:Administrator" in batch file but it just can't run appropriately and close the window rapidly.

My cards are gtx1070 with latest driver version 436.3 in Win10 64bit

May anyone please let me know how can I solve this problem?

Thank you for the kindly help.

Quote from: badworm on May 15, 2019, 07:17:47 PM

Both v14.2 do BSOD with Vega and 19.5.1 when I use -strap.

PAGE_FAULT_IN_NONPAGED_AREA
cmdrv64.sys

Strap Drivers are already in use when you load another instance of the miner. Here is log from b711 version :

01:37:11:329   fcc   Driver is not installed! Trying to install it...
01:37:11:373   fcc   Driver is in use, try to start miner with "-driver uninstall" parameter.
01:37:11:792   fcc   SSL: Imported 76 certificates from local storage

Rgds

Right click the miner, Properties and go to the Compatibility Tab and check the box "Run this program as an admin".

zz0622

newbie

Activity: 14

Merit: 0

Got the same problem either.

it shows "Driver is in use, try to start miner with "-driver uninstall" parameter" when I add "-strap 1" in batch file

I try to add "-driver uninstall" in the file and runs it but it shows it require Administrator to access it.

I add "runas /user:Administrator" in batch file but it just can't run appropriately and close the window rapidly.

My cards are gtx1070 with latest driver version 436.3 in Win10 64bit

May anyone please let me know how can I solve this problem?

Thank you for the kindly help.

Quote from: badworm on May 15, 2019, 07:17:47 PM

Both v14.2 do BSOD with Vega and 19.5.1 when I use -strap.

PAGE_FAULT_IN_NONPAGED_AREA
cmdrv64.sys

Strap Drivers are already in use when you load another instance of the miner. Here is log from b711 version :

01:37:11:329   fcc   Driver is not installed! Trying to install it...
01:37:11:373   fcc   Driver is in use, try to start miner with "-driver uninstall" parameter.
01:37:11:792   fcc   SSL: Imported 76 certificates from local storage

Rgds

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: big_daddy on September 24, 2019, 07:59:32 AM

Quote from: UnclWish on September 24, 2019, 07:36:05 AM

Polaris. RX 580 8Gb. On Phoenix miner i have 34,2MH with cclock 1230 mclock 2250.

Polaris ok, but what type of memory? Samsung, Elpida, Hynix, Micron?
And what is the power consumption of your card running on 34.2 MHs?

I have only with hynix. And it give 34.2MH on PM. Power consumption about 90-100W from sensor. About 125W from wall.

big_daddy

hero member

Activity: 1680

Merit: 583

xUSD - The PRIVATE stable coin - Haven Protocol

Quote from: UnclWish on September 24, 2019, 07:36:05 AM

Polaris. RX 580 8Gb. On Phoenix miner i have 34,2MH with cclock 1230 mclock 2250.

Polaris ok, but what type of memory? Samsung, Elpida, Hynix, Micron?
And what is the power consumption of your card running on 34.2 MHs?

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: RAKOT on September 24, 2019, 06:55:31 AM

Quote from: Guigs321 on September 23, 2019, 02:18:22 AM

Quote from: JoWannes on September 22, 2019, 04:51:28 AM

Quote from: NCarter84 on September 21, 2019, 01:32:36 PM

Sounds like compute mode is on.

Thanks for the hint. The registry edits I found here fixed it for me: https://monero.farm/disable-crossfire-and-enable-compute-mode-in-one-click/
Still running only 175~176MH/s instead of 182~183 before, but yeah, it will do for now.

I reach 33,1 MH/s per card with exactly the same setup here my settings for Claymore :

-dcri 24 -cclock 1220 -mclock 2200 -cvddc 900 -tt 65 -strap 2 -rxboost 1

What GPU can reach such speed ?

Polaris. RX 580 8Gb. On Phoenix miner i have 34,2MH with cclock 1230 mclock 2250.

gedeonodn

newbie

Activity: 9

Merit: 0

Quote from: Malwolficus on September 22, 2019, 10:35:45 AM

I’m running the latest version on Ubuntu 16, from command line, and none of the “tt” or “r” options seem to work. I have a card that stops hashing after an hour or two and a simple restart fixes it - but I have to restart the miner manually, no matter what I do the autorestart won’t autorestart. How can I go about troubleshooting why this command doesn’t work?

Use this script, run as root:

Code:

#!/bin/bash

if [ -z $1 ]
then
        echo "gpunum not set"
        exit 0
fi

managefilepath="/sys/class/drm/card$1/device/power_dpm_force_performance_level"
fanfilepath=$(find /sys/class/drm/card"$1"/device/hwmon -regextype posix-awk -regex ".*/hwmon[0-9]{1,2}")/pwm1_enable

chmod 666 "$managefilepath"
chmod 666 "$fanfilepath"
echo manual > "$managefilepath"
echo "1" > "$fanfilepath"

put gpu number in parameter, use for each card

RAKOT

jr. member

Activity: 152

Merit: 8

Quote from: Guigs321 on September 23, 2019, 02:18:22 AM

Quote from: JoWannes on September 22, 2019, 04:51:28 AM

Quote from: NCarter84 on September 21, 2019, 01:32:36 PM

Sounds like compute mode is on.

Thanks for the hint. The registry edits I found here fixed it for me: https://monero.farm/disable-crossfire-and-enable-compute-mode-in-one-click/
Still running only 175~176MH/s instead of 182~183 before, but yeah, it will do for now.

I reach 33,1 MH/s per card with exactly the same setup here my settings for Claymore :

-dcri 24 -cclock 1220 -mclock 2200 -cvddc 900 -tt 65 -strap 2 -rxboost 1

What GPU can reach such speed ?

Guigs321

newbie

Activity: 41

Merit: 0

Quote from: JoWannes on September 22, 2019, 04:51:28 AM

Quote from: NCarter84 on September 21, 2019, 01:32:36 PM

Sounds like compute mode is on.

Thanks for the hint. The registry edits I found here fixed it for me: https://monero.farm/disable-crossfire-and-enable-compute-mode-in-one-click/
Still running only 175~176MH/s instead of 182~183 before, but yeah, it will do for now.

I reach 33,1 MH/s per card with exactly the same setup here my settings for Claymore :

-dcri 24 -cclock 1220 -mclock 2200 -cvddc 900 -tt 65 -strap 2 -rxboost 1

Binary100100

member

Activity: 180

Merit: 10

Quote from: NCarter84 on September 21, 2019, 01:32:36 PM

Quote from: JoWannes on September 21, 2019, 01:31:32 PM

So, my miner's motherboard died and SSD crashed. Got new motherboard and SSD today.
I had no backup of my previous system, so I reinstalled everything from scratch using latest versions.

Gigabyte GA-H110-D3A, 6x RX580 4GB

Before:
Win 10, I think build 1703 of 1709 (not sure)
AMD beta blockchain drivers
Claymore 11.9

Now:
Win 10 build 1903 (latest)
Latest AMD drivers
Claymore 15

Before I got +- 182MH/s ETH only (as expected for this rig), but now something like 72 (+-12 per card). Something's obviously off.

Quick suggestions on what I did wrong? Which OS version and driver version should I use? Thanks!

Sounds like compute mode is on.

I think that you mean it sounds like it's on Graphics and not Compute.
I'd also recommend trying the beta blockchain drivers again and see what the difference is.

Malwolficus

newbie

Activity: 1

Merit: 0

I’m running the latest version on Ubuntu 16, from command line, and none of the “tt” or “r” options seem to work. I have a card that stops hashing after an hour or two and a simple restart fixes it - but I have to restart the miner manually, no matter what I do the autorestart won’t autorestart. How can I go about troubleshooting why this command doesn’t work?

NCarter84

jr. member

Activity: 195

Merit: 4

Quote from: JoWannes on September 22, 2019, 04:51:28 AM

Quote from: NCarter84 on September 21, 2019, 01:32:36 PM

Sounds like compute mode is on.

Thanks for the hint. The registry edits I found here fixed it for me: https://monero.farm/disable-crossfire-and-enable-compute-mode-in-one-click/
Still running only 175~176MH/s instead of 182~183 before, but yeah, it will do for now.

Nice! Are you running any of the straps or rxboost?

JoWannes

newbie

Activity: 7

Merit: 2

Quote from: NCarter84 on September 21, 2019, 01:32:36 PM

Sounds like compute mode is on.

Thanks for the hint. The registry edits I found here fixed it for me: https://monero.farm/disable-crossfire-and-enable-compute-mode-in-one-click/
Still running only 175~176MH/s instead of 182~183 before, but yeah, it will do for now.

Topic: Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux) - page 82. (Read 6590757 times)